-
JVC AV-24WT2EK - page 1
INSTRUCTIONS VICTOR COMPANY OF JAPAN, LIMITED CQ40350-001-E 0497-Ki-AB-JMUK A V-24WT2EK/A V -28WT2EK 1997 VICT OR COMP ANY OF JAP AN, LIMITED COLOUR TELEVISION CONTENTS A V -24W T2EK A V -28W T2EK SAFETY PRECAUTIONS ......... 2 Locations of remote control buttons ............................... 4 Locations of TV buttons and parts .............. ...
-
JVC AV-24WT2EK - page 2
2 Thank you for purchasing this JVC colour television. T o ensure your complete understanding, please read this manual thoroughly before operation. SAFETY PRECAUTIONS W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE. CAUTION: TO ENSURE PERSONAL SAFETY , OBSER VE THE FOLLOWING RULES REGARDING THE USE OF TH ...
-
JVC AV-24WT2EK - page 3
3 Some Do’ s And Don’ts On The Safe Use Of Equipment This equipment has been designed and manufactured to meet international safety standards but, like any electrical apparatus, care must be taken if you are to obtain the best results and safety is to be assured. DO read the operating instructions before you attempt to use the equipment. DO ens ...
-
JVC AV-24WT2EK - page 4
4 Locations of remote control buttons 123 456 789 0 P AV TV OK MENU P ZOOM = - 0 1 2 6 7 5 8 3 4 9 ~ P TV OK MENU P VCR TEXT HOLD SUBPAGE MODE REVEAL SIZE STORE CANCEL INDEX ! @ Inserting batteries into your remote control Use two AAA/R03 dry cell batteries. Insert two batteries, observing the and polarities, inserting the end first. 1 Mute button ...
-
JVC AV-24WT2EK - page 5
5 Locations of TV buttons and parts FRONT P ANEL 1 Remote control sensor 2 ECO sensor 3 Headphone jack (mini jack) p.7 4 EXT-3 terminals p.6, 19 5 Volume button p.10 (Press this button to display the volume level indicator . Press the 6 Up/down buttons to change volume while the volume level indicator is displayed.) 6 Up/down buttons p.10 (Y ou can ...
-
JVC AV-24WT2EK - page 6
6 Conditions: • This TV set has external device connectors, EXT -1 to EXT -3 to which you can connect a VCR. However , there are some differences in functions among them. Consult the following table before making connections. • Use headphones with a stereo mini jack (dia. 3.5 mm). When using headphones, the speakers will not output sound. • F ...
-
JVC AV-24WT2EK - page 7
7 3. Connecting the power cord Insert the power plug into an AC outlet (AC 220 – 240 V , 50 Hz). Devices which can be connected to the terminals on the rear panel Devices which can be connected to the terminals on the front panel EXT- 2 S EXT- 1 S 1 VCR 2 S-VHS VCR 3 Decoder 4 TV game or 1 2 1 2 3 4 L R EXT-3 Camcorder Headphones To video o ...
-
JVC AV-24WT2EK - page 8
8 4. T urning the power and TV on 1. Press the Main power button on the TV to turn the power on. The Power lamp lights red (power on), then green (TV on). If the power lamp stays red and does not change to green: Y our TV is in the standby mode. Press the Standby button on the remote control to turn your TV on. Note: • Y ou can also press the PR ...
-
JVC AV-24WT2EK - page 9
9 4. Press OK button. Broadcast stations are automatically allocated to the PR channels. The EDIT menu is displayed after the allocation is completed. • If you want to edit PR channels or allocate a station to PR0 (A V) channel, see page 21 “EDIT/MANUAL” for procedural description. • When carrying out automatic programming, the following br ...
-
JVC AV-24WT2EK - page 10
10 T urning the TV and power off 1. Press the Standby button to turn the TV off. The Power lamp changes from green to red. The TV enters standby mode. 2. Press the Main power button on the TV to turn the main power off. The Power lamp goes off. T o select a channel without using the remote control Y ou can also use the buttons on the front panel of ...
-
JVC AV-24WT2EK - page 11
11 V iewing images from external devices 1. Repeatedly press the 0 button to select the EXT terminal. The current selection appears, and disappears after several seconds. When a station is not registered to the PR 0 (A V) channel, pressing the 0 button changes the selection as follows: When a station is registered to the PR 0 (A V) channel, pressin ...
-
JVC AV-24WT2EK - page 12
12 MUL TI SOUND Y ou can select the multi sound mode for stereo broadcast programmes and bilingual programmes. Note: • The MUL TI SOUND function has no effect on programmes other than A2 or NICAM broadcast programmes. 1. Press OK. The MENU appears. 2. Press / to select SOUND SETTING, then press OK. The SOUND SETTING menu appears. 3. Press / to se ...
-
JVC AV-24WT2EK - page 13
13 COLOUR SYSTEM The colour system is automatically selected, but if the picture is not clear or no colour appears, select the colour system manually . 1. Press OK. The MENU appears. 2. Press / to select PICTURE SETTING, then press OK. The PICTURE SETTING menu appears. 3. Press / to select COLOUR SYSTEM. 4. Press / to select the appropriate colour ...
-
JVC AV-24WT2EK - page 14
14 OTHER FEA TURES INFORMA TION Y ou can display the PR LIST or the current time. 1. Press (Information) repeatedly . The display changes cyclically in the following order . About PR LIST : • T en positions including the currently selected PR channel will be displayed as a list. Press / / / to select the desired PR channel. For details see page 9 ...
-
JVC AV-24WT2EK - page 15
15 7. Press OK. This completes the setting. Notes: • Y ou cannot select a locked PR channel using the PR channel / buttons. • Even if you can select a locked channel and display it, you can not view the programme of the locked channel. T o view a locked PR channel 1. Select a locked PR channel. • Use the number buttons to select the PR channe ...
-
JVC AV-24WT2EK - page 16
16 , : Default position , : The picture is moved from default position. Note: • If you change the ZOOM mode, the picture returns to its default position. Automatic ZOOM selection (AUTO mode) Y ou can set your TV to automatically select the optimum ZOOM mode to suit the picture format. 1. Press ZOOM repeatedly to select AUTO. Y our TV automaticall ...
-
JVC AV-24WT2EK - page 17
17 2. Press (TV/text). 3. Select a page number . Browse: Press the PR channel / button on the remote control. Direct selection: Press the number buttons to enter a three-digit page number . Colour button selection: Press a colour button to select the corresponding page number on the bottom line of the screen. Notes: • Category names of teletext p ...
-
JVC AV-24WT2EK - page 18
18 LIST MODE If you store the numbers of teletext pages you view often, you can quickly call up a desired teletext page whenever you like. Note: • Y ou can store up to 64 pages in memory . Y ou can store four pages in each channel from 1 to 15 (60 pages), and four pages that are the same for all channels above channel 15 (4 pages). T o store the ...
-
JVC AV-24WT2EK - page 19
19 T o give an EXT ID to an EXT input terminal 1. Press OK. The MENU appears. 2. Press / to select EXT SOURCE, then press OK. The EXT SOURCE menu appears. 3. Press / to select EXT SETTING, then press OK. The EXT SETTING menu appears. 4. Press / to select an EXT input terminal. 5. Press blue button. 6. Repeatedly press / to select a character . 7. P ...
-
JVC AV-24WT2EK - page 20
20 LANGUAGE Y ou can select one of ten languages for the on-screen display . 1. Press OK. The MENU appears. 2. Press / to select INST ALL, then press OK. The INST ALL menu appears. 3. Press / to select LANGUAGE, then press OK. The LANGUAGE menu appears. 4. Press / to select a language. 5. Press OK. This completes the setting. OTHER PREP ARA TION No ...
-
JVC AV-24WT2EK - page 21
21 T o delete a station from a PR channel 1. Press / to select the station you want to delete. 2. Press yellow button. Note: • Stations allocated to PR channels following the deleted PR channel number are shifted back by one to the preceding PR channel number . T o change the PR channel number of a station 1. Press / to select the station. 2. Pre ...
-
JVC AV-24WT2EK - page 22
22 6. Press OK. Returns to the EDIT menu. Programming a station’s ID manually: Follow the operations below in place of steps 3 thru 5. (1) Press the / button repeatedly to select a character . (2) Press the button to move cursor to input position. • Pressing the button moves the cursor backward. (3) T o complete station ID, follow steps (1) and ...
-
JVC AV-24WT2EK - page 23
23 T o manually allocate a station to PR channel (Manual allocation) 1. Press blue button. Y our TV enters the Manual allocation mode. 2. Press / to select a PR channel number . Note: • PR channel number “A V” appears on the screen as PR 0 channel. We recommend that you allocate this PR channel to a VCR connected to the aerial socket. 3. Pres ...
-
JVC AV-24WT2EK - page 24
24 Action Insert the plug in an AC socket. Press the Main power button (see page 8). Check aerial connections (see page 6). Press the number 0 button to select the correct mode (see page 1 1). Select the correct colour system manually (see page 13). Press the Standby button to turn the power on again (see page 8). Replace the batteries (see page 4) ...
-
JVC AV-24WT2EK - page 25
25 Channel table CH -- Channel CH 21 E21 CH 22 E22 CH 23 E23 CH 24 E24 CH 25 E25 CH 26 E26 CH 27 E27 CH 28 E28 CH 29 E29 CH 30 E30 CH 31 E31 CH 32 E32 CH 33 E33 CH -- Channel CH 47 E47 CH 48 E48 CH 49 E49 CH 50 E50 CH 51 E51 CH 52 E52 CH 53 E53 CH 54 E54 CH 55 E55 CH 56 E56 CH 57 E57 CH 58 E58 CH 59 E59 CH -- Channel CH 34 E34 CH 35 E35 CH 36 E36 C ...
-
JVC AV-24WT2EK - page 26
26 Model Item AV-24WT2EK AV-28WT2EK TV RF systems CCIR I Colour systems PAL (NTSC 3.58 / 4.43 MHz only in EXT modes) Channels and frequencies E21-E69 Sound-multiplex systems NICAM system Teletext systems Fastext (United Kingdom system) / WST (standard system) Power requirements AC 220 – 240 V, 50 Hz Power consumption Maximum 136 W, Maximum 140 W, ...
-
JVC AV-24WT2EK - page 27
27 ...
-
JVC AV-24WT2EK - page 28
INSTRUCTIONS VICTOR COMPANY OF JAPAN, LIMITED CQ40350-001-E 0497-Ki-AB-JMUK A V-24WT2EK/A V -28WT2EK 1997 VICT OR COMP ANY OF JAP AN, LIMITED COLOUR TELEVISION CONTENTS A V -24W T2EK A V -28W T2EK SAFETY PRECAUTIONS ......... 2 Locations of remote control buttons ............................... 4 Locations of TV buttons and parts .............. ...
¿Tienes una pregunta acerca de JVC AV-24WT2EK?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con JVC AV-24WT2EK, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con JVC AV-24WT2EK probablemente compartirá una forma de solucionarlo.