-
Extron electronic 68-713-01 - page 1
User Guide P/2 DA2xi MT Distribution Amplifier T wo Output VGA and Audio Distribution Amplifier 68-713-01 Rev . G 01 13 ...
-
Extron electronic 68-713-01 - page 2
Safety Instructions • English W ARNING : This symbol, , when used on the product, is intended to alert the user of the presence of uninsulated danger ous voltage within the product’ s enclosure that may pr esent a risk of electric shock. A TTENTION: This symbol, , when used on the pr oduct, is intended to alert the user of important operating a ...
-
Extron electronic 68-713-01 - page 3
FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part15 of the FCC rules. The ClassA limits provide r easonable protection against harmful interfer ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radi ...
-
Extron electronic 68-713-01 - page 4
Conventions Used in this Guide Notifications The following notifications are used in this guide: W ARNING: A warning indicates a situation that has the potential to result in death or severe injury . CAUTION: A caution indicates a situation that may result in minor injury . A TTENTION: Attention indicates a situation that may damage or destroy the ...
-
Extron electronic 68-713-01 - page 5
Contents Introduction ................................................... 1 Features ............................................................. 1 Installation ..................................................... 2 Connectors, Indicators, and Controls ................. 2 Mounting ............................................................ 5 UL ...
-
Extron electronic 68-713-01 - page 6
P/2 DA2xi MT User Guide • Introduction Intr oduction The Extron P/2 DA2xi MT is a distribution amplifier that accepts video input fr om a VGA, XGA, UXGA, or QXGA compatible PC and distributes the signal to separately buffer ed outputs. The output on the back of the unit can be extended with Extron VGA Series cables from 6 feet to 250 feet in len ...
-
Extron electronic 68-713-01 - page 7
Installation The Installation section describes: • Connectors, Indicators, and Controls • Mounting Connectors, Indicators, and Contr ols The front and r ear panels of the P/2 DA2xi MT are described below . A UDIO INPUT MONITOR LR P/2 DA2xi MT OUTPUT 1 ON 2 EXT POWER (see manual) 12V 0.2A MAX GAIN/PEAK OUT IMP 7 6 1 3 4 7 5 6 6 2 6 9 6 7 6 ...
-
Extron electronic 68-713-01 - page 8
e Power connector — Plug the external 12 V power supply , only when needed (see “Power and Signal indicator LED” on page 2), into this 2-pole captive screw connector . The included power supply is shipped with a plug installed. If you need to cut the DC output cord to a dif ferent length and r einstall the plug, refer to the following figure ...
-
Extron electronic 68-713-01 - page 9
f T wo-bank DIP switches — These switches affect only the video output ( g ), not the “monitor” output ( d ). The Gain/Peak DIP switch should be on (up) when the output cable is over 100 feet (30.5 m). The Out Imp DIP switch changes output impedance. If all connections and operations are corr ect, but the output device has no picture, switch ...
-
Extron electronic 68-713-01 - page 10
Mounting W ARNING: May result in serious injury . Installation and service must be performed by authorized personnel only (see UL rack mounting guidelines below . The P/2 DA2xi MT can be mounted on a rack shelf, under a desk or tabletop, or on a projector bracket. UL rack mounting guidelines The following Underwriters Laboratories (UL) guidelines p ...
-
Extron electronic 68-713-01 - page 11
Rack mounting For optional rack mounting, mount the P/2DA2xiMT on a19-inch, 1U RSF 123 rack shelf kit (part # 60-190-20 ), a universal RSU 126 1U 6-inch deep rack shelf kit (part # 60-190-10 ), or a universal RSU 129 1U 9.5-inch deep rack shelf kit (part # 60-190-01 ), as shown below . 1. Remove the rubber feet (if installed) and mount the un ...
-
Extron electronic 68-713-01 - page 12
Furniture mounting For optional furniture mounting, mount the unit using the mounting kit MBU 125 (part # 70-077-01 , provided with the P/2 DA2xi MT) as follows: 1. Attach the mounting brackets to the distribution amplifier with the provided machine screws, as shown below . INPUT MONITOR Figure 5. Furniture Mounting Option 2. If feet were pr evious ...
-
Extron electronic 68-713-01 - page 13
Refer ence Information Included Parts Included parts Replacement part number P/2 DA2xi MT 60-506-21 MBU 125 1U, 1/2 rack width under -desk mount kit 70-077-01 VGA-A M-M MD/6 6-foot 15-pin HD male-to-male VGA cable with audio 26-490-02 P/2 DA2xi MT Setup Guide Other Accessories Description Part number RSF 123 1U, 3.5” deep rack shelf kit 60-190-20 ...
-
Extron electronic 68-713-01 - page 14
Extron Headquarters +1.800.633.9876 (Inside USA/Canada Only) Extron USA - W est Extron USA - East +1.714.491.1500 +1.919.850.1000 +1.714.491.1517 F AX +1.919.850.1001 F AX Extron Europe +800.3987.6673 (Inside Europe Only) +31.33.453.4040 +31.33.453.4050 F AX Extron Asia 800.3987.6673 (Inside Asia Only) +65.6383.4400 +65.6383.4664 F AX Extron Japan ...
¿Tienes una pregunta acerca de Extron electronic 68-713-01?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Extron electronic 68-713-01, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Extron electronic 68-713-01 probablemente compartirá una forma de solucionarlo.