-
Nilfisk-ALTO MS Series - page 1
MS Series User's Manual LTO R www .altoproaudio.com V ersion 1.0 March 2006 English ...
-
Nilfisk-ALTO MS Series - page 2
1 SAFETY INSTRUCTIONS 1. Read Instructions All the safety and operation instructions should be read before using the product and retain them for future reference. 2. W ater & Moisture This product should not be used near water and will be protect from atmospheric agents in fixed or temporary installations. 3. Heat This product should be situate ...
-
Nilfisk-ALTO MS Series - page 3
2 T ABLE OF CONTENTS 1. INTRODUCTION.......................................................................................................................................................3 2. FEA TURES..................................................................................................................................................... ...
-
Nilfisk-ALTO MS Series - page 4
3 1. INTRODUCTION Thank you for purchasing L TO MS series speaker system. This series includes MS series cabinet and L TO MS1 speaker modeller . MS series cabinet is specifically designed for use in hi-quality performance site and the precise sound reinforcement commercial place. It includes five full range cabinets (MS12, MS15, MS152, MS153, and M ...
-
Nilfisk-ALTO MS Series - page 5
4 2. FEA TURES T rapezium configuration decreases the resonance of the standing wave in the cabinet. The cabinet uses hi-density matrix spray-paint technics The bottom bracket design makes mounting quickly and flexibly . HF compression driver and vented LF for fully professional performance. Steep slope of 12dB/octave crossover for a cleaner signal ...
-
Nilfisk-ALTO MS Series - page 6
QUICK ST ART MS Passive Full-range Speakers Stereo Power Amplifier speaker cable T ripod Mount Left Main Mix Output Right Main Mix Output Mixer T ripod Mount speaker cable 5 3 . QUICK ST ART Make all initial connections with all the equipment powered off, and ensure that all the main volume controls are turned completely down. -. For Passive Full-r ...
-
Nilfisk-ALTO MS Series - page 7
6 -. For Passive Subwoofer & Satellite Speakers 1). Connect one side of speaker cable to the Output CHA/CHB or Binding Post of your stereo power amplifier and the other side to the Input socket of your subwoofer , with the second speaker cable connect the Output of the subwoofer to the Input of satellite. 2) Connect the input terminal of L TO M ...
-
Nilfisk-ALTO MS Series - page 8
7 4. CONTROL ELEMENTS 4.1MS SERIES CABINET - P ASSIVE FULL-RANGE Speaker for MS12 / MS15 / MS152 / MS153/MS154 (1) INPUT : Receive the power coming from an external power amplifier (SPK +1/-1 connected; +2/-2 not connected). (2) THRU: Direct LINK for connect in parallel a second speaker cabinet (SPK +1/-1 connected; +2/-2 not connected). - P ASSIVE ...
-
Nilfisk-ALTO MS Series - page 9
8 4.2 L TO MS1 SPEAKER MODELLER - THE FRONT P ANEL 1. Gain Control This control adjusts the input gain by a range of -20 dB to +20dB. 2. Clip LED This LED lights up when the input signal is too strong. It warns that the output signal may cause distortion. Please attenuate the level of the input signal. 3. Presets Selector Via this knob, you can sel ...
-
Nilfisk-ALTO MS Series - page 10
9 5. INST ALLA TION AND CONNECTION 5.1 For MS Series Cabinets Please use only the power connectors to make connections with other signal source equipment for the MS series cabinets. The power connector has four terminals: 1+, 1-, 2+, 2-. In our cabinets, only 1+/1- are used to connect the Speaker+/Speaker-, and 2+/2- are not used. 5.2 For L TO MS1 ...
-
Nilfisk-ALTO MS Series - page 11
10 6. TECHNICAL SPECIFICA TION 6.1 MS1 SPEAKER TECHNICAL SPECIFICA TION Model Item MS12 MS15 2-way vented box 200W att AES Standard 400W att Peak 1 19dB SPL calculated 65Hz / 20kHz at -10dB 8 Ohm 2k5Hz / 12dB/Oct Electronic Dynamic Protection 12" woofer / 2" voice coil 1" Neodymium Driver / 1" voice coil 90 H x 60 V Elliptical h ...
-
Nilfisk-ALTO MS Series - page 12
Model Item 11 MS153 3-way vented box 400W att AES Standard 800W att Peak 123dB SPL calculated 50Hz / 20kHz at -10dB 8 Ohm or 4 Ohm 700Hz - 3kHz / 12dB/Oct Electronic Dynamic Protection 15" woofer / 2.5" voice coil 8" midrange / 2" voice coil 1" Neodymium Driver / 1" voice coil 90 H x 60 V 2 x SPK4 @ Power Input / Link ...
-
Nilfisk-ALTO MS Series - page 13
12 7.2 L TO MS1 TECHNICAL SPECIFICA TION AUDIO INPUT Connectors 1/4" jack T ype R filtered, servo balanced input Impedance 30 Kohm balanced, 22 Kohm unbalanced Max. input level +26 dBu balanced and Unbalanced CMRR T yp.40db,>55db@1khz AUDIO OUTPUT Connectors 1/4" jack T ypebalanced Min. output impedance 100 Ohm Max. output level +26 dB ...
-
Nilfisk-ALTO MS Series - page 14
No. 1, Lane 17, Sec. 2, Han Shi West Road, T aichung 40151 T aiwan http://www .altoproaudio.com T el: 886-4-22313737 email: alto@altoproaudio.com Fax: 886-4-22346757 c All rights reserved to AL TO. All features and content might be changed without prior notice. Any photocopy , translation, or reproduction of part of this manual without written perm ...
¿Tienes una pregunta acerca de Nilfisk-ALTO MS Series?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Nilfisk-ALTO MS Series, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Nilfisk-ALTO MS Series probablemente compartirá una forma de solucionarlo.