-
La Crosse Technology WT-5431 - page 1
WT-5431 433 MHz Radio Controlled Projection Alarm Instruction Manual ...
-
La Crosse Technology WT-5431 - page 2
2 TABLE OF CONTENTS Topic Page Inventory of Conte nts/ Addi tional Equi pment 3 About WW VB 3 Quick Set-U p Guide 4 Detailed Set-Up Guide Battery Installation 5-6 Program Mode Programming Sequence 6 Function Buttons 6 Time Zone Set ting 6-7 DST (Daylight Saving Tim e) Setting 7 Adjustable Snooze 7 Time Sett ing 7-8 Date Setting 8 12/24-Ho ur Settin ...
-
La Crosse Technology WT-5431 - page 3
3 INVENTORY OF CO NTENTS 1) WT-5431 Al ar m Clock 2) TX6U Remote temperature sensor 3) AC adapter/transformer (6V) 4) Instructi on manual a nd warranty card. ADDITIONAL EQUIPME NT (not included) 1) Three fres h 1.5V AA bat teries (optio nal for alarm clock) 2) Two fresh 1.5V AA batt eries (for rem ote sensor) FEATURES OF PROJECTION ALARM Operation ...
-
La Crosse Technology WT-5431 - page 4
4 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteri es and avoid rec hargeable batteries. 1. Have the indoor station and outdoor remote 3 to 5 ap art. 2. Batteries shoul d be out of both unit s fo r 1 0 m i nut es. 3. Place the batteries into the outdoor remote first then into the indoor station. (All outdoor remotes must be started before ...
-
La Crosse Technology WT-5431 - page 5
5 B attery Cover DETAILED SET-UP GUIDE Important: Insert batteries into the sensor first, then into the alarm clock. Do not press any buttons until remot e temperature is displayed. II. BATTERY INSTALLATION A. REMOTE TEMPERATURE SENSOR 1. Remove the battery cove r. Observing the correct polarity, install 2 AA batteries. The batteries w ill fit tigh ...
-
La Crosse Technology WT-5431 - page 6
6 is found during this period , the tower icon will no t appear and the clock will search again at 12:00 am t he next night. 6. Either wait for the WWVB reception or manually set the time and date, making sure to set the correct time zone. III. PROGRAM MODE To enter the Program Mod e hold down the “SET” button for 1 second, until the time zone ...
-
La Crosse Technology WT-5431 - page 7
7 3. From –5h to –8h, a US map with the highlighted time zone will also be displayed to the right of the time display. 4. Press and release the “ SET” button to confirm the time zone setting, and to advance to DS T (Daylight sa ving time) set ting. D. DST (DAYLIGHT SAVING TIME) SE TTING Note: The DST default is “On”, meaning that the WW ...
-
La Crosse Technology WT-5431 - page 8
8 2. Press and release the “ SET” button to confirm the hour setting, and to shift to select the minutes. 3. Press and release the “+” butto n to select the minutes. 4. Press and release the “ SET” button to confirm the time setting, and to advance to manually set the date. G. DATE SETTING Note: When the WWVB signal is found, that date ...
-
La Crosse Technology WT-5431 - page 9
9 IV. FEATURES & OPERATIONS A. FEATURES 1. Radio-co ntrolled tim e and date 2. Projection of time and/or remote temperature 3. EL backlig ht 4. Six modes of date/secon ds/temperature dis play 5. Indoor temperature 6. Remote outdoor tem perature 7. Dual alarms 8. Adjustable snooze B. RADIO-CONTROLLED TIME AND DATE 1. The projection alarm will au ...
-
La Crosse Technology WT-5431 - page 10
10 C. PROJECTION OF TIME AND/OR REMOTE TEMPERATURE 1. When plugged in to an AC outlet, th e projection alarm can continuously project the time and/or remote temperature. 2. When operating on batteries alon e, the projection alarm will on ly proj ect when a button is pressed. 3. The projection will auto-focus for display from three to six feet away. ...
-
La Crosse Technology WT-5431 - page 11
11 defect, but simply reflects the differen ce in measuring m ethods. The remote temper ature is designed for chang i ng temperature at a wide range . F. REMOTE TEMPERATURE 1. The projection alarm comes with a remo te tem perature sensor. When set up properly, the projectio n alarm will receive and display the remote temperature. 2. It is important ...
-
La Crosse Technology WT-5431 - page 12
12 2. ACTIVATING/DEA CTIVATING THE ALARM a. After entering the alarm setting mode, th e alarm is activate d (either ALM1 or AL M2). b. To toggle between activating and d eactivating the alarm, press either the ALM1 or ALM2 briefl y. “(((1)))” or “(((2)))” will be disp layed to the right of the time display when the alarm is activated. c. Wh ...
-
La Crosse Technology WT-5431 - page 13
13 V. MOUNTING THE REMOTE TEMPER ATURE SENSOR The Remote Tem perature Sensor can be mounted i n two ways: 1) with the use of screws, or 2) using the adhesive tape. A. MOUNTING WITH SC REWS 1. Remove the mounting brac ket from the Remote Temperatur e Sensor. The bracket sh ould snap off easily. 2. Place the mounting bracket over the desired locati o ...
-
La Crosse Technology WT-5431 - page 14
14 VI. MAINTENANCE & C ARE A. Extreme t emperatures, vibrations, a nd shock sh ould be av oided to preve nt damage to the units. B. Clean displays an d units with a soft, da mp cloth. Do not use sol vents or scouring agen ts—th ey may mark and damage the displays and casing s. C. Do not submerge in water. D. Immedi ately remove al l low power ...
-
La Crosse Technology WT-5431 - page 15
15 TROUBLESHOOTING Problem: The Projection is faint Solution: 1) Change inten sity setting 2) Use AC ada pter 3) Darken surroundings 4) Use fresh ba tteries (if AC is not used ) Problem: The LCD is faint. Solution: 1) Replace the batteries. Problem: “OFL” appears in the indoor t emperature LCD. Solution: 1) Move unit to an area with warmer o r ...
-
La Crosse Technology WT-5431 - page 16
16 SPECIFICATIONS FOR WT-5 431 Temperature: Measuring range: 32 ° F to 122 ° F with 0.1 ° F resolution (indoor) -21.8 ° F to 140 ° F with 0.1 ° F resolution (outdoor) (0 ° C to 50 ° C with 0.1 ° C reso lution) Checking intervals: Every 10 seconds indoor, 3 times in 10 minutes for remote temperature. Power source: AC Adapter (included) Inpu ...
-
La Crosse Technology WT-5431 - page 17
17 W AR R ANT Y IN F OR M AT I ON La Crosse Technology, Ltd provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship. This limited warranty begins on the original date of purchase, is valid only on products purchased and used in North America and only to the original purchaser of this produc t. T ...
-
La Crosse Technology WT-5431 - page 18
18 La Crosse Technology 2809 Losey Blvd. S. La Crosse, WI 54601 Phone: 608.782.1610 Fax: 608.796.1020 e-mail: support@lacrossetechnology.com (warranty work) sales@lacrossetechnology.com (information on other products) web: www.lacrossetechnology.com FCC ID: OMO-01RX (receiver) OMO-01T X (sensor ) THIS DEVICE COMPLIE S WITH PART 15 OF THE FCC RULES. ...
¿Tienes una pregunta acerca de La Crosse Technology WT-5431?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con La Crosse Technology WT-5431, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con La Crosse Technology WT-5431 probablemente compartirá una forma de solucionarlo.