-
Dynasty Spas 2006 - page 1
OWNER’S MANUAL ...
-
Dynasty Spas 2006 - page 2
-2- Dealer Company: _______________________________________ Address: ________________________________________ Phone: __________________________________________ E-Mail: __________________________________________ Installer Company: _______________________________________ Address: ________________________________________ Phone: _______________________ ...
-
Dynasty Spas 2006 - page 3
-3- Owner ’s Information ..................2 Safety Instructions .....................5 Basic Introductory Information ...7 Set-Up & Delivery Guidelines ....8 Wiring Diagram ........................10 Pre-Operation Instructions .......1 1 General Controls & V alves ......12 Filter Location ..........................14 Filter Maintenance . ...
-
Dynasty Spas 2006 - page 4
-4- Dear Dynasty Spa Owner: Congratulations on your purchase of a new Dynasty Spa. Y ou now possess the ultimate passport to tranquility - a miniature vacation at home, ready and waiting for you in your own backyard! We want you to enjoy your Dynasty Spa. Many hours of research have gone into the design of your spa, to ensure the ultimate in hydrot ...
-
Dynasty Spas 2006 - page 5
-5- 1) READ AND FOLLOW ALL INSTRUCTIONS. 2) W ARNING: T o reduce the risk of injury , do not permit children to use this product unless they are closely supervised at all times. Keep spa cover locked when not in use. 3) Wiring should be done by a qualified electrician, according to the directions listed under “Set-up And Delivery Guidelines”, a ...
-
Dynasty Spas 2006 - page 6
-6- • Persons suffering from obesity or with a medical history of heart disease, low or high blood pressure, circulatory system problems, or diabetes should consult a physician before using a spa. • Persons using medication should consult a physician before using a spa since some medication may affect heart rate, blood pressure, and circulation ...
-
Dynasty Spas 2006 - page 7
-7- Congratulations on the purchase of your new spa. Our goal is to provide you with a warm and relaxing spa which incorporates a soothing water massage. In order to maximize the pleasure of your spa, you will need to understand how it works. The following operating and maintenance instructions are very important and must be followed carefully . Wi ...
-
Dynasty Spas 2006 - page 8
-8- Getting Ready For Delivery & Set-up Of Y our New Spa Surface And Pad Requirements • Y our new portable spa must be placed on a uniformly firm, flat, and level surface. A concrete pad 4 inches thick is best. • If your spa is located near sprinklers, adjust or cap them so they do not hit the siding of the spa. Balconies And Deck Requireme ...
-
Dynasty Spas 2006 - page 9
-9- Getting Ready For Delivery & Set-up Of Y our New Spa Electrical Requirements • Y our 220 V olt spa pack will require a 50 amp dedicated GFCI, load neutral, circuit breaker . • Extension cords are not to be used in conjunction with operation of the spa. Low voltage damage could result, which is not covered by warranty . • If you have a ...
-
Dynasty Spas 2006 - page 10
- 10 - Factory Recommended G.F .C.I. Load Center W iring Wiring Diagram Note: The white neutral wire from the back of the GFCI MUST be connected to an incoming line neutral. The internal mechanism of the GFCI requires this neutral connection. The GFCI will not work without it. Wiring Requirements • 2-Hots, 1-Neutral, 1-Isolated Ground • (under ...
-
Dynasty Spas 2006 - page 11
- 11 - Priming Pump For Electric Packs The Power pack system is located under the skirting. The equipment can be serviced by simply removing the door . The door is located on the side of the spa where three panels are located, usually on the side of the spa with the lounger , or the side where the topside control panel is located. It is important t ...
-
Dynasty Spas 2006 - page 12
- 12 - Air Controls & Diverter V alve Controls Air Control Each spa is equipped with air controls (venturies). The purpose of these controls is to regulate the mixture of air and water that flows through the jets. If an optional blower is installed, air is also pushed through the air controls (venturies) for maximum output. If your spa has a ma ...
-
Dynasty Spas 2006 - page 13
- 13 - Other General Controls Individual Jet Operation Individual jets can be turned on and off. This is done by simply turning the outer jet housing. T urning clockwise will turn the jet on, and turning counterclockwise will turn the jet off. Individual jet control can be done independently from normal diverter valve settings. Clam Jet Control If ...
-
Dynasty Spas 2006 - page 14
- 14 - Filter Location Single and Dual Filter Location Single Filter Location (Baron Only) ...
-
Dynasty Spas 2006 - page 15
- 15 - Filter Maintenance Filtration starts as soon as water flow is steady through the filter . The filter cartridge removes body oil and debris from the spa water , as they can cause flow resistance. A dirty cartridge will decrease flow and may prevent the spa from heating properly . Therefore, regular filter cleaning is essential. Cleaning and R ...
-
Dynasty Spas 2006 - page 16
- 16 - Keeping Y our Spa W ater Clean & Fresh Cleaning Y our Spa W ater Y ou need to keep your spa clean and ready to use. When you enter your spa, you bring in as much contamination as 50 people would in a normal size swimming pool! Because your spa is such a small, enclosed environment, it needs to be a sanitary place. We accomplish this with ...
-
Dynasty Spas 2006 - page 17
- 17 - Keeping Y our Spa W ater Clean & Fresh Once the spa has been filled to the correct level and pumps are primed and running add: 1) ST AIN & SCALE REMOVER- This prevents staining, rust and corrosion, caused by metals in the source water . One bottle will treat up to 500 gallons for up to 3 months. 2) CALCIUM BOOSTER (If Needed) - Calci ...
-
Dynasty Spas 2006 - page 18
- 18 - Keeping Y our Spa W ater Clean & Fresh (An Overview) Monthly - For Equipment Protection CALCIUM BOOSTER (If Needed) - Calcium booster treats the water if low calcium hardness is a problem in your area. It will help prevent equipment corrosion and foaming by raising the spa's water hardness level to an acceptable range of 120 ppm. Fi ...
-
Dynasty Spas 2006 - page 19
Do not leave your water treatment products outside. If subjected to extreme heat or cold, their effectiveness can be impaired. KEEP ALL CHEMICALS OUT OF THE REACH OF CHILDREN! - 19 - Keeping Y our Spa W ater Clean & Fresh Mineral Protection ST AIN & SCALE REMOVER - This prevents staining, rust and corrosion, caused by metals in the source w ...
-
Dynasty Spas 2006 - page 20
- 20 - Draining Y our Spa Because your spa holds a relatively small amount of water , contaminants such as body oil, perspiration, dirt, hair , etc., may become quite concentrated. For this reason, the water should be drained and replaced every three months depending on use. • T urn off power at the breaker . • Hook up a garden hose to the hose ...
-
Dynasty Spas 2006 - page 21
- 21 - Winterizing Y our Spa In areas of the country where the temperatures drop below 32° F , it is important to follow these directions: When winterizing the spa, we recommend putting RV Antifreeze in the spa and running it before draining the spa. 1) If the spa is not going to be used, drain completely . Be sure all water is removed. Break or l ...
-
Dynasty Spas 2006 - page 22
- 22 - Maintaining Y our Spa Cover Proper Maintenance For Y our Dynasty Spa Cover 1) Use a soft broom to remove accumulation after every snowfall or ice storm. 2) Splash cool tap water on the hardware to free them if they become frozen shut. WD-40™ will keep the lock free, but apply carefully because it can damage the cabinet finish. 3) We recomm ...
-
Dynasty Spas 2006 - page 23
- 23 - T rouble Shooting Guide No heat or heat too low Probable Cause #1 ...............Dirty Filter . Action ....................................Remove filter cartridge and clean. Probable Cause #2 ...............Breaker at house off. Action ....................................Reset breaker at house. Breaker can appear to be on and one pole can be ...
-
Dynasty Spas 2006 - page 24
- 24 - T rouble Shooting Guide (cont.) Probably Cause #4 ...............Individual jet is closed. Action ....................................T urn the outer jet housing clockwise to turn jet on. Low water flow Probable Cause #1 ...............Dirty Filter . Action ....................................Remove filter cartridge and clean. Probable Cause ...
-
Dynasty Spas 2006 - page 25
- 25 - Air Blower ..............................The air blower supplies air to the jets creating a hydro massage action. Air Loop .................................A back up system for the check valve, prevents water from entering air blower . Air Control or V enturi.............Mounted on the lip of the spa or at the equipment shroud, to induce air ...
-
Dynasty Spas 2006 - page 26
- 26 - Glossary of T erms (cont.) Hose Bib................................Used in the draining of the spa, fits a standard garden hose. Jets ........................................The fittings on your spa that direct the flow of water for massaging action. Ozone ....................................A water purification supplement method using Ozone ...
-
Dynasty Spas 2006 - page 27
- 27 - Notes ...
-
Dynasty Spas 2006 - page 28
001095.120805 C Dynasty Spas 101 Dynasty W ay Athens, TN 37303 www .dynastyspas.com ©2006 Dynasty Spas, Inc. All rights reserved. Dynasty Spas reserves the right to make product modifications and enhancements. ...
¿Tienes una pregunta acerca de Dynasty Spas 2006?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Dynasty Spas 2006, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Dynasty Spas 2006 probablemente compartirá una forma de solucionarlo.