-
Ryobi bc30 - page 1
OE OPERATOR'S MANUAL 30cc String Trimmers and Brushcutters ss30 RY30542/RY30943 BC30 RY30562/RY30963 Your new trimmer has been engineered and manufactured to our high standard for dependability, ease of operation, operator safety. Properly cared for, it will give you years of rugged, trouble-free performance. A WnnrulruG: To reduce the risk of ...
-
Ryobi bc30 - page 2
I I I I I I I I I I I General Safety Rules " ' Specific SafetY Rules " ' Symbols Features Assembly 14-18 Operation......... 23-25 A wmuruc, Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. READ ALL INSTRUCTIONS I For safe oper ...
-
Ryobi bc30 - page 3
SPECIFIC SAFETY RULES FOR TRIMMER USE r Replace string head if cracked, chipped, or damaged in any way. Be sure the string head or blade is properly installed and securelyfastened' Failureto do so can cause serious injury. r lilake sure all guards, straps, deflectors, and handles are properly and securelY attached. I Use only the manufacturer ...
-
Ryobi bc30 - page 4
The foltowing signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING A DANGER: il*:fi'"::Jffiiill[.n*"'0"'s situation', which' if not avoided', wirr resurt A wARNTNG: lli::fi'"?#fil#rf*t"'situation' which' ir ...
-
Ryobi bc30 - page 5
STARTER GRIP AND ROPE REAR HANDLE TRIGGER L()CK PRIMER BULB DRIVE SHAFT HOUSING THR()TTLE TRIGGER STRI],IG HEAD FRONT HANDLE STRAIGHT SHAFT GRASS DEFLECTOR Fig. 1b STARTER GRIP AND ROPE PRIMER BULB CtlUPLER THROTTLE TRIGGER DRIVE SHAFT HOUSING SHOULDER HARNESS BRUSHCUTTER GUARD Fig. 1c 8 KNOW YOUR STRING TRIMMER See Figures 1a - 1c. The safe use of ...
-
Ryobi bc30 - page 6
INSTALLING THE POWER HEAD TO THE ATTACHMENT See Figure 2. A wRnulruc' Never install, remove, or adjust any attachment while power head is running. Failure to stop the engine can cause serious personal injury. The attachment connects to the power head bv means of a coupler device. r Loosen the knob on the coupler of the power head shaft and rem ...
-
Ryobi bc30 - page 7
fl rl :1 i ,t T: ri ATTACHING THE SHOULDER HARNESS - BC30 See Figure 9. I Connect the latch on the shoulder harness to the strap hanger. r Adjust the strap to a comfortable position. CONVERTING FROM BRUSHCUTTER TO STRING TRIMMER - BC3O To convert from the brushcutter to the string trimmer, remove the blade and brushcutter guard, attach the straight ...
-
Ryobi bc30 - page 8
REMOVING THE STRAIGHT SHAFT GRASS DEFLECTOR AND STRING HEAD See Figures 10 - 13. I Align the slot in the flanged washer with the slot in the gear neao. r Place the gear head locking tool through the slot in the flanged washer and gear head. I Remove the string head assembly by turning clockwise, I Remove the flanged washer and retain it for the bla ...
-
Ryobi bc30 - page 9
A wnnrulruc' Always hold the string trimmer away from the body keep- ing clearance between the body and the product. Any contact with the housing or string trimmer cutting head can result in burns and/or other serious personal injury. TO ADVANCE THE CUTTING LINE String advance is controlled by tapping the string head on grass while running eng ...
-
Ryobi bc30 - page 10
STARTING AND STOPPING See Figures 21 - 23. TO START A COLD ENGINE: DO NOT squeeze the throttle trigger until the engine starts ano runs. r Lay the trimmer on a flat, bare surface. r PRIME - Press the primer bulb 7 times. r SET the start lever to the START posiiion. I PULL the rope until the engine starts. r Wait 6-1 0 seconds, then squeeze the trig ...
-
Ryobi bc30 - page 11
STRING REPLACEMENT See Figures 26 - 28' r Stop the engine and disconnect the spark plug wire. Hold the string head and turn the spool retainer clockwise to remove. I Remove the spool from the string head. NOTE: Keep the spring attached to the spool. Remove any old string remaining on the spool. I Cut one piece of trimmer line 18 ft. long. r Fi ...
-
Ryobi bc30 - page 12
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER. IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER' PROBLEM POSSIBLE CAUSE SOLUTION PROBLEM Engine will not start Engine does not reach full speed and emits excesslve SMOKE Engine starts, runs, and ac- celerates but will not idle ...
-
Ryobi bc30 - page 13
THE FOLLOWING CALIFORNIA AIR RESOURCES BOARD (CARB) STATEMENT ONLY APPLIES TO MODEL NUMBERS REQUIRED TO MEET THE CARB REQUIREMENTS, LIMITED WARRANW STATEMENT Techtronic Industries North America, Inc., warrants to the original retail purchaser that this RYOBIo brand outdoor product is free from defect in material and workmanship and agrees to repair ...
-
Ryobi bc30 - page 14
The engine exhaust from this product contains chemicals known to the state of california to "uu"" i"n""t, birth defects or other reproductive harm' r,11 o D D OPERATOR'S MANUAL 30cc String Trimmers and Brushcutters cs3o - RY30522/RY30923 ss3o - RY3o542/RY30943 BCSo - RY30562/RY30963 il'r o -'l MANUE ...
¿Tienes una pregunta acerca de Ryobi bc30?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Ryobi bc30, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Ryobi bc30 probablemente compartirá una forma de solucionarlo.