-
Philips SWW1890 - page 1
Register your pr oduct and get support at www .philips.com/w elcome EN User manual 3 SWW1890 ...
-
Philips SWW1890 - page 2
...
-
Philips SWW1890 - page 3
3 Contents 1 Important 4 Safety 4 2 Y our Philips Wireless HD Net Connect 6 What is in the box 6 3 Overview 7 The transmitter 7 The receiver 7 4 Installation 9 Connect the transmitter to your computer 9 Connect the receiver to the HDTV set 9 5 Activate your Philips Wireless HD Net Connect and set up the link 10 T ur n on the power of y our HDTV 10 ...
-
Philips SWW1890 - page 4
4 Important Safety Instructions a Read these instr uctions. b Keep these instr uctions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water . f Clean only with dr y cloth. g Do not block an y ventilation openings. Install in accordance with the manufacturer’ s instr uctions. h Do not install near any heat source ...
-
Philips SWW1890 - page 5
5 m Unplug this apparatus dur ing lightning storms or when unused for long per iods of time . n Refer all ser vicing to qualied ser vice per sonnel. Ser vicing is required when the apparatus has been damaged in any way , such as power -supply cord or plug is damaged, liquid has been spilled or objects hav e fallen into the apparatus, the apparat ...
-
Philips SWW1890 - page 6
6 USB cable for the po wer supply of the transmitter (2 feet 1 inch / 1.5 meter s) P ower adapter for the receiv er Anchor s x 2 Screws x 2 Adhesive tape x 2 Quick Installation Guide Quick star t guide User manual 2 Y our Philips Wir eless HD Net Connect Congratulations on your purchase and welcome to Philips! T o fully benet from the suppor t t ...
-
Philips SWW1890 - page 7
7 The r eceiver T op view 1 LED indicator Displa ys the status of the receiver . 2 Po wer button with LED indicator Press to turn the receiver on/off or to standby mode . 3 INFO button Displays on the HDTV the connection status of the receiver . Rear view 1 DC IN connector Connect the pow er adapter of the receiver . 2 HDMI OUT connector Connect to ...
-
Philips SWW1890 - page 8
8 The Philips Wireless HD Net Connect gives you a total wireless solution to enjo y the content from your computer on y our HDTV . The transmitter can tr ansmit an uncompressed video content up to 23 feet (7 meters) without latency . The receiver can receiv e signals for viewing on your HDTV . All you need to do is: • Connect the transmitter to y ...
-
Philips SWW1890 - page 9
9 » The pow er LED indicator of the transmitter ashes in blue , then turns into solid blue when the connection is established. Connect the r eceiver to the HDTV set HDM I HDM I 1 Connect the receiver with the supplied HDMI cable: • Connect one end of the HDMI cable to HDMI OUT connector of the receiver . • Connect the other end of the HDMI ...
-
Philips SWW1890 - page 10
10 On screen displa y on HDTV On screen displa y Mode and status Standby mode: it is a pow er -saving mode . .... Star t up in progress: It takes 15-20 seconds. x and .... Searching availab le channels: It occur s when the link cannot establish o ver 80 seconds after initialization. HDMI CH1 On mode with unrecognized video format HDMI CH1 On mode b ...
-
Philips SWW1890 - page 11
11 LED indicator status of the receiv er Po wer LED Status LED Mode and status Solid red Off Standby mode for po wer - saving Flashing blue Flashing Setting up a Link between the transmitter and receiver Solid blue Flashing quickly On mode but without input from the computer/ source device Solid blue Flashing slowly On mode with unrecognized video ...
-
Philips SWW1890 - page 12
12 5 Hook the key holes at the back of the receiver on the screws. 6 Mount y our r eceiver Y ou can either mount the receiver on the wall or on the back of the HDTV . Mount y our receiv er on the wall 1 Select a spot near the HDTV . 2 Drill two holes in the wall. Make sure that the distance between the tw o holes is 1 25 / 32 ” (45mm) and the dia ...
-
Philips SWW1890 - page 13
13 6 Align the adhesive tape on the receiv er with the one on the HDTV until both the receiver and HDTV are mounted together rmly . Note • The use of adhesive tapes is an alternative mounting option when the receiver cannot be x ed. • When you mount the receiv er at the back of the HDTV , avoid b locking the ventilation holes of the HDTV ...
-
Philips SWW1890 - page 14
14 Operating frequencies: 5.15-5.25GHz / 5.725-5.825GHz Po wer supply: Input: A C 100~ 240V Output: DC 5V , 2A Operating temperature: 0~40°C/32~104°F T ransmitter interfaces A/V interfaces HDMI input: One (T ype A, Male) Po wer interface P ower input: The USB cable connected to the USB jack of the computer LEDs Status LED: 1 x blue LED Dimensions ...
-
Philips SWW1890 - page 15
15 IMPOR T ANT NO TE: Radiation Exposure Statement: • This equipment complies with FCC radiation exposure limits set for th for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm betw een the radiator & your body . • This transmitter must not be co-located or operating in conjunction with ...
-
Philips SWW1890 - page 16
16 Incidental, special and consequential damages are disclaimed where permitted by law . This warr anty gives you specic legal rights. Y ou may also hav e other r ights that var y from state to state . Recycling Y our product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose ...
-
Philips SWW1890 - page 17
17 9 Fr equently ask ed questions The pow er LED on the receiv er is not lit up in red in standb y mode . Make sure that there is pow er supply for the receiv er . The laptop scr een image is not full screen on m y TV . 1 Right-click on an open space on y our desktop. 2 Select Gra phics Options > Output to > Digital T elevision (Now the lapto ...
-
Philips SWW1890 - page 18
18 If the picture quality is poor , what do I do? • Make sure that the video scale and resolution of y our computer matches the resolution of your HDTV (See chapter ‘T echnical data’). • Make sure that the transmission r ange between receiver and transmitter is not over 23 feet (7 meters) tr ansmission distance . I cannot hear any sound or ...
-
Philips SWW1890 - page 19
19 For MA C operating system: MA C oper ating system detects the exter nal display equipment and switches to a better resolution automatically when y ou plug in the display cable to MA C ser ies. Note • If the MA C operation system does not detect the exter nal display automatically , click on > Prefer ence > Detect Displays . • This prod ...
-
Philips SWW1890 - page 20
20 ...
-
Philips SWW1890 - page 21
...
-
Philips SWW1890 - page 22
...
-
Philips SWW1890 - page 23
...
-
Philips SWW1890 - page 24
...
-
Philips SWW1890 - page 25
© 2011 K oninklijke Philips Electr onics N.V . All rights reserved. IFU_SWW1890_EN_V2.0 WK11472 ...
¿Tienes una pregunta acerca de Philips SWW1890?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Philips SWW1890, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Philips SWW1890 probablemente compartirá una forma de solucionarlo.