-
Digitus DN-15022 - page 1
POWERLINE HIGH SPEED NETWORK BRIDGE User Manual ...
-
Digitus DN-15022 - page 2
i Contents 1 Introduction ........... .......................................... .................................. ................. 1 1.1 System Requirements ......................... ................................. ................. 1 1.2 Packing List ................................................. .................................. ........ ...
-
Digitus DN-15022 - page 3
1 1 Introduction The Powerline Adapter (also cal led “the device” he reinafter) is a low po wer consumption PL C device developed based on the master chip of I NT6400. It can transmit the net work data in the power line. The device i s compatible with the latest requirements of the EUP Directive. When the de vice enters the lower po wer consump ...
-
Digitus DN-15022 - page 4
2 2 Saf e ty Pr ecautions This device is used for to connect to the AC po wer line. Before us ing the device, rea d the instructions carefully, in ord er to use the device correctly a nd safely. For the installation instructions, re fer to the installation sec tion of this guide. Follow all the warnings and i nstructions ma rked on the product. ...
-
Digitus DN-15022 - page 5
3 3 Adapt er 3.1 Ethernet Interface Use one end of a network cable to connect the Ethern et interface. Use the oth er end of the cable to con nect the Ethernet inte rface of the compute r or another Ethernet-enable d network de vice. 3.2 Buttons Figur e 1 Side panel of the dev ice Reset: Restore the factory def aults. Security: Join a secur ed netw ...
-
Digitus DN-15022 - page 6
4 3.3 LEDs There are 3 LE Ds on the front p anel to i ndicate the status of the a dapter. Figu re 2 To p view The following ta ble describes the LEDs o n the device. LED Color Behavior Description Power Green On Power is on Green Blink System enters the powe r save mode. System is resetting. System is in t he proce ss of security setup. ...
-
Digitus DN-15022 - page 7
5 LED Color Behavior Description but not communi cating with the m. Green Blink The device i s receiving or transmitting data via the E thernet inter face. - Off The device is not connecting to other devices via the Ethernet inter face. Data Green/Red On The device has connec ted to the power line networ k. The Data LED color wil l vary according t ...
-
Digitus DN-15022 - page 8
6 4 Utility Insta llation Note: Before installing the PLC utility sof t ware, make sure that there is no any other power line utility installed on your computer . If there is another u tility installed, please uninstall it and restart your computer. Follow the steps below to install the utilit y. No password or CD-Key i s needed. Step1 Please inser ...
-
Digitus DN-15022 - page 9
7 Figure 4 Selecting the installation folder Step3 Click Br ow se… to select the installation folder , and then click N ext > to continue. ...
-
Digitus DN-15022 - page 10
8 Figure 5 Completing the installation Step4 Click C lose to complet e the installation. ...
-
Digitus DN-15022 - page 11
9 5 How to Use the Utility 5.1 Main T ab The Main screen provides a list of all power line devices logic ally connected to the computer when the utility is running. The top panel s hows local HomePlug device s connected to the netwo rk interface card (NIC) of the computer. Click Conn ect . The util ity automatical ly sc ans the powe r line periodic ...
-
Digitus DN-15022 - page 12
10 Device Name This column shows the default device name, w hich may be modifi ed. To change the name, click Rename or click the name and ed it it in the list. MAC Address This column shows the MAC addr esses of the remote devices. Password By default, this column is blank. You can clic k Enter Passw ord to change it. The procedure for s etting the ...
-
Digitus DN-15022 - page 13
11 Step3 Click OK to veri fy the passwo rd. The passw ord field accepts the device password in any case formats, with or without das h. A confirmation box appe ars if the password is entered cor rectly. If a device is not found, a messag e appears, pro viding suggestions to so lve the common problem s. This process takes a few seconds. Add This but ...
-
Digitus DN-15022 - page 14
12 Scan This button is used to perform an i mmediate search for Hom ePlug devices conne cted to the Power line network. By default, th e utility automaticall y scans every a few seconds and updates the d isplayed informatio n. 5.2 Privacy T ab In the Privacy s creen, yo u can maintain securi ty for the logical network a nd select the device include ...
-
Digitus DN-15022 - page 15
13 Set Local Device Only This button is used to chan ge the network name and pas sword of th e local device. If a new network p assword is entere d, all the device s appeared in th e Main panel pri or to this are no longer pres ent in the new network, effec tively making the local devi ces not to communicate to the device s which are in the old log ...
-
Digitus DN-15022 - page 16
14 Figure 10 Diagnostics tab The Lower panel displays the his tory of all remote de vices appeared on th e computer over a certa in period of time. All the device s and the parameters of th e devices on the power line netwo rk are listed. Devic es that are active on the curren t logical network show a transfer rate in the rate column. De vices on o ...
-
Digitus DN-15022 - page 17
15 The diagnostic s information displayed ca n be save d to a text file for later use, or be printed for refere nce for a technical support call. Click delete to delete the devices which are no lon ger part of the ne twork. A dial og window pops up w ith a confirma tion message if the u ser wants to delete a devic e whose password has been entered. ...
-
Digitus DN-15022 - page 18
16 6 How to Use the Securi ty Pushbutton This section de scribes how to add new devi ces or remove o ld devices fro m a HomePlug AV logica l network (AVLN) by using a Security (called N MK) pushbutton. Power LED statu s indicates the operation progress and result. 6.1 Forming a HomePlug A V Logical Network When two devic es with different N MK valu ...
-
Digitus DN-15022 - page 19
17 6.2 Joining a Network In this scenario a network exists, a new device, the ‘j oiner’, wants to join the network. Any device on th e existing network can b ecome the ‘adder’. Step1 Press the pushbutton o n the ‘joiner’ for at least 3 seconds. Step2 Press the pushbutto n on any networ k device for less than 3 seconds, making it the ‘ ...
-
Digitus DN-15022 - page 20
18 6.3 Leaving a Network A network exists. T he user wants to remove one device, the ‘lea ver’, from that network. The user wan ts to remove the device from se rvice altogether or have it join another logical netwo rk. Step1 Press the pushbutton on the ‘leaver’ for at least 1 0 seconds. The device resets and restar ts with a random NMK. Ste ...
-
Digitus DN-15022 - page 21
19 Appendix A Specifications Chipset Intellon INT6400 Protocol Compliant with HomeP lug AV 1.1 Co-existing with existing HomePlug 1.0 System Support Windows 7, Vista, XP PLC Rate 200 Mbps Modulation Ba nd 2MHz~30M Hz Modulation Sc hemes Support QAM 1 024/256/64/16/8, QPSK, BPSK and ROBO Encryption 128 AES LED Indicators Power :Power on and off Ethe ...
-
Digitus DN-15022 - page 22
20 Appendix B Acronyms and Abbreviations AVLN AV In-home Logical Network, the AVLAN is the set of STAs that possess the same network Membership key, every A VLN is managed b y a single CCo CCo Central Coordinator, the CCo is a superset of a STA which inc ludes terminal equ ipment identi fiers and global link identifi ers CSMA/CA Carrier Sense Multi ...
-
Digitus DN-15022 - page 23
21 Appendix C About QoS PLC 200AV allows 4 levels of Channel Access Priori ty (CAP (0 – 3)). The 8 levels of VLAN Ethernet t ags must be mapped to the 4 leve ls of CAP priority, where CAP 3 is the highest prior ity and CAP 0 i s the lowest. CAP 3 priority is used for voice and network manage ment frames. CAP 2 is use d for streaming video and mus ...
¿Tienes una pregunta acerca de Digitus DN-15022?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Digitus DN-15022, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Digitus DN-15022 probablemente compartirá una forma de solucionarlo.