-
Humax VA-ACE - page 1
V A-ACE Digital Set-T op Box with V iaccess embedded ...
-
Humax VA-ACE - page 2
Contents Safety Copyright & Glossary Reference STB Connections Remote Control Unit Guide of Functions Guide of Main Menu Motorised System T roubleshooting Guide Menu Map Specification E2 E3 E4 ~ E5 E6 ~ E8 E9 ~ E10 F1 1 ~ F13 F14 ~ F32 F33 ~ F37 F38 F39 ~ F40 F41 ~ F42 E1 ...
-
Humax VA-ACE - page 3
Safety This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully . MAINS SUPPL Y : 90 - 250 V AC 50/60 Hz OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. LIQUIDS : The STB shall not be exposed to dripping or s ...
-
Humax VA-ACE - page 4
Copyright & Glossary E3 • VIACCESS TM is a trademark of France T elecom. • CryptoWorks(TM) is a trademark of Philips Electronics N.V . • Irdeto is a trademark of Mindport BV . • Nagravision is a registered trademark of Kudelski S.A. • Conax is a trademark of T elenor Conax AS. HUMAX cannot be held responsible for any kind of problems ...
-
Humax VA-ACE - page 5
Reference E4 All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennas to be connected to the STB simultaneously . If you have two or more fixed antennas or LNBs, you can use a DiSEqC 1.0 switch. 1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch. 2. Connect the ...
-
Humax VA-ACE - page 6
Reference HUMAX digital set-top box is a highly sophisticated product - incorporating one of the best software applications. Whenever a problem is found with this software or , in fact, extra functions or enhanced applications are added, the software in the equipment has to be upgraded. In order to maintain proper performance of the product, it is ...
-
Humax VA-ACE - page 7
, Press to change services down and up. SMART CARD SLOT Insert the SMART CARD with it’s IC-Chip part facing the botton side. ERROR LED(AMBER) Indicates that the STB has an error . ST ANDBY LED(RED) Indicates that the STB is under standby . OPERA TING LED(GREEN) Indicates that the STB is operating. TV/RADIO Press to switch between TV and Radio mod ...
-
Humax VA-ACE - page 8
STB Connections 1. Connect one end of RCA/Cinch cable to the RCA/Cinch socket on the STB and the otherend to a RCA/Cinch socket on your TV . If your TV doesn’t have a RCA/Cinch socket, connect one end of RF cable to the RF OUT on STB and the other end to a RF input socket on your TV . 2. Connect the coaxial cable from the LNB to the LNB IN socket ...
-
Humax VA-ACE - page 9
TV with Motorised System(DiSEqC 1.2) 1. Connect one end of a RCA/Cinch cable to the RCA/Cinch connector on the STB and the other end to a RCA/Cinch socket on your TV . 2. Connect one end of a RCA/Cinch cable to the RCA/Cinch connector on the STB and the other end to a RCA/Cinch socket on your VCR. 3. Connect the coaxial cable from the LNB of your m ...
-
Humax VA-ACE - page 10
Remote Control Unit E9 ...
-
Humax VA-ACE - page 11
NUMERIC BUTTONS Press to select a service, enter your PIN code or Numerics on the menu. INFORMA TION(RED) Press to display the programme information box on the screen. This button functions same as the RED button on the menus. SOUNDTRACK(GREEN) Press to display the soundtrack list for the current service. And this button functions same as the GREEN ...
-
Humax VA-ACE - page 12
Guide of Functions The details of service part and event part are automatically displayed on the I-Plate when pressing the i ( )button or changing services. I-Plate is divided into service part and event part. SERVICE P ART consists of the following items: • I-Plate icon, Current time • Service name, Service number , icons • Subtitle, T elete ...
-
Humax VA-ACE - page 13
T o change services, do in the following sequence: 1. Press the Numeric buttons(0~9) on the remote control unit. 2. Press the buttons or buttons. Or press the Recall ( ), Service-list( ), EPG ( )mode button. T o switch between TV and Radio services, press the TV/Radio ( )button. T o select the previous viewed service, press the Recall ( )button. T ...
-
Humax VA-ACE - page 14
Guide of Functions Use your TV remote control unit to control the T eletext service. The teletext button doesn’t exist on the STB remote control unit. When the service supports T eletext, the T eletext icon( ) is displayed on the I-plate. The Service List consists of Service All and Service Favourite. On the service list, you can change the attri ...
-
Humax VA-ACE - page 15
Y our STB has an Electronic Programme Guide(EPG) to help you navigate through all the possible viewing options. The TV Guide supplies information such as programme listings and start and end times for all available services. In addition, detailed information about the programme listings and start and end times for all available services. In additio ...
-
Humax VA-ACE - page 16
Guide of Main Menu Y ou can watch a programme being shown and reserve it in the TV Guide mode. T o enter the TV Guide mode Press the EPG ( )button on the remote control unit or select the TV Guide on the Main Menu. T o select the TV/Radio Guide Press the button on the remote control unit and TV Guide will be switched to the Radio Guide. TV Guide mo ...
-
Humax VA-ACE - page 17
Shows the information of programmes that will be played for a week. Select a day you want using the buttons. T o watch and reserve a programme you want, do the same steps with the Now/Next mode. Shows the programme lists that you have already reserved on the TV Guide or Information Box. Maximum twenty programmes can be reserved. This programme list ...
-
Humax VA-ACE - page 18
Guide of Main Menu Y ou can set a parental guidance rating to each programme in this mode. 1. When the OK button is pressed after selecting the highlighted parental control on the initial menu screen, a display window for entering the PIN code will appear on the centre of screen. ** The default PIN code is . 2. Enter the PIN code on the display win ...
-
Humax VA-ACE - page 19
Select the language for menu, audio or subtitle. 1. Select the highlighted language setting using the buttons in the system setting mode and then press the OK button. 2. Select the highlighted Menu(or Audio, Subtitle) Language and press the buttons and the language list will be displayed. 3. Use the buttons to move to a language you want and then p ...
-
Humax VA-ACE - page 20
Guide of Main Menu Y ou can set the Current T ime and W akeup T ime in this mode. Furthermore, the Service Number in the W akeup T ime mode and Sleep T ime(standby mode) can be set. When a VCR is connected, recording can be automatically done according to W akeup/Sleep T ime Setting. T o set the Current T ime, enter the Offset value using the stand ...
-
Humax VA-ACE - page 21
Set the audio mode which is output from the RCA/Cinch Jack. (Stereo/Mono) Select the aspect ratio of TV which is connected to STB (4:3 or 16:9). Select the format which the video is to be displayed on screen. When your TV set is 4:3 and video source is 16:9, STB will display in Letter-box or Centre mode as selected. When your TV set is 16:9 and vid ...
-
Humax VA-ACE - page 22
Guide of Main Menu Select an UHF channel. The range of channels and frequency value are different for each P AL standard: P AL I/G for Europe : CH21 ~ CH69 P AL B for Europe/Australia : CH28 ~ CH69 P AL D for China : CH13 ~ CH62 P AL K for Russia : CH21 ~ CH69 Select a P AL standard according to the above range of channels. Adjust the Fine T uning ...
-
Humax VA-ACE - page 23
3-2. Service Organising This menu gives users access to options that allow them to organise their Networks, TV Services and Radio Services. ** The default PIN code is . This mode allows users to Delete, Move, Lock, Skip and Rename TV Services. • Delete 1. Press the Red ( )button to delete unwanted services. 2. Highlight the services that you want ...
-
Humax VA-ACE - page 24
Guide of Main Menu • Rename 1. Press the White ( )button to change the service name. Then, the keyboard image will be displayed on the screen. 2. Key in the new service name. Y ou can use the four direction keys to move or select the services. : to move the previous service : to move the next service : to move back by 10 services : to move forwar ...
-
Humax VA-ACE - page 25
The Organise Radio Services functions same as TV Services except that it uses Radio Services. Y ou can delete or move Radio Services and change the attributes of them. The Organise All Services lets the user Delete, Move, Lock, Skip or Rename Radio Services on the All Radio Services list. The Organise Favourite Radio Services lets the Delete, Move, ...
-
Humax VA-ACE - page 26
Guide of Main Menu Selects the antenna and LNB settings for service search. As you can change the settings for 22KHz T one and DiSEqC switch, there are 32 possible Antenna Setting for use. The values that are set in this menu will be available for selection in other service searching menus. There are 32 antenna alternatives, each one can have diffe ...
-
Humax VA-ACE - page 27
When you use a dual LNB or two antennas connected to a 22KHz T one switch box, make 22KHz T one switch Enable or Disable to select LNB or antenna. According to the option and position of DiSEqC switch, select Disabled, T one Burst A to B and DiSEqC A to D. After setting the above mentioned value, press the OK button to move to the Manual Search men ...
-
Humax VA-ACE - page 28
Guide of Main Menu Set the search parameters(Frequency , Symbol Rate, etc.) to manually find the services that you have selected in the transponder . The bar on bottom of the submenu shows the signal Level and signal quality(BER) of the entered parameters. Select the target antenna for Manual Search. The Satellite Name helps you select antenna alte ...
-
Humax VA-ACE - page 29
• Y ou can select Y es or No. When you select “Y es”, you can find more transponders using the home network. • As it refers to NIT during searching, if there is the frequency information of other transponder , it searches the other transponders besides the transponder that the user inputs. • Y ou can select Y es or No. When you select “ ...
-
Humax VA-ACE - page 30
Guide of Main Menu When you enter the Satellite Name that is set in Antenna Setting menu, search all of the selected satellite without inputting the extra frequency . Select the target antenna for Automatic Service Search. The attribute of this antenna alternative number is already set in Antenna Setting menu and the Satellite Name is helpful in th ...
-
Humax VA-ACE - page 31
3. Press the Red ( )button for confirmation, and you will successfully exit from input mode. If press the OK button at symbol rate value input mode, the value will be confirmed, and if you moves left or right column use the buttons, you can differ values of symbol rate to input. Then press the EXIT and the Red ( )button to exit from input mode. T o ...
-
Humax VA-ACE - page 32
Guide of Main Menu Y ou can download and upgrade the software of this STB via ASTRA 1 satellite when the software of new version is released. Do not turn off the STB during downloading. When the power is switched OFF , turn on the STB and the process will be continued. 3-5. Conditional Access(for Viaccess Embedded) This menu allows the user to view ...
-
Humax VA-ACE - page 33
3-6. Default setting When you press the OK button at the screen, the data of system setting will be changed into the default values and some Free-T o-Air services of EUTELSA T W4(ASTRA 1 for Middle East areas) will be stored in replacement of all services found. If you press the EXIT button, the function will be cancelled and return the Installatio ...
-
Humax VA-ACE - page 34
Motorised System DiSEqC 1.2 User Instructions If you have a DiSEqC 1.2 motorised system, then you can use the DiSEqC 1.2 functions available. The following instruction describes how to use the DiSEqC 1.2 functions to store the positions of the satellites and to search for the services(ST AB Rotor Sat motor recommended). When DiSEqC Motorised System ...
-
Humax VA-ACE - page 35
3. Initial Satellite Position Search This is required when you first set your receiver up to use DiSEqC 1.2 and sets the positions of all pre-programmed satellites. 1. Make sure your motor is installed correctly with the calibrations adjusted for the region you are situated. (Please consult the user manual for your motor .) 2. Make sure your receiv ...
-
Humax VA-ACE - page 36
Motorised System 6. T o set the East Limit: a) Select Movement and use the buttons to move your motor East or West until the motor is at the position you wish to use as your East Limit. Use the buttons to stop the motor at the correct position. b) Highlight the Store East Limit option and press the OK button to store the current position as your Ea ...
-
Humax VA-ACE - page 37
Once you have stored the positions of the satellites you want (see left below) you can now search for the services transmitted from them. Before you can do this, you must move the motor to the position of the satellite you wish to search. T o do this, you must access the Satellite Settings menu. Do as follows ; 1. Select Service Searching from the ...
-
Humax VA-ACE - page 38
Motorised System It is possible to use automatic search using the DiSEqC 1.2 motorised system. 1. Ensure that the positions for the satellite you want to search is correct. (see Section 3 and 5 above) 2. In the Main Menu, select the option channel searching and press the OK button. 3. In the Service Searching menu, select the Antenna Alternative th ...
-
Humax VA-ACE - page 39
T roubleshooting Guide E38 ...
-
Humax VA-ACE - page 40
Menu Map E39 ...
-
Humax VA-ACE - page 41
E40 ...
-
Humax VA-ACE - page 42
Specification T uner & Channel MPEG T ransport Stream A/V Decoding Memory Input Connector Frequency Range Input Impedance Signal Level IF IF Band width LNB Power & Polarisation 22 KHz T one DiSEqC Control Demodulation Input Symbol Rate FEC Decode T ransport Stream Profile Level Input Rate Aspect Ratio Video Resolution Audio Decoding Audio M ...
-
Humax VA-ACE - page 43
A/V & Data In/Out Physical Specification Size(W x H x D) Weight(Net) Operating T emp Storage T emp Storage Humidity 260 x 50 x 180 mm Around 1.3 kg 0 °C to + 45 °C -10 °C to + 70 °C 5% ~ 95% RH(Non-Condensing) Power Supply Input V oltage T ype Power Consumption Standby Power Protection 90 - 250 V AC, 50/60 Hz SMPS Max. 30 W ≤ 8 W Separate ...
-
Humax VA-ACE - page 44
HTV AACE.100E ...
¿Tienes una pregunta acerca de Humax VA-ACE?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Humax VA-ACE, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Humax VA-ACE probablemente compartirá una forma de solucionarlo.