-
Anritsu MG3690A - page 1
MG3690A RF/Microwave Signal Generators 0.1 Hz to 65 GHz/110 GHz T echnical Datasheet the ideal signal generator MG 3690 A ...
-
Anritsu MG3690A - page 2
Specifications Model/Option No. Frequency Coverage Output T ype MG3691A 2 to 8.4 GHz K(f) MG3692A 2 to 20 GHz K(f) MG3693A 2 to 30 GHz K(f) MG3694A 2 to 40 GHz K (f) MG3695A 2 to 50 GHz V(f) MG3696A 2 to 65 GHz V(f) Option 4 10 MHz to 2.2 GHz Model No. Dependent Option 5 10 MHz to 2 GHz Model No. Dependent Option 22 0.1 Hz to 10 MHz Model No. Depen ...
-
Anritsu MG3690A - page 3
3 Sweep T riggering Sweep triggering is provided for Analog Fr equency Sweep, Step Frequency Sweep, List Fr equency Sweep, and CW Power Sweep. Auto: T riggers sweep automatically . External: T riggers a sweep on the low to high transition of an external TTL signal. AUX I/O connector , r ear panel. Single: T riggers, aborts, and resets a single swee ...
-
Anritsu MG3690A - page 4
4 Spectral Purity All specifications apply at the lesser of +10 dBm output or maximum specified leveled output power , unless otherwise noted. Spurious Signals RF band harmonics with DDC option Increase your output power without compromising your spectral purity 0.1 Hz to 10 MHz (Option 22) <–30 dBc 10 MHz to ≤ 100 MHz (Option 4) <–40 d ...
-
Anritsu MG3690A - page 5
5 Ty pical MG3690A single sideband phase noise at 10 GHz carrier . Standard and Ultra-Low per formance with Option 3. MG3690A SSB Phase Noise L (f) dBc/Hz 10 GHz 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 10 MHz –40 –50 –60 –70 –80 –90 –100 –110 –120 –130 –140 –150 Standard Performance Ultra-Low Performance (with Option 3) Single-Sid ...
-
Anritsu MG3690A - page 6
6 Leveled Output Power Range Standard Units: Without an Attenuator: Maximum leveled output power to –15 dBm (–20 dBm typical). With an Attenuator: Maximum leveled output power to –120 dBm (MG3691A, MG3692A, MG3693A, MG3694A), to –105 dBm (MG3695A, MG3696A). With an Electronic Attenuator: Maximum leveled output power to –140 dBm. Units wit ...
-
Anritsu MG3690A - page 7
7 T ypical maximum MG3694A available output power ➀ 0 to 25 dB or to minimum rated power , whichever is higher ➁ T ypical T ypical maximum MG3692A available output power Other Output Power Specifications Output Units: Output units selectable as either dBm or mV . Selection of mV assumes 50 Ω l oad. All data entry and display are in the select ...
-
Anritsu MG3690A - page 8
8 Fr equency Generator Multiplication/Division Ratios: Frequency Range Divide Ratio, n <10 MHz (Option 22) modulation not available ≥ 10 to ≤ 15.625 MHz (Option 4) 256 >15.625 to ≤ 31.25 MHz (Option 4) 128 >31.25 to ≤ 62.5 MHz (Option 4) 64 >62.5 to ≤ 125 MHz (Option 4) 32 >125 to ≤ 250 MHz (Option 4) 16 >250 to ≤ 50 ...
-
Anritsu MG3690A - page 9
9 1 2.2 GHz with Option 4, DDC. 2 For 50 and 65 GHz units, overshoot >40 GHz is 20% typical at rated power . 3 Period must be longer than the sum of delay and width by 5 clock cycles minimum. *T ypical ≥ 10 to <31.25 MHz 400 ns* 33%* 40 ns* ±70 mV* (Opt. 4) ≥ 31.25 to <125 MHz 90 ns* 22%* 12 ns* ±130 mV* (Opt. 4) ≥ 125 to <500 M ...
-
Anritsu MG3690A - page 10
10 TRACE A: Ch1 8PSK Meas Time 1.5 -1.5 -1.9607643757 1.96078437567 I - Q 300 M /div MG3681A MG3690A Carrier Frequency = 38.000 GHz IF RF User -Defined Modulation W aveform Software (Option 10) An external software package provides the ability to download user -defined waveforms into the internal LF Generator’ s (Option 23) memory . The MG3690A p ...
-
Anritsu MG3690A - page 11
11 Millimeter W ave Multipliers (54000 Series plus Option 18) External multipliers can be added to the MG3690A to provide coverage as high as 110 GHz. Please call us for solutions beyond 110 GHz. The 54000 series multipliers provide 50 to 75 GHz coverage in WR15 or 75 to 110 GHz in WR10. An MG3690A with Option 18, mmW bias, is requir ed to drive th ...
-
Anritsu MG3690A - page 12
12 Inputs and Outputs * Options (7 & 18), (7 & 20), (8 & 9) are mutually exclusive, as they share the same rear panel space. ** Connectors may be available but not active, if option is not ordered. EXT ALC IN BNC Rear Panel RF OUTPUT * (Option 9) K Connector (female) fmax ≤ 40 GHz Standard-Front Panel V Connector (female) fmax ≥ 40 ...
-
Anritsu MG3690A - page 13
AUX I/O (Auxiliary Input/Output) Provides for most of the r ear panel BNC connections through a single, 25-pin, D type connector . Supports master-slave operation with another synthesizer or allows for a single- cable interface with the Model 56100A Scalar Network Analyzer and other Anritsu instruments. (see figure below) SERIAL I/O (Serial Input/O ...
-
Anritsu MG3690A - page 14
14 Ordering Information Models MG3691A 2 – 8.4 GHz Signal Generator MG3692A 2 – 20 GHz Signal Generator MG3693A 2 – 30 GHz Signal Generator MG3694A 2 – 40 GHz Signal Generator MG3695A 2 – 50 GHz Signal Generator MG3696A 2 – 65 GHz Signal Generator Options and Accessories MG3690A/1A Rack Mount with slides – Rack mount kit containing a ...
-
Anritsu MG3690A - page 15
15 Millimeter W ave Accessories (Requires MG3690A Option 18) Accessories Upgrades Economical upgrades are available to upgrade any model to any higher performing model. Consult Anritsu for details. 54000-4WR15 50 to 75 GHz, V Band X4 Multiplier -Source Module (includes A36599 power cable and 3 filters). 54000-5WR15 50 to 75 GHz, V Band X4 Multiplie ...
-
Anritsu MG3690A - page 16
16 Europe 44 (0) 1582-433433 Japan 81 (46) 223-1111 Asia-Pacific (65) 6282-2400 SALES CENTERS: United States (800) ANRITSU Canada (800) ANRITSU South America 55 (21) 2527-6922 Microwave Measurement Division 490 Jarvis Drive, Morgan Hill, CA 95037-2809 http://www .us.anritsu.com Discov er What’ s P ossible ® ©Anritsu, October 2004. All trademark ...
¿Tienes una pregunta acerca de Anritsu MG3690A?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Anritsu MG3690A, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Anritsu MG3690A probablemente compartirá una forma de solucionarlo.