-
Zanussi F1003 W - page 1
W ASHING MACHINE F1003 W INSTRUCTION BOOKLET 35.292.832/0 GB ...
-
Zanussi F1003 W - page 2
2 Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in inst ...
-
Zanussi F1003 W - page 3
3 Contents F or the User Important Safety Infor mation 2 Y our New W ashing Machine 4 Description of the Appliance 5 Detergent dispenser drawer 5 The Control Panel 6 Operating sequence 7-10 W ashing 4.5 kg of white cotton at 90°C 7 Load the laundry 7 Measure out the detergent 7 Measure out the fabric softener 7 Select the required option 7 Select ...
-
Zanussi F1003 W - page 4
4 Y our New W ashing Machine Y our new washing machine meets all modern requirements for effective treatment of laundry with low water , energy and deter gent consumption. ● Automatic cooling of the wash water to 60°C before draining, with the 90°C programme. This reduces thermal shock to fabrics, helping to prevent creasing. ● The special wo ...
-
Zanussi F1003 W - page 5
5 Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 ON/OFF button 4 “Option” buttons 5 “Mains-on” light 6 Programme selector dial 7 Door opening handle 8 Drain pump 9 Adjustable feet Deter gent dispenser dr a w er Prewash Main wash Fabric softener C0069 ...
-
Zanussi F1003 W - page 6
1 Pr ogr amme guide 2 On/Off button By depressing this button the machine starts operating. When depressed again, the machine stops. 3 QUICK W ASH Button By depressing this button on programmes A , B , C , D and H the wash time is reduced. This is suitable only for garments which are lightly soiled. 4 HALF LO AD button Select this button to reduce ...
-
Zanussi F1003 W - page 7
7 Operating Sequence Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine. W ASHING 4.5 KG OF WHITE COTTON A T 90°C Suppose you have 4.5 kg of normally s ...
-
Zanussi F1003 W - page 8
8 6. Star t the machine Before starting up the machine check that: ● the appliance is plugged in ● the water supply taps are turned on ● the drain hose is correctly and securely positioned ● the door and the detergent dispenser drawer are closed. Depress the ON/OFF button: the mains-on light will illuminate and the machine starts operating. ...
-
Zanussi F1003 W - page 9
9 W ASHING 2 KG OF MIXED F ABRICS A T 50°C Suppose you have 2 kg of Mixed fabrics to wash. They are rather delicate fabrics and should not be washed at a high temperature. 1. Load the laundr y Open the door by pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door . ...
-
Zanussi F1003 W - page 10
10 7. At the end of the pr ogr amme After the last rinse, the machine stops with the water left in the wash tub, to prevent the fabric from creasing. T o drain the water, select programme “ K ” (short spin) or “ P ” (drain). The door is controlled by a safety device which releases 2 minutes after the end of the programme. Switch the machine ...
-
Zanussi F1003 W - page 11
11 W ashing Hints Do NOT overload the machine. W eigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g T ablecloth 400-500 g Serviette 50-100 g T ea towel 70-120 g Linen hand towel 100-150 g T owelling hand towel 150-2 ...
-
Zanussi F1003 W - page 12
12 And in which f orm? Not only are there different types of deter gent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser drawer . Do not sprinkle powder onto clothes in the machine drum. TR ...
-
Zanussi F1003 W - page 13
13 W ash Car e Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. W ASHING SYMBOL BLEACHING IRONING DR Y CLEANING TUMBLE DR YING ...
-
Zanussi F1003 W - page 14
14 W ashing Pr ogrammes Degree of soil and type of laundry Description W ash programme/ W ashing symbol Programme dial position Possible options Max Load NON- F AST COLOUREDS F AST COLOUREDS WHITES WHITES + PREW ASH For heavy soiled cotton items. Fast coloured cotton or linen fabrics, shirts, underwear , towels. Non fast coloured cotton or linen fa ...
-
Zanussi F1003 W - page 15
15 W ashing Pr ogrammes Degree of soil and type of laundry Description W ash programme/ W ashing symbol Programme dial position MIXED F ABRICS Possible options SHOR T SPIN WOOL CARE DELICA TES Synthetic or mixed fabrics, underwear , coloured garments, non-shrink shirts, blouses. Specially tested programme for wool garments bearing the “Pure new w ...
-
Zanussi F1003 W - page 16
16 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply . Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening po ...
-
Zanussi F1003 W - page 17
17 • When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby to dry up spillage of water when removing the cover . • Remove any objects from the pump impeller by rotating it. • Put the cap back on the emergency emptying hose and place the latter back in its seat. • Screw the pump cover fully in. • Clos ...
-
Zanussi F1003 W - page 18
18 Something Not W orking Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . Before contacting your local Service Force Centre, please carry out the checks listed below . IMPOR T ANT : if you call out an engineer to a fault listed below , or to repair a fault caused by ...
-
Zanussi F1003 W - page 19
19 Symptom The door will not open Possible causes ● The programme is still running. ● The door lock has not yet released. ● W ater in the tub: the door cannot be opened if water is present in the tub. Spinning starts late or the machine does not spin ● The electronic unbalance detection device has cut in because the laundry is not evenly di ...
-
Zanussi F1003 W - page 20
20 Guarantee Conditions Standar d guar antee conditions W e, Zanussi Electrolux undertake that if, within 12 months of the date of the purchase, this Zanussi Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for ...
-
Zanussi F1003 W - page 21
21 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or co ...
-
Zanussi F1003 W - page 22
22 Unpacking All transit bolts and packing must be removed before using the appliance Y ou are advised to keep all the packaging for re-use in case the appliance has to be transported again. ■ Unscrew and remove the three rear transit bolts (using a spanner). ■ Lay the machine gently on its back, making sure that the hoses are not squashed. W e ...
-
Zanussi F1003 W - page 23
23 W a ter inlet The inlets on the back of the appliance are colour coded, blue for cold and red for hot. Connect the hoses to a tap with a 3/4” thread. Do not use already employed inlet hoses. If only a cold water supply is available, connect the two hoses to a cold water outlet by means of a «Y» connection piece. Installation should comply wi ...
-
Zanussi F1003 W - page 24
24 W a ter dr ainage This appliance is designed to be permanently plumbed into your home's water supply and drainage system. The appliance drain hose should hook into a standpipe, the hook in the drain hose is formed using the plastic “U-Piece” supplied. The standpipe should have an internal diameter of approximately 38mm (see diagram) thu ...
-
Zanussi F1003 W - page 25
25 Le v elling Level the washing machine by loosening or tightening the feet. Once in the right position fix the feet by pushing the nuts against the base of the case. Accurate levelling prevents vibration, noise and displacement of the machine during operation. After levelling the machine, secure the feet by tightening the ring nuts with the aid o ...
-
Zanussi F1003 W - page 26
26 W ARNING: A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Ensure that the cut off plug is disposed of safely . Should the appliance power supply cable neeed to be replaced, this should be carried out by our Service Force Centr e. Note When the appliance is installed the power supply cable must be accessible. P er ...
-
Zanussi F1003 W - page 27
...
-
Zanussi F1003 W - page 28
Electrolux plc 2003/02 From the Electr olux Group. The world’ s No . 1 choice . The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) ar ...
¿Tienes una pregunta acerca de Zanussi F1003 W?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Zanussi F1003 W, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Zanussi F1003 W probablemente compartirá una forma de solucionarlo.