-
Axis Q6032 - page 1
USER MANUAL AXIS Q6032 PTZ Dome Network Camera ...
-
Axis Q6032 - page 2
About this document This manual is intended for administrators and users of AXIS Q6032 PTZ Dome Network Camera, and is applicable t o fi rmware 5.25 and later. It incl udes instruct ions for using and managi ng the product on your network. Previous experience of networking will be of use when using this product. Some knowledge of UNIX or Linux-ba ...
-
Axis Q6032 - page 3
AXIS Q60 32 PTZ Dome Netw ork Camer a T able o f contents H a r d w a r e o v e r v i e w ....... ................... ................ 4 C o n n e c t o r s ............. .......... ............ ............. .... 4 L E Di n d i c a t o r s ........... .......... ............ ............. .... 5 A c c e s s i n g t h e p r o d u c t .... ......... ...
-
Axis Q6032 - page 4
AXIS Q60 32 PTZ Dome Network Camer a H a rd w a re ov e r v i ew Hardware overview 1 2 3 4 5 6 7 1 Part num ber ( P/N) & Serial number (S/N) 2 Network connector (PoE+) 3 Multi-connector 4 SD card slot 5 Status LED indicator 6 Control button 7 Power button Connectors Network connector - RJ-45 Ethernet connector. Supports Power over Etherne t Plu ...
-
Axis Q6032 - page 5
AXIS Q60 32 PTZ Dome Network Camer a H a rd w a re ov e r v i ew • Connecting to an AXIS Video Hosting System s ervice, see page 40 . To connect, press and hold the button until the Status LED fl ashes green. • Connecting to AXIS Internet Dynamic DNS Service, see page 41 . To connect, press the button once. • Restoring the product to factory ...
-
Axis Q6032 - page 6
AXIS Q60 32 PTZ Dome Network Camer a A ccessing the pr oduct Accessing the product To install the Axis product, re fer to the Ins talla tion Guide supplied with the product. The product can b e used with most operating systems and browsers . The recommended browsers are Internet Explorer with Windows, Safari with Macintosh and Fire fox w ith other ...
-
Axis Q6032 - page 7
AXIS Q60 32 PTZ Dome Network Camer a A ccessing the pr oduct Access from the Internet Once connected, the Axis product is accessible on your local net work (LAN). To access the p roduct from the Internet you must con fi gure your network router to allo w incoming data traf fi c to the product. To do this, enable the NAT-trave rsal fea t ure , whi ...
-
Axis Q6032 - page 8
AXIS Q60 32 PTZ Dome Network Camer a A ccessing the pr oduct The Live View page If the Axis product has been customized to meet speci fi c requirements, not all the items described below will appear in the Live V iew page. The following provides an ov erview of each availabl e b utto n. Controls on the Live View page The Stream Pro fi le drop-dow ...
-
Axis Q6032 - page 9
AXIS Q60 32 PTZ Dome Network Camer a A ccessing the pr oduct Activate the product’s fans with this button. Enable this button from Live View Con fi g > Action Buttons. The Fan button is activated automatically. Pres s this button to activate it manually. Enable or disable the Gatek eeper by selecting On or Off from the drop- down list. The Ga ...
-
Axis Q6032 - page 10
AXIS Q60 32 PTZ Dome Network Camer a A ccessing the pr oduct Click the Emulate joystick m ode button and click in the image to move the camera view in the direction of the mouse pointer. Click the Center mode button and click in t he image to cente r the camera view on that pos ition. Click the Ctrl panel button to open the PTZ control panel which ...
-
Axis Q6032 - page 11
AXIS Q60 32 PTZ Dome Network Camer a Media s treams Media streams The Axis product provid es several image and video stream form ats. Your requirements and the properties of your network will determine the type you use. The Live View page in the product provides access to H.264 and Motio n JPEG video streams, audio streams and to the list of availa ...
-
Axis Q6032 - page 12
AXIS Q60 32 PTZ Dome Network Camer a Media s treams T h eA M CC o n t r o lP a n e lc a nb eu s e dt oc o n fi gure va rious video and audio settings. Pl ease see the AXIS Media Control User’s Manual for more information. The AMC Control Panel is automatically instal led on fi rst use, after whi ch it can be con fi gured. Open the AMC Control ...
-
Axis Q6032 - page 13
AXIS Q60 32 PTZ Dome Network Camer a Media s treams Note • <ip>= IP addess • The Axis product supports QuickTime 6.5.1 and later. • QuickTime adds latency to the video stream (up to 3 seconds). • It may be possible to use other players to view the H.264 stream using the paths a bove, although Axis does not guarantee this. Accessing au ...
-
Axis Q6032 - page 14
AXIS Q60 32 PTZ Dome Network Camer a Settin g up the pr oduct Setting up the product The Axis product can be con fi gured by users with administrator or operator rights. Click Setup in the top right-hand corner of t h eL i v eV i e wp a g e . • Administrators have unrestricted access to all settings. • Operators have access to all settings exc ...
-
Axis Q6032 - page 15
AXIS Q60 32 PTZ Dome Network Camer a Video and A udio Video and Audio The video and audio settings can be used to optimize video and audio quality. You can con fi gure the following settings: • Video stream. See page 15 . •S t r e a m p r o fi les . See page 16 . • Camera settings. See page 16 . • Overlay image. See page 17 . •P r i v a ...
-
Axis Q6032 - page 16
AXIS Q60 32 PTZ Dome Network Camer a Video and A udio An image or text can be superimposed over the image as overlay. See Overlay, on page 17 . Save your settings befo re they can take effect. H.264 The GOV structure describes the composition of the video stream a nd setting the GOV-length to a higher value saves considerably on bandwidth but may h ...
-
Axis Q6032 - page 17
AXIS Q60 32 PTZ Dome Network Camer a Video and A udio Wide Dynamic Range Wide dynamic range can improve the exposure when there is a con siderable contrast between lig ht and dark a re as in the image. Exposure Setti ngs Con fi gure the exposure settings to suit the image quality require ments in relation to lighting, frame r ate and bandwidth con ...
-
Axis Q6032 - page 18
AXIS Q60 32 PTZ Dome Network Camer a Video and A udio Overlay image An overlay image can be us ed to provi de extra in forma tion, or to mask a part of the vid eo image. To use your own image, such as a logo, fi rst upload the image to the Axis product. Go to Video & Audio > Overla y Image ,b r o w s ef o r a n du p l o a dt h ei m a g e ? ...
-
Axis Q6032 - page 19
AXIS Q60 32 PTZ Dome Network Camer a Video and A udio For more inform ation about t he se se ttings, p lease see the online help . Audio Input An external microphon e or a line source can be connected to the product’s Audio-in connector. Con fi g u re the audio input s e ttings under Video & Audio > Audio Settings . Note A multi-connector ...
-
Axis Q6032 - page 20
AXIS Q60 32 PTZ Dome Network Camer a Video and A udio Audio Clips An audio clip is a sound fi le that can be played either when a n event occurs or manually from the Live View page. Audio clips can be uploaded to the product or recorded by a microphone connected to the prod uct. You can add, play, download, modify and remove audio clips from Video ...
-
Axis Q6032 - page 21
AXIS Q60 32 PTZ Dome Network Camer a Live Vie w Con fi g Live View Con fi g You can customize the Live View page and alter it to suit your requirements. It is possible to de fi ne the following features of t h eL i v eV i e wp a g e . •S t r e a m P r o fi le. See page 16 . • Default Viewer for Browser. See page 21 . • Viewer Settings. Se ...
-
Axis Q6032 - page 22
AXIS Q60 32 PTZ Dome Network Camer a Live Vie w Con fi g Browser Viewer Description AMC Recommended viewer in Internet Explorer (H.264/Motion JPEG) QuickTime H.264 Java applet A slower imaging alternative to AMC. Requires one of the following installed on the client: • JVM (J2SE) 1.4.2 or higher • JRE (J2SE) 5.0 or higher Windows Internet Expl ...
-
Axis Q6032 - page 23
AXIS Q60 32 PTZ Dome Network Camer a Live Vie w Con fi g Note A multi-connecto r cable (available from Axis) is required wh en connecting external I/O devices to the Axis product. See Multi-Connector Cable (sold separately), on page 48 23 ...
-
Axis Q6032 - page 24
AXIS Q60 32 PTZ Dome Network Camer a PTZ (P an Tilt Zoom) PTZ (Pan Tilt Zoom) Preset positi ons A preset position is a prede fi ned view that can be used to quickly steer the camera to a speci fi c location. Preset positions can be accessed in several ways: • By selecting the preset from the Preset posi tions drop-down list in the Live View Pag ...
-
Axis Q6032 - page 25
AXIS Q60 32 PTZ Dome Network Camer a PTZ (P an Tilt Zoom) the most movement w ill b e followed. Autotracking continues until the moving object stops or disap pears from the monitored area. Movement in areas blocked by privacy masks and i n exclude areas does not trigger autotracking . It is strongly recommende d to enable the PTZ Control Queue if a ...
-
Axis Q6032 - page 26
AXIS Q60 32 PTZ Dome Network Camer a PTZ (P an Tilt Zoom) 90° -90° -180°/180° 0° 90° -90° -180°/180° 0° A B B A 1 2 Top view A Pan limit star t B Pan limit end Guard Tour A guard to ur displays the video stream from differ ent preset po si tions, one-by -one, in a prede termin ed order or at ra ndom and for con fi gurable time periods. T ...
-
Axis Q6032 - page 27
AXIS Q60 32 PTZ Dome Network Camer a PTZ (P an Tilt Zoom) 1. Go to P T Z>G u a r dT o u r and click Add . 2. Select Create a record tour and click OK . 3. Enter a descriptive name. 4. Specify the pause length between runs. 5. Click to start r ecording the Pan/Tilt/Zoom movements. 6. When satis fi ed, click . 7. Click OK . Note Only the name of ...
-
Axis Q6032 - page 28
AXIS Q60 32 PTZ Dome Network Camer a PTZ (P an Tilt Zoom) Deselect the options under Enable/Disable controls to disable the pan, tilt, zoom, focus and iris controls. Note Disabling PTZ controls will not affect preset positions. For example, if the tilt control is disabled, the product can still move to preset positions that require a tilt movement. ...
-
Axis Q6032 - page 29
AXIS Q60 32 PTZ Dome Network Camer a Applications Applications Third party applications can be uploaded to and installed on the Axis pro duct. For more inf ormation, go to www.axis.com/a pplications To upload an application, go to Applications > Packages , click Browse to locate the fi le and then click Upload Package . Click on the uploaded ap ...
-
Axis Q6032 - page 30
AXIS Q60 32 PTZ Dome Network Camer a Ev e n ts Events Prede fi ned parameters, known a s an Event or Event Type , can trigger actions in the Axis product. A common event type is an alarm that causes the product to upload im ages to an Event Server . Triggered events - are activated by a signal, for example motion detection. Scheduled events - run ...
-
Axis Q6032 - page 31
AXIS Q60 32 PTZ Dome Network Camer a Ev e n ts Server type Purpose Information required FTP Server • Receives uploaded images • Descriptive name • Network address and upload path • User name and passwo rd HTTP Server •R e c e i v e s n o t i fi cation messages • Receives uploaded images • Descriptive name • URL (IP address or host ...
-
Axis Q6032 - page 32
AXIS Q60 32 PTZ Dome Network Camer a Ev e n ts 8. Click OK to save the event. Note • Up to 10 e vent types can be con fi gured, and up to 3 of these can be con fi gured to upload images. • File names can be formatted according to speci fi c requirements. S ee File Naming & Date/Time Formats in the online help. Set up a scheduled event A ...
-
Axis Q6032 - page 33
AXIS Q60 32 PTZ Dome Network Camer a Ev e n ts Gatekeeper The Gatekeeper monitors an area such as an entrance gate. It can pan, tilt and zoom in, and take a snapshot of, for example, a face, trigger ed by movement in the area. The c ame ra will then au to matically return to the home p ositio n and continue to overview the monitored area. To con ? ...
-
Axis Q6032 - page 34
AXIS Q60 32 PTZ Dome Network Camer a Ev e n ts Motion detection parameters The parameters controlling motion dete ction are described in the table below: Parameter Object Size History Sensitivity Description Object size r elative to window size. Object memory length. Difference in luminance between background and object. High level (100%) Only very ...
-
Axis Q6032 - page 35
AXIS Q60 32 PTZ Dome Network Camer a Ev e n ts Audio d etection The Axis product can be con fi gured to generate an alarm when audio rises above, falls below or passes the audio alarm level .T h e alarm level can be set in the range 0–100 where 0 is th e most sensitive and 100 the least sensitive. 1. Go to Events > Audio Detection . 2. Set th ...
-
Axis Q6032 - page 36
AXIS Q60 32 PTZ Dome Network Camer a Re c o rd in g s Recordings If using an SD card, the Axis product can b e con fi gured to record video continuously or as a r esult of a triggered or scheduled event: • To start a continuous recording, see page 37 . • To set up triggered and scheduled events, see Events, on page 30 . • To access event rec ...
-
Axis Q6032 - page 37
AXIS Q60 32 PTZ Dome Network Camer a Re c o rd in g s Continuous recording I fu s i n ga nS Dc a r d ,t h eA x i sp r o d u c tc a nb ec o n fi gured to continuously save video to the ca rd. To prevent the disk fro m becoming full, it is recommended to enable automatic disk cleanup under System Options > Storage . To start a continuous recordin ...
-
Axis Q6032 - page 38
AXIS Q60 32 PTZ Dome Network Camer a System Options System Options Security Users User access control is enabled by default and can be con fi gured under System Options > Security > Users . An administrator can set up other users by giving them user names and passwords. It i s also po ssible to allow a nonymous viewer login, which means that ...
-
Axis Q6032 - page 39
AXIS Q60 32 PTZ Dome Network Camer a System Options To access a network protected by IEEE 802.1X, devices must auth enticate themselves. The authentication is performed by a third-party e ntity called an authentic ation server , typically a RADIUS server , examples of which are FreeRADIUS and Microsoft Internet Authentication Service. In Axis' ...
-
Axis Q6032 - page 40
AXIS Q60 32 PTZ Dome Network Camer a System Options • Synchronize with c omputer time sets date and time according to the computer’s clock. With this option, date and time are s et once and will not be updated automatically. • Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are up ...
-
Axis Q6032 - page 41
AXIS Q60 32 PTZ Dome Network Camer a System Options AVHS is ena bled by d efa ult. The settings a re con fi gured under System Options > Network > TCP IP > Basic . One-click enabled - Press the product’s control button (see Hardware overview, on page 4 ) to connect to an AVHS service over the Internet. Once registered, Always will be en ...
-
Axis Q6032 - page 42
AXIS Q60 32 PTZ Dome Network Camer a System Options Link-Local IPv4 Address Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the p roduct from other hosts on the same seg m ent on the loca l network. The product can have a Link-Local IP and a static or DHCP-supplied IP addre ...
-
Axis Q6032 - page 43
AXIS Q60 32 PTZ Dome Network Camer a System Options Note This FTP server has nothing to do with the product’s ability to transfer image s v ia FTP to other locations and servers. RTSP The RTSP server running in the Axis product allows a connecting client to start an H.264 stream. The RTSP port number can be changed under System Options > Netwo ...
-
Axis Q6032 - page 44
AXIS Q60 32 PTZ Dome Network Camer a System Options The following traps are availa ble: •C o l d s t a r t •W a r m s t a r t •L i n k u p • Authentication failed SNMP v3 provides encryption and secure passwords. To use traps w ith SNM P v3, an SNMP v3 management application is required. To use SNMP v3, HTTPS must be enabled, see HTTPS, on ...
-
Axis Q6032 - page 45
AXIS Q60 32 PTZ Dome Network Camer a System Options Ports & Devices I/O Ports The Axis product provides four con fi gurable input and output ports for connection of external devices. A multi-connector cable (available fr om Axis) is requir ed when connecting externa l devices, see Multi-Connector Cable (sold separately), on page 48 . The I/O p ...
-
Axis Q6032 - page 46
AXIS Q60 32 PTZ Dome Network Camer a System Options System Log - Provides information about system events. Access Log - Lists all failed attempts to access the pro duct. The Access Lo g can also be con fi gured to l ist all connections to the product (see below). Server Report - Provides information about the prod uct status in a popu p window. Th ...
-
Axis Q6032 - page 47
AXIS Q60 32 PTZ Dome Network Camer a System Options File Upload Files, f or exam p le web pages and im age s, can be uploaded to the Axis product a nd used as custom settings. To upload a fi le, go to System Options > Advanced > File Upload . Uploaded fi les are accessed through http://<ip address>/local/<user>/<file name> ...
-
Axis Q6032 - page 48
AXIS Q60 32 PTZ Dome Network Camer a Multi-Connector Cable (sold separ ately) Multi-Connector Cable (sold separately) When connecting external equipment to the Axis product, a multi-connector cable (available from Axis) is required in order to maintain the product’s IP rating. The multi-connect or cable can be purchased from your Axis reseller. C ...
-
Axis Q6032 - page 49
AXIS Q60 32 PTZ Dome Network Camer a Multi-Connector Cable (sold separ ately) Connection diagram: A I/O con fi gured as input B I/O con fi gured as output I/O connector DC power input AC po wer input 49 ...
-
Axis Q6032 - page 50
AXIS Q60 32 PTZ Dome Network Camer a T r oubleshootin g Troubleshooting Checking the fi rmware Firmware is software that determi nes the functionality of networ k device s. One of your fi rst actions when troubleshooting a problem should be to check the current fi rmware version. The latest version ma y c onta in a correction that fi xes your p ...
-
Axis Q6032 - page 51
AXIS Q60 32 PTZ Dome Network Camer a T r oubleshootin g ping -s 408 <IP address> In Windows , type the following from a command/DOS prompt: arp -s <IP address> <serial number> temp ping -l 408 -t <IP address> 2. If the product does not reply w ithin a few seconds, res tart it and wait for a reply. Press CTRL+C to stop Ping. ...
-
Axis Q6032 - page 52
AXIS Q60 32 PTZ Dome Network Camer a T r oubleshootin g Problems with the H.264 format Check that the relevant H.264 connection methods and correct interface are enabled in the AMC Control Panel (streaming tab). See AX IS Media Control (AM C), on page 11 . In the AMC Control Panel, select the H.264 tab and click Set to default H.264 decoder . No H. ...
-
Axis Q6032 - page 53
AXIS Q60 32 PTZ Dome Network Camer a T r oubleshootin g Slow image update Con fi guring pre-buffe rs, motion de tectio n, high-re solution imag es or high fram e rates will affect the performance of the Axis product. Poor perfo rmance Poor performance ma yb ec a u s e db yh e a v yn e t w o r kt r a f fi c, multiple users accessing the product, l ...
-
Axis Q6032 - page 54
AXIS Q60 32 PTZ Dome Network Camer a T echnical Speci fi cations Technical Speci fi cations Function/group Item Speci fi cations Models AXIS Q6032 60 Hz AXIS Q6032 50 Hz Image sensor 1/4” ExView HAD Progressive scan CCD Lens Varifocal f=3.4 – 119 mm F1.4 — 4.2 Autofocus Automatic day and night functionality Horizontal angle of view: 1.7° ...
-
Axis Q6032 - page 55
AXIS Q60 32 PTZ Dome Network Camer a T echnical Speci fi cations Function/group Item Speci fi cations Security Password protection, IP address fi ltering, HTTPS encryption*, IEEE 802.1X netwo rk access control*, digest authentication, user access log *This product includes software develope d by the Open SSL Project for use in the Open SSL Toolk ...
-
Axis Q6032 - page 56
AXIS Q60 32 PTZ Dome Network Camer a T echnical Speci fi cations Function/group Item Speci fi cations FCC Part 15 Subpart B Class B ICES-003 Class B VCCI Class B C-tick AS/NZS CISPR 22 KCC Class B EN 60950–1 (IEC 60950–1) IEC 60529 IP52 IEC 60721–4–3 Class 3K3, 3M3, EN/IEC 60068–2 Midspan: GS, UL, cUL, UL-AR, CE, V CCI, CB, KCC Weight C ...
-
Axis Q6032 - page 57
User Manual Ver. M1.6 AXIS Q6032 P TZ Dome Network Camera Date: May 2011 © Axis Communications A B, 2011 Part No. 42 961 ...
¿Tienes una pregunta acerca de Axis Q6032?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Axis Q6032, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Axis Q6032 probablemente compartirá una forma de solucionarlo.