-
Intel NSC2U - page 1
Intel ® IP Network Server NSC2U Configuration Guide System / Spares / Accessories List March 2008 Rev 2.2 Reference guide to assist customers an d the field in ordering the servers, accessories and spares ~Subject to Change Without Notice~ ...
-
Intel NSC2U - page 2
March 2008 INFORMATION IN THIS DOCUMENT IS PR OVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICE NSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR O THERWISE, TO ANY INTELLECTUAL PROPERT Y RIGHTS IS GRANTED B Y THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND COND ITIONS OF SALE FOR SU CH PRODUCTS, INTEL ASSUMES NO LIABILITY WHA TSOEVER, AND INTE ...
-
Intel NSC2U - page 3
Table of Contents I. INTRODUCTION .............................................................................................. 4 II. PRODUCTION SYSTEM SKUS ................................................................... 5 III. PRODUCTION SPARES/ACCESSORIES LIST ................................ 10 IV. QUAD PORT BYPASS NIC CAPABILITY .......... ...
-
Intel NSC2U - page 4
I. Introduction Product Description: The Intel® IP Network Server NSC2U system is the second generation product of 2U Intel® IP Network Server products, havi ng l ong product life and 20-inch depth chassis. This server combines network po rt density and processor performance in a compact 2U package. The NSC2U support s a number of processor speed ...
-
Intel NSC2U - page 5
II. Production System SKUs The NSC2U Production System SKUs that can be ordered are listed below: Product Identification Code Description MM# Min. Order Qty. NSCA0201W Intel® IP Network Server NSC2U, Base Model 0 with AC Power Suppl y 889358 1 NSCD0201W Intel® IP Network Server NSC2U, Base Model 0 with DC Power Suppl y 889357 1 See the NSC2U Base ...
-
Intel NSC2U - page 6
NSC2U Base Model 0 Configuration: All Production SKUs are base model 0 SKUs (n o p rocessor, heatsink, memory, hard drive, power cord, operating system, o r plug-in adapters are provided). Thos e components must be ordered separately as Accessories from Intel or from third party vendors listed in the Tested Hardware and Operating Sys tem List (THOL ...
-
Intel NSC2U - page 7
Notes on the NSC2U Model 0 Configuration and Options: PCI Risers o The base configuration comes standard with two PCI Risers supporting up to five PCI slots. These include: ¾ One low-profile riser supporting two PCI-Express (PCIe) slots ¾ One full-height, full-length riser su pporting three slots: two PCIe x4 and one PCI-X. o Additional full- ...
-
Intel NSC2U - page 8
IO Option Modules o These modules, available as optional accessories, attach to the s ystem board via a proprietary connector, and provide additional IO through the rear bulkhead. ¾ The AXXGBIOMO option module provides two Gigabit E thernet NICs. ¾ The AXXSASIOMOD option module provides one x4 external SAS port. o For ordering details, refer ...
-
Intel NSC2U - page 9
Details on Ordering Processors: The NSC2U is designed for the Quad-Core Intel® Xeon® 5400 and 5300 processor series, and also supports selected SKUs from the Du al-Core Intel® Xeon® 5100 series processors. Ordering details for the supported processors for the NSC2U are listed below. These include the choice of either Tray (for OEMs ) or Boxed ( ...
-
Intel NSC2U - page 10
III. Production Spares/Accessories List Below are the Spare parts and Accessories that can be ordered with the NSC2U system. Any of these parts can be ordered as spares fo r part replacement purposes or as additional customer inventory. Some of the parts belo w are not included i n the NSC2U system base model and can be ordered as accessories for p ...
-
Intel NSC2U - page 11
Production Spares/Accessories List (continued) PID Order Code Description Contents Included in Base Model (Y/N) MM# Min. Order Qty PCI Risers and I/O Options ASR2500FHR SR2400 (2U) Full Height PCI-Expr ess riser (two PCI-Express slots, one PCI- X slot) Riser Y 880515 1 ADRACTRIS SR2500 (2U) Full Height PCI-X "active" high performance rise ...
-
Intel NSC2U - page 12
Production Spares/Accessories List (continued) PID Order Code Description Contents Included in Base Model (Y/N) MM# Min. Order Qty Spares NSCCBLMSCW NSC2U System Interconnect Cabl e Kit Flex cable (SAS interface, front panel signals), front panel power cable, serial port cable, CD-ROM cable, alarm cable, TAM module cable Y 889819 1 NSCFANSETW NSC2U ...
-
Intel NSC2U - page 13
IV. Quad Port Bypass NIC Capability This section is intended for customers that plan to us e the Quad Port NIC with Bypass capability on the NSC2U. It describes what pa rts must be ordere d to enable this capability. The NSC2U is capable of supporting: • Up to eight ports of front-accessible Gigabi t Ethernet (either Copper or Fiber) using Quad N ...
-
Intel NSC2U - page 14
Included in Min. PID Description Contents Order Code Base Model MM# Order (Y/N) Qty Fiber NIC EXPI9014PFBLK (Bypass rear access) Intel® PRO/1000 PF Quad Port Bypass Adapter (Fiber) – 5 Pack Quad-port design, based on two Intel® 82571GB dual-port PCI Express* GbE controllers N 876696 5 EXPI9024PFBLK (Bypass NIC-in-fro nt) Intel® PRO/1000 PF Qua ...
-
Intel NSC2U - page 15
Appendix A. Rack Mounting Options for 1U and 2U Intel® Communications Rack Mount Servers Rack mounting kits for 2-post or 4 -post, 19 -inch or 23-inch racks are offered for this product. Please refer to the tables bel ow fo r the correct options to s uit your needs. All rack mount kits listed are su itable for 1U and 2U Intel® Communicat ions Rac ...
-
Intel NSC2U - page 16
TMLCMOUNT21 The TMLCMOUNT21 kit mounts Intel® Communi cation Rack Mount Servers to a 2 -post, central office type, 19-in ch wide rack. This kit consists of L-shaped brackets that fasten to the sides of the server and to the rack. TMLCMOUNT21 3/28/2008 v 2.2 16 of 20 ...
-
Intel NSC2U - page 17
TMLPMOUNT41, TMLPMOUNT51 and TMLPMOUNT5 2 TMLPMOUNT 41/51/5 2 series mounts Intel® Communication Rack Mount Servers to 2- post or 4-post racks. TMLPMOUNT 41 and TMLPMOUNT 51 are used for mounting servers on 19-inch wide racks. These racks are considered standard EI A (universal hole spacing) racks. TMLPMOUNT 52 is used for mou nting servers on 23- ...
-
Intel NSC2U - page 18
The diagrams above summarize the components and “slide-in rail-type” system of th e TMLPMOUNT41. It can be adapted for a 2-post or 4-post installation. 3/28/2008 v 2.2 18 of 20 ...
-
Intel NSC2U - page 19
The main difference between the TMLPMOUNT41 and TMLPMOUN T51/52 series is that the TMLPMOUNT41 series uses a screw to lock the server in place using the Universal Mounting Bracket, whi lst the TMLPMOUNT51/52 seri es has an additional Slide Pul l-Out Locking feature. Universal Front Mount ing Bracket on the TMLPMOUNT41 Slide Pull-Out Locking feature ...
-
Intel NSC2U - page 20
TMLPSLIDE01 The TMLPSLIDE 01 is an accessory kit designed for use in con junction with slide rails to produce a rack mounted serviceable server. The TMLPSLIDE01 kit contains tw o Universal Front Mounting Brackets tha t secure the server to the front of the rack. The sliding rails and optional mounting brackets re quired to mount the server must be ...
¿Tienes una pregunta acerca de Intel NSC2U?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Intel NSC2U, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Intel NSC2U probablemente compartirá una forma de solucionarlo.