-
Mitsubishi Electronics XD3200U - page 1
EN-1 LAN Contr ol Utility User Manual (for XD3200U) Contents Pr eparation/SetUp ......................................................................... 2 Preparation befor e using the network function ........................................... 2 Connection .......................................................................................... ...
-
Mitsubishi Electronics XD3200U - page 2
EN-2 Pr eparation/SetUp Pr eparation before using the network function This projector is equipped with the network function to contr ol and monitor the projector’ s operations using a W eb browser and to send e-mail notification. Before using the network function, perform the following thr ee preparation steps. (1) Setup of the application softw ...
-
Mitsubishi Electronics XD3200U - page 3
EN-3 1 Copy two files (DI_4.1.3.6.msi and Setup.exe) contained in the T ools folder of CD-ROM to the har d disk of your personal computer . 2 Double-click the file named Setup.exe. 3 When the following window appears, click Next. Installation Before starting installation, be sur e to read “ReadMe.txt” contained in the CD-ROM. Connection Prepa ...
-
Mitsubishi Electronics XD3200U - page 4
EN-4 Preparation/SetUp (continued) 4 Select a folder to install the program, and click Next. 5 Click Next. 6 Installation starts. The progr ess of the installation process is • displayed as shown on the right. 7 When the installation process is completed, click Close. How to remove Pr ojector -Control Device Installer Select [Start] - [Control ...
-
Mitsubishi Electronics XD3200U - page 5
EN-5 1 Start the Projector -Control Device Installer . Select [Start] - [All Programs] - [Pr ojector] - • [Projector -Control Device Installer] (in the case of Windows ® XP). 2 Click the Search button. Projector is r ecognized. • (Note) When projector isn’ t recognized, check the following. The firewall function has been disabled. (Wh ...
-
Mitsubishi Electronics XD3200U - page 6
EN-6 5 Select [Obtain an IP address automatically] and click Next. 6 Click Next. Check that the options are marked with • checkmarks as shown on the right. Keep them unchanged for normal use. 7 Click Assign. 8 Click Finish. 9 Click the Search button. Check the IP address. • When using a DHCP server Preparation/SetUp (continued) ...
-
Mitsubishi Electronics XD3200U - page 7
EN-7 5 Select [Assign a specific IP address] and click Next. 6 Enter a fixed IP address (for example, 192.168.0.1) and click Next. (Note) Do not use 0 or 255 for the last digit of the IP address. 7 Click Assign. 8 Click Finish. 9 Click the Search button. Check the IP address you set. • (Note) When using the error/alert e-mail notification f ...
-
Mitsubishi Electronics XD3200U - page 8
EN-8 1 Start the Projector -Control Device Installer . Select [Start] - [All Programs] - [Pr ojector] - • [Projector -Control Device Installer] (in the case of Windows ® XP). 2 Press the + buttons on the left pane to expand the tree structur e until the IP address you set appears. 3 Click the T elnet Configuration tab. 4 Select the Connect t ...
-
Mitsubishi Electronics XD3200U - page 9
EN-9 1 Enter “0” and press the Enter key . 2 Input the old (current) passwor d and press the Enter key . (Default password is admin.) If you input a wrong passwor d, an error message • appears and the setting menu is displayed again. In this case, set the password again. If you for get your password, select “7 • factory defaults,” ...
-
Mitsubishi Electronics XD3200U - page 10
EN-10 1 Enter “3” and press the Enter key . 2 T o enable the e-mail notification function of ProjectorView , enter “1” and press the Enter key . (Default is OFF (0).) (See pages 12 - 15 for ProjectorView function.) Setting the LAN control (LAN-Contr olled Mode) Preparation/SetUp (continued) 1 Enter “1” and press the Enter key . 2 Enter ...
-
Mitsubishi Electronics XD3200U - page 11
EN-11 1 Enter “9” and press the Enter key . 2 The setting screen is shaded and the setting is updated. It takes about 10 seconds for the setting to be • updated. Don’t perform communication during this period. Save and exit Because the password, display language, LAN contr ol, and PJLink™ certification are set using the telnet • ...
-
Mitsubishi Electronics XD3200U - page 12
EN-12 1 Start the Projector -Control Device Installer . Select [Start] - [All Programs] - [Pr ojector] - • [Projector -Control Device Installer] (in the case of Windows ® XP). 2 Expand the tree structur e on the left pane until the IP address you set appears. 3 Select the WEB Configuration tab. 4 Click the External Browser button or Go butto ...
-
Mitsubishi Electronics XD3200U - page 13
EN-13 5 The password input scr een appears. Enter the password you set. The default password is admin. • (Note) If you input a wrong passwor d 4 successive times, the W eb browser is closed. In this case, r epeat from step 1. 6 The ProjectorView main scr een appears. Click anywhere on the scr een. The screen may not show the latest information ...
-
Mitsubishi Electronics XD3200U - page 14
EN-14 ProjectorView (continued) VIRTUAL REMOTE contr oller Put a checkmark in the box of the Virtual remote enabled on the Pr ojectorView main screen, and click the VIRTUAL REMOTE button. The following Virtual Remote window appears. For the functional descriptions of each button, see the user manual of the projector . E-mail notification function ...
-
Mitsubishi Electronics XD3200U - page 15
EN-15 Initial setting T o load information on the pr ojector such as model name and lamp operating time, set the projector data in advance. Click the SETUP button on the ProjectorView main scr een. The Projector Setup screen appears. Enter data according to the description of each setting item. (Note) • Y ou can’ t change the Projector model ...
-
Mitsubishi Electronics XD3200U - page 16
EN-16 Support for the PJLink™ function This projector supports standar d protocol PJLink™ for projector contr ol and you can control and monitor projector’ s operations using the same application among projectors of dif ferent models and dif ferent manufacturers. T o use this function, set the PJLink™ certification pr operly according to t ...
-
Mitsubishi Electronics XD3200U - page 17
EN-17 [Notes on Instant Shut Down] Instant shutdown of the projector during contr ol using the network function may cause ProjectorView to fail to display data correctly . The operating time and temperature may not be displayed corr ectly . In this case, close the browser , r ecognize • this projector using Pr ojector -Control Device Installer ...
¿Tienes una pregunta acerca de Mitsubishi Electronics XD3200U?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Mitsubishi Electronics XD3200U, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Mitsubishi Electronics XD3200U probablemente compartirá una forma de solucionarlo.