-
Hitachi Koki USA C12FCH - page 1
Compound Miter Saw Model C12LCH • C12LC • C12FCH Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as an important reference when using this power tool. 00Cover_F_C12LCH_Eng ...
-
Hitachi Koki USA C12FCH - page 2
2 GENERAL OPERA TIONAL PRECAUTIONS W ARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury , including the following. Read all these instructions before operating this product and save these instructions. For safe operations: 1. Keep work area clean. Clut ...
-
Hitachi Koki USA C12FCH - page 3
3 Gloves for handling saw blades (saw blades shall be carried in a holder wherever practicable) and rough material. 15. The operator is adequately trained in the use, adjustment and operation of the machine. 16. Refrain from removing any cut-offs or other parts of the workpiece from the cutting area whilst the machine is running and the saw head is ...
-
Hitachi Koki USA C12FCH - page 4
4 ST ANDARD ACCESSORIES (1) 305 mm TCT Saw blade (mounted on tool) ............. 1 (2) Dust bag ...................................................................... 1 (3) 17 mm Box wrench .................................................... 1 (4) Vise Assembly ............................................................ 1 (5) 4 mm Hex.bar wrench ...
-
Hitachi Koki USA C12FCH - page 5
5 Fig. 2 (2) During bevel and compound cutting, attach the dust bag at a right angle to the base surface as shown in Fig. 3 . Fig. 3 CAUTION 䡬 Empty the dust bag frequently to prevent the duct and the lower guard from becoming clogged. Sawdust will accumulate more quickly than normal during bevel cutting. 6. Installation Ensure that the machine i ...
-
Hitachi Koki USA C12FCH - page 6
6 Fig. 7 (2) The screw holder can be raised or lowered according to the height of the workpiece by loosening the 6 mm wing bolt (B). After the adjustment, firmly tighten the 6 mm wing bolt (B) and fix the screw holder . (3) T urn the upper knob and securely fix the workpiece in position. W ARNING 䡬 Always firmly clamp or vise to secure the workpi ...
-
Hitachi Koki USA C12FCH - page 7
7 CAUTION Never lift the lower guard while the saw blade is rotating. The sub fence will not only make contact and adversely affect cutting accuracy , this could also result in damage to the guard. 7. Position adjustment of laser line (Only Model C12LCH/ C12FCH) Ink lining can be easily made on this tool to the laser marker . A switch lights up the ...
-
Hitachi Koki USA C12FCH - page 8
8 NOTE 䡬 Perform cutting by overlapping the ink line with the laser line. 䡬 When the ink line and the laser line are overlapped, the strength and weakness of light will change, resulting in a stable cutting operation because you can easily discern the conformity of lines. This ensures the minimum cutting errors. 䡬 In outdoor or near -the-wind ...
-
Hitachi Koki USA C12FCH - page 9
9 Marking (pre-marked) Marking (pre-marked) 䡬 Do not use the main unit near equipment that generates electrical noise such as generators. Electrical noise might cause faulty readings or operation on the digital display . 9. Cutting operation (1) As shown in Fig. 17 the width of the saw blade is the width of the cut. Therefore, slide the workpiece ...
-
Hitachi Koki USA C12FCH - page 10
10 Starting from halfway , without pulling back, causes the safety cover to be caught in the cutting groove of the workpiece and to contact the saw blade. 12. Bevel angle fine adjustment Fig. 20 Fig. 21 (1) Grip the handle on the motor head and position it at the bevel angle you need. T emporarily tighten the clamp lever . CAUTION 䡬 If not tighte ...
-
Hitachi Koki USA C12FCH - page 11
11 16. Confirmation for use Crown molding vise, Crown molding Stopper (L) and (R) (Optional accessory) (1) Crown molding Stopper (L) and (R) (optional accessories) allow easier cuts of crown molding without tilting the saw blade. lnstall them in the base both-sides side to be shown in Fig. 24. After inserting tighten the 6 mm knob bolts to secure t ...
-
Hitachi Koki USA C12FCH - page 12
12 Fig. 27 Fig. 28 Fig. 29 CAUTION 䡬 Confirm that the spindle lock has returned to the retract position after installing or removing the saw blade. 䡬 T ighten the bolt so it does not come loose during operation. 䡬 Confirm that the bolt has been properly tightened before the power tool is started. 2. Dismounting the saw blade Dismount the saw ...
-
Hitachi Koki USA C12FCH - page 13
13 5. About Handling the Motor (see Fig. 2) Winding of the motor is said to be the heart of this tool. Exercise utmost caution not to damage the winding by exposing it to wash oil or water . NOTE 䡬 Accumulation of dust and the like inside the motor can result in a malfunction. After using the motor for 50 hours or so, carry out no- load running, ...
-
Hitachi Koki USA C12FCH - page 14
14 AB C D 1 323-141 1 2 323-137 1 3 323-138 1 4 949-900 1 D3 × 14 5 323-142 2 6 962-782 1 M5 × 6 7 949-531 1 D2 × 12 8 323-144 1 M5 9 975-144 1 10 323-139 1 "11" 11 – – – – – – – – – – – – – – – – – 1 12 323-647 1 13 323-143 2 14 323-140 1 15 323-136 1 16 323-208 1 M6 × 20 17 322-935 1 18 323-665 1 M1 ...
-
Hitachi Koki USA C12FCH - page 15
15 AB C D 101 323-658 1 380MM 102 993-539 1 M4 × 16 103 973-313 1 104 304-043 1 M4 × 10 105 993-539 1 M4 × 16 106 323-650 1 107 323-624 1 108 323-142 2 109 323-619 1 110 323-622 1 111 949-432 1 M6 112 949-241 1 M5 × 20 113 975-144 1 114 323-621 1 115 993-539 1 M4 × 16 116 323-617 1 117 323-620 1 160MM 118 975-348 1 M8 119 318-929 1 120 304-043 ...
-
Hitachi Koki USA C12FCH - page 16
16 AB C D 191 988-101 1 M10 192 323-652 1 193 323-522 1 305MM-D25.4-NT32 194 323-651 1 195 323-208 2 M6 × 20 196 323-639 1 "197,198,200-202" 197 323-641 1 198 320-3VV 1 6203VVCMPS2L 200 304-043 2 M4 × 10 201 323-640 1 202 608-VVM 1 608VVC2PS2L 203 323-208 2 M6 × 20 204 322-924 1 205 980-523 1 206 935-196 1 M4 × 12 207 949-755 1 M6 × ...
-
Hitachi Koki USA C12FCH - page 17
17 AB C D 16 323-208 1 M6 × 20 17 322-935 1 18 323-665 1 M10 19 323-666 1 20 323-597 1 21 304-043 1 M4 × 10 22 323-598 1 23 323-599 1 24 949-821 1 M5 × 16 25 949-454 1 26 323-596 1 27 322-933 1 28 322-934 1 M16 29 323-593 1 30 323-663 1 31 993-539 1 M4 × 16 32 980-523 1 33 323-600 1 34 949-241 1 M5 × 20 35 949-432 1 M6 36 323-142 2 37 323-619 ...
-
Hitachi Koki USA C12FCH - page 18
18 AB C D 101 323-658 1 380MM 102 993-539 1 M4 × 16 103 973-313 1 104 304-043 1 M4 × 10 105 993-539 1 M4 × 16 106 323-650 1 107 323-624 1 108 323-142 2 109 323-619 1 110 323-622 1 111 949-432 1 M6 112 949-241 1 M5 × 20 113 975-144 1 114 323-621 1 115 993-539 1 M4 × 16 116 323-617 1 117 323-620 1 160MM 118 975-348 1 M8 119 318-929 1 120 304-043 ...
-
Hitachi Koki USA C12FCH - page 19
19 AB C D 191 988-101 1 M10 192 323-652 1 193 323-522 1 305MM-D25.4-NT32 194 323-651 1 195 323-208 2 M6 × 20 196 323-639 1 "197,198,200-202" 197 323-641 1 198 320-3VV 1 6203VVCMPS2L 200 304-043 2 M4 × 10 201 323-640 1 202 608-VVM 1 608VVC2PS2L 203 323-208 2 M6 × 20 204 322-924 1 205 980-523 1 206 938-196 1 M4 × 12 207 949-755 1 M6 × ...
-
Hitachi Koki USA C12FCH - page 20
20 AB C D 1 323-141 1 2 323-137 1 3 323-138 1 4 949-900 1 D3 × 14 5 323-142 2 6 962-782 1 M5 × 6 7 949-531 1 D2 × 12 8 323-144 1 M5 9 975-144 1 10 323-139 1 "11" 11 – – – – – – – – – – – – – – – – – 1 12 323-647 1 13 323-143 2 14 323-140 1 15 323-136 1 16 323-208 1 M6 × 20 17 322-935 1 18 323-665 1 M1 ...
-
Hitachi Koki USA C12FCH - page 21
21 AB C D 104 949-216 1 M4 × 10 105 954-878 1 M4 × 16 106 323-650 1 107 323-624 1 118 975-348 1 M8 119 318-929 1 120 304-043 1 M4 × 10 121 318-927 1 122 323-648 1 123 323-649 1 124 990-541 4 M5 × 16 126 993-539 4 M4 × 16 132 323-693 1 135 323-677 1 "136-142" 136 323-678 1 137 301-806 1 M6 × 15 138 – – – – – – – – – ...
-
Hitachi Koki USA C12FCH - page 22
22 AB C D 191 988-101 1 M10 192 323-652 1 193 323-522 1 305MM-D25.4-NT32 194 323-651 1 195 323-208 2 M6 × 20 196 323-639 1 "197,198,200-202" 197 323-641 1 198 620-3VV 1 6203VVCMPS2L 200 304-043 2 M4 × 10 201 323-640 1 202 608-VVM 1 608VVC2PS2L 203 323-208 2 M6 × 20 204 322-924 1 205 980-523 1 206 935-196 1 M4 × 12 207 949-755 1 M6 × ...
-
Hitachi Koki USA C12FCH - page 23
23 02Back_C12LCH_Eng 4/11/07, 6:56 PM 23 ...
-
Hitachi Koki USA C12FCH - page 24
704 Code No. C99164511 Printed in China Hitachi Koki Co., Ltd. 03Cover_B_C12LCH_Eng 4/11/07, 6:57 PM 20 ...
¿Tienes una pregunta acerca de Hitachi Koki USA C12FCH?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Hitachi Koki USA C12FCH, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Hitachi Koki USA C12FCH probablemente compartirá una forma de solucionarlo.