-
Zanussi FA 1032 - page 1
W ASHING MACHINE PRALKA AUTOMA TYCZNA AUTOMA TICKÁ PRA C KA AUTOMA T A MOSÓGÉP F A 1032 BLANCOS COLORES RESISTENTES COLORES DELICADOS BLANCOS CON PRELAV. ACLARADOS SUAVIZANTES CENTRIFUGADO SINTETICOS DELICADOS LANA SINTETICOS CON PRELAV. ACLARADOS SUAVIZANTES DESCARGA 30 ° -60 ° 30 ° -40 ° 30 ° -40 ° 30 ° -60 ° B B C A D G 60 ° -90 ° 4 ...
-
Zanussi FA 1032 - page 2
2 Dear customer , Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. T ransport damages When unpacking the appliance, check that it is not damaged. If in doubt, ...
-
Zanussi FA 1032 - page 3
ENGLISH 3 Maintenance 18 Bodywork 18 Detergent dispenser drawer 18 Cleaning of the drainage area 18 Water inlet filter 19 Frost precautions 19 Emergency emptying out 19 Something not w orking? 20-21 W arnings 4-5 Disposal 5 Tips f or en vironmental pr otection 5 T ec hnical specifications 6 Installation 7-8 Unpacking 7 Hydraulic connection 7 Levell ...
-
Zanussi FA 1032 - page 4
4 Installation • All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not removed or are not completely removed. Refer to the relevant paragraph in the instruction book. • Any electrical work required to install this appliance mus ...
-
Zanussi FA 1032 - page 5
ENGLISH 5 Disposal Tips f or en vir onmental pr otection P ac ka ging materials The materials marked with the symbol are recyclable. >PE< =polyethylene >PS< =polystyrene >PP< =polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. Machine Use authorised disposal sites ...
-
Zanussi FA 1032 - page 6
6 DIMENSIONS Height 85 cm Width 60 cm Depth 60 cm MAXIMUM LOAD Cotton 4,5 kg Synthetics 2 kg Delicates 2 kg Woollens 1 kg SPIN SPEED 1000 rpm max. POWER SUPPLY VOLTAGE/FREQUENCY 230 V/50 Hz TOTAL POWER ABSORBED 2100 W MINIMUM FUSE PROTECTION 10 A WATER PRESSURE Minimum 5 N/cm 2 Maximum 80 N/cm 2 This appliance complies with the following EEC Direct ...
-
Zanussi FA 1032 - page 7
ENGLISH 7 Installation T ransit security bars Before starting the machine up, the transport security bars must be removed as follows: You are advised to keep all the transport security bars in case the appliance has to be transported again. 1. Unscrew and remove the three rear screws by means of a key. 2. Lean the appliance back on the rear and fit ...
-
Zanussi FA 1032 - page 8
8 1,5 m. Max. 60 cm. Min. 90 cm. Max. IMPORTANT: The distance from the floor to the highest part of the hose should be between 60 to 90 cm. (It is advised to be between 60 and 70 cm). The hose must not be bent nor twisted to avoid clogging. Should a prolongation of the discharging hose be unavoidable this must never surpass 1.5 m and must be of the ...
-
Zanussi FA 1032 - page 9
ENGLISH 9 This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption. • The temperature selector dial will allow you to choose the most suitable temperature for your laundry. • The balance control device ensures the machine is stable during the spin. 1 Detergent dispenser d ...
-
Zanussi FA 1032 - page 10
10 Use 1. Pr ogramme chart It will help you to choose the most suitable washing programme for your laundry. 2. Spin speed selector This dial has the following positions: • 0 = no spin for cotton • 300 = MIN, for cotton • 1000 = MAX, for cotton. For synthetics, delicates and wool the maximum position corresponds to 750 rpm. The intermediate po ...
-
Zanussi FA 1032 - page 11
ENGLISH 11 W ashing hints Sor ting the laundry Follow the wash code symbols on each garment label and the manufacturer’s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. T emperatures 90° for normally soiled white cottons and linen (e.g. tea cloths, towels, tablecloths, sheets...) 60° for no ...
-
Zanussi FA 1032 - page 12
12 Ink : depending on the type of ink, moisten the fabric first with acetone (*), then with acetic acid; treat any residual marks on white fabrics with bleach and then rinse thoroughly. Tar stains : first treat with stain remover, methylated spirits or benzine, then rub with detergent paste. (*) do not use acetone on artificial silk. Detergents and ...
-
Zanussi FA 1032 - page 13
ENGLISH 13 International wash code symbols These symbols appear on f abric labels, in order to help y ou choose the best wa y to treat your laundr y . Energetic wash Delicate wash Max. wash temperature 95°C Max. wash temperature 60°C Max. wash temperature 40°C Max. wash temperature 30°C Hand wash Do not wash at all Bleaching Bleach in cold wate ...
-
Zanussi FA 1032 - page 14
14 4. Select the temperature Turn the dial to the required setting. 5. Select the option push button/s and the spin speed. 6. Select the programme and start the machine Turn the programme selector dial clockwise to the required programme. Before pulling the On/off programme selector check if: • The door is properly closed. • The appliance is pl ...
-
Zanussi FA 1032 - page 15
ENGLISH 15 7. At the end of the programme The machine stops automatically. The mains on light goes out. If you have selected a programme which ends with the water of the last rinse left in the tub, drain the water before opening the door. Select programme “ P ” (drain) or “ G ” (spin). Wait one or two minutes before opening the door to give ...
-
Zanussi FA 1032 - page 16
16 Pr ogramme table W ashing programmes f or cotton and linen Load: 4,5 kg In compliance with EC directive 92/75, the consumption figures indicated on the energy label refer to the 60°C wash programme for cotton (programme “ B ”) with a wash load of 4.5 kg. ( * ) When this button is pressed, the last rinse water of these programmes is not empt ...
-
Zanussi FA 1032 - page 17
ENGLISH 17 Pr ogramme table ( * ) When this button is pressed, the last rinse water of these programmes is not emptied out, so as to avoid creasing if the laundry is not removed from the machine immediately after washing. To drain the water select programme “ G ” (spin) or “ P ” (drain). W ashing programmes f or synthetics, mixed fabrics, d ...
-
Zanussi FA 1032 - page 18
18 1. Bodyw ork Clean the outside of the machine with warm water and a neutral, non-abrasive household detergent. Rinse with clean water and dry with a soft cloth. Important: do not use methylated spirits, solvents or similar products to clean the bodywork. 2. Detergent dispenser drawer After a while, detergents and fabric softeners leave deposits ...
-
Zanussi FA 1032 - page 19
ENGLISH 19 4. The water inlet hose filter If it takes longer to fill up the washing machine it is time to check the water inlet hose filter it may be clogged. Turn off the water tap. Unscrew the fixing nut of the inlet hose. Remove the filter from the electrovalve and clean it with a hard bristle brush and replace it. Screw on the nut thoroughfully ...
-
Zanussi FA 1032 - page 20
20 Something not w orking? Problems which you can resolve yourself. Pr ob lem P ossible cause • The machine does not start up: • The door is not firmly closed. • The machine is not plugged in or there is no power at the socket. • The main fuse has blown. • The programme selector is not positioned correctly or the programme selector knob h ...
-
Zanussi FA 1032 - page 21
ENGLISH 21 If you are unable to identify or solve the problem, contact our service centre. Before telephoning, make a note of the model, serial number and purchase date of your machine: the Service Centre will require this information. Mod. .......... Prod. No. ........... Ser . No . ......... M o d . .. . .. .. . . . P r o d . N o . . . .. . .. . ...
-
Zanussi FA 1032 - page 22
EHPOESL/Z - 10/2003 ...
¿Tienes una pregunta acerca de Zanussi FA 1032?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Zanussi FA 1032, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Zanussi FA 1032 probablemente compartirá una forma de solucionarlo.