-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 1
Before using the display , read this manual carefully so that you know how to use the display correctly . Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily . * Installation and removal require special expertise. Consult you ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 2
E-2 SAFETY PRECAUTIONS IMPOR T ANT INFORMA TION W ARNING: This is a Class A product. In a domestic en vironment this product may cause radio interference in which case the user may be required to take adequate measures. W ARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PR ODUCT T O RAIN OR MOISTURE. FCC NOTICE • P42VCA10 ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 3
E-3 English 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualif ied service personnel. Servicing is required when the apparatus has been damaged in any wa y , su ch as po wer- supply cord or plug is damaged, liquid has been spilled or objects hav e fallen into the apparatus, t ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 4
E-4 FEA TURES This display uses a plasma display panel and is only 8.5 cm (42”) /9.8 cm (50”) deep. With its high picture quality and perfor mance, it is perfectly suited for multimedia applications. V ariety of input signals • RGB input is compatible with mD-sub terminals and BNC terminals. • The display has an RGB input terminal to recei ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 5
E-5 English ACCESSORIES HANDY TIPS • V iewing the screen constantly for extended periods can strain y our eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet (42”)/ 1.9 m or 6.3 feet (50”)) from the screen and to look occasionally away while w or king. • Have the displa y inspected and c leaned by your dealer at re gular in ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 6
E-6 INST ALLA TION T o prev ent the display’ s internal components from ov erhea ting, make sure that the display is installed in a well-v entilated loc ation. Be sure to use the optional desktop stand, ceiling-mounting unit, wall-mounting unit and other unit when installing this displa y . Also, be sure that your dealer performs the installation ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 7
E-7 PAR T NAMES AND FUNCTIONS Front (both 42" and 50") 1 Power indicator lamp This lamp sho ws the state of the po wer supply . Lit (red): Po wer OFF (stand-by) Lit (green): Po wer ON Lit (orange): Po wer saving (DPMS: Po wer saving function) mode ON Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. Se ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 8
E-8 1 OFF/STD-BY switch OFF : The po w er indicator lamp goes of f, and the power can’ t be turned on by the power b utton. The power is partly supplied . STD-BY :The power indicator lamp lights red, and the po wer can be turned on or off by the po wer button. 2 RS-232C terminal (RS-232C) This terminal is provided for you to control the displa y ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 9
E-9 4 Power input terminal Connect this terminal to the power cab le supplied with the display . When connecting a cable,attach a ferrite core to the cable. (See P . E-13) 5 External speaker output terminal (EXT SP) Connect this terminal to the optionally av ailable speaker . (When using other speaker than the optional one, use 4–16 Ω speak er. ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 10
E-10 Description of Input T erminals Pin No. Input signal Pin No. Input signal 1 Red 9 — 2 Green 10 Ground 3 Blue 11 — 4— 1 2 — 5 Ground 13 Horizontal synchronization 6 Ground 14 V ertical synchronization 7 Ground 15 — 8 Ground Frame Ground RGB1 terminal (RGB1 INPUT/mD-sub) Pin No. Signal 1 DCD (Data Carrier Detect) 2 RD (Received Data) 3 ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 11
E-11 1 Power ON button [POWER ON] ➝ (See P . E-16.) 2 Power OFF button [POWER OFF] ➝ (See P . E-16.) 3 RGB input mode selector button [RGB] ➝ (See P . E-17.) 4 Video input mode selector button [VIDEO] Unused. 5 Wide screen selector button [WIDE] ➝ (See P . E-18–E-19.) 6 Menu button [MENU] ➝ (See P . E-20–E-34.) Use this button to disp ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 12
E-12 PRECAUTIONS T o prev ent malfunction, be sure not to apply any form of se vere shock to the remote control. T o prev ent malfunction or deformation, be sure not to allo w the remote contr ol to become wet; also, keep it aw ay from hot locat ions or heating equipment. Be sure not to clean the remote control using a cloth dampened in an y volati ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 13
E-13 English Be sure to turn OFF the po wer to the display and external equipment bef ore making any connections. No cables are supplied with the display for connection to external equipment. The type of cab le to be used v aries depending on the PC model. Contact your dealer for more information. RECEPT ACLE Make sure that the po wer cab le’ s g ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 14
E-14 CONNECTING THE DISPLA Y TO EXTERNAL EQUIPMENT (Continued) EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS Remote control Display Speaker (optional) Speaker VCR or other external components See P . PC E-P42VCA10(07-15) 03.1.14, 10:29 AM Page 14 Adobe PageMaker 6.5J/PPC ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 15
E-15 English PC • As the cable for connecting a PC diff ers with the PC model, please consult your dealer for information on the right cable to p urchase. T o RGB output (mD-sub) T o audio output T o audio input T o RGB1 input (mD-sub) Note • Unplug the po wer cord from the A C outlet before you connect external components. • Also refer to th ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 16
E-16 Select the OFF/STD-BY switch at the STD-BY of the display . When you do so, the power indicator lamp turns red. Press on the remote control. When you do so, the power indicator lamp turns green. BASIC OPERA TIONS TURNING ON THE POWER Press when the power is ON. The po wer indica tor lamp turns red. TURNING OFF THE POWER 1 2 Press to increase t ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 17
E-17 SELECTING INPUT MODE RGB INPUT MODE Press to select a desired input mode. Each time you press , a dif ferent input mode appears. The sequence is as follo ws: RGB1:Displays pictures from equipment connected to the RGB1 (mD-sub) terminal. RGB2:Displays pictures from equipment connected to the RGB2 (BNC x 5) terminal. 1 RGB2 mode RGB1 mode Englis ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 18
E-18 WA TCHING PICTURES ON THE WIDE SCREEN Note • Displaying a picture in a Normal mode for extended periods of time ma y cause phosphor burn-in. • A var iety of picture modes are available with this display . Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV pr o gram o ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 19
E-19 Information Y ou may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the V i sta Vision or Cinema V ision size i.e., the sizes used frequently for picture software. ASPECT RA TIO The follo wing aspect ratios are av ailable. 16:9 aspect ratio (HDTV broadcasting) 4:3 aspect ratio ( ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 20
E-20 ADJUSTING PICTURES (PICTURE MENU) Press . The main menu screen will appear . Press or to select “PICTURE”. Each time you press or , one of the av ailab le menus appears in the follo wing sequence: The PICTURE Menu screen will appear . Press or to select “T int”. Press . The “T int” adjustment screen will appear . Press or to change ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 21
E-21 • Setting Picture Mode (Picture Mode) Can set up the picture mode. Each time you press or , one of the av ailable choices appears in the following sequence: Dynamic: Suitable f or watching a normal motion picture.(Standard) Real: Makes a strong contrast picture. Static: Suitable for watching a still picture. Press to store. * Select Dynamic, ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 22
E-22 ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) Press . The main menu screen will appear . Press or to select “POSITION/SIZE”. Each time you press or , one of the av ailab le menus appears in the follo wing sequence: The POSITION/SIZE Menu screen will appear . Press or to select “Position”. Press . The “Position” adjustment ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 23
E-23 RGB mode -150 to +150 -12 to +25 (P42HCA10/11/12) -25 to +50 (P42VCA10/11/12, P50XCA10/11/12, P42VCA20/21/22) * On-screen information disappears if you do not take any action for about 60 seconds. Adjusting Screen Position (Position) Horizontal position (Horizontal) : Moves screen to the right. : Moves scr een to the left. V ertical position ( ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 24
E-24 ADJUSTING AUDIO (AUDIO MENU) Press . The main menu screen will appear . Press or to select “AUDIO”. Each time you press or , one of the av ailable menus appears in the following sequence: The A UDIO Menu screen will appear . Press or to select “Balance”. Press . The “Balance” adjustment screen will appear . Press or to adjust the b ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 25
E-25 Adjusting T reble (T reble) Any v alue between -6 and +6 can be selected. : Stronger treble : W eaker treble Adjusting Bass (Bass) Any v alue between -6 and +6 can be selected. : Stronger bass : W eaker bass Adjusting V olume Balance (Balance) Any v alue between -10 and +10 can be selected. : Higher v olume from the right-hand speaker : Higher ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 26
E-26 OTHER ADJUSTMENTS (FEA TURES MENU) Press . The main menu screen will appear . Press or to select “FEA TURES”. Each time you press or , one of the av ailable menus appears in the following sequence: The FEA TURES Menu screen will appear . Press or to select "On Screen Menu". • Select a desired option for adjustment/setup from Ad ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 27
E-27 • FEA TURES setup screen has the following 4 options. Adjustment : Can make a fine adjustment of pictures such as Dot Cloc k, Clamp Position. On Screen Menu : Can make a display setting such as OSD, Language. (See P . E-28.) Input T erminal : Can make an input terminal setting such as V ideo Input. (See P . E-28–E-29.) Others : Can make ot ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 28
E-28 • Setting Display Information (OSD) Y ou can use this option to select whether to display infor mation other than menus. (Error messages are displayed regardless of what choice you make f or this option.) Each time you press , one of the av ailable choices appears in the following sequence: On Off On : Displays all information. Off : Display ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 29
E-29 * On-screen information disappears if you do not take any action for about 60 seconds. INPUT TERMINAL "BNC-Input" selection screen This fringe part is masked. English • Selecting BNC Input (BNC-Input) Y ou can use this option to select the signal system it will receive to BNC Input terminal. (1) Select BNC Input and press . BNC Inp ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 30
E-30 OTHER ADJUSTMENTS (FEA TURES MENU)(C ontinued) OTHERS MENU • Selecting time before DPMS starts (DPMS) Y ou can use this option to select the amount of time before the DPMS function starts. DPMS (which stands for “display po wer management signaling”) allows the display to maintain an automatic power sa ving function. This function causes ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 31
E-31 English • Minimizing phosphor burn-in (Screen Orbiter) Y ou can use this option to move the screen position to minimize phosphor -induced “burn-in”. Follo w the steps below . (1) Select “Screen Orbiter” and press . The “Screen Orbiter” setting screen will appear . (2) Press or to select “Mode/T ime”. (3) Select a desired patt ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 32
E-32 OTHER ADJUSTMENTS (FEA TURES MENU)(C ontinued) • Assigning Numbers to Displays (Monitor No.) When you use two or more displays, you can use a single remote control to control indi vidual displays by assigning a unique number to each of the displays. Each time you press or , one of the av ailab le numbers appears in the following sequence: 0: ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 33
E-33 English • Setting Exhibition Mode (Exhibition Mode) Y ou can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons. Each time you press or , one of the av ailable choices appears in the following sequence: On Off On: Sets up Exhibition mode. Of f: Sets up normal mode. Press to store. * In ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 34
E-34 INITIALIZA TION OF USER ADJUSTMENT V ALUE (F ACTOR Y DEF AUL T) Press . The main menu screen will appear . Press or to select “F ACTORY DEF AUL T”. Each time you press or , one of the av ailable menus appears in the follo wing sequence: The F A CTOR Y DEF A UL T Menu screen will appear . Press . • Displays the message of whether to proce ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 35
E-35 English OPTIONS W all-mounting unit 0° to 15° mounting angle P-WB4200 Hanging unit 0° to 15° mounting angle P-CT4200 Stand P-TT4200 Speaker P-42SP11 (for 42”) P-50SP01 (for 50”) (1 set of 2 speakers) Speaker Stand P-42ST11 (for 42”) P-50ST01 (for 50”) (1 set of 2 speakers stands) * When installing an option, make sure that all inst ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 36
E-36 FACTOR Y SETTINGS This display can store the latest four types of signals for RGB adjustment v alue. The fifth input signal will replace the adjustment v alue of the first input signal. T o do this, select a desired signal and follow the instructions in “ Adjusting Screen Position and Size” on P . E-22–E-23 to adjust the parameters. When ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 37
E-37 English SPECIFICA TION Model P42VCA10W/E/A P42VCA11W/E/A P42VCA12W/E/A Screen size 42" wide screen: 92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) Aspect ratio 16:9 (wide) W eight 28.5 kg / 62.8 lbs Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm 40.7 (W) x 25.2 (H) x 3.3 (D) inch Po we ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 38
E-38 SPECIFICA TION (Continued) Model P42HCA10W/E/A P42HCA11W/E/A P42HCA12W/E/A Screen size 42" wide screen: 92.2 cm (W) x 52.2 cm (H) (106.0 cm diagonal) 36.3 inch (W) x 20.6 inch (H) (41.7 inch diagonal) Aspect ratio 16:9 (wide) W eight 28.5 kg / 62.8 lbs Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm 40.7 (W) x 25.2 (H) x 3.3 (D) inch P ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 39
E-39 English Model P50XCA10W/E/A/U P50XCA11W/E/A/U P50XCA12W/E/A/U Screen size 50" wide screen: 110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal) 43.5 inch (W) x 24.5 inch (H) (50.0 inch diagonal) Aspect ratio 16:9 (wide) W eight 45.0 kg / 99.2 lbs Outer dimensions 121.2 (W) x 72.6 (H) x 9.8 (D) cm 47.7 (W) x 28.6 (H) x 3.9 (D) inch Po wer supply ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 40
E-40 SPECIFICA TION (Continued) • Specifications and e xternal appearance may be change for the sake of improvement. • is a worldwide trademark of Fujitsu General Limited and is a re gistered trademark in Japan, the U.S.A. and other countries or areas. Model P42VCA20W/E/A/U P42VCA21W/E/A/U P42VCA22W/E/A/U Screen size 42" wide screen: 92.0 ...
-
Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 - page 41
E-41 English Action • Check w hether the po wer plug is securely inserted into the r eceptacle. • Check cables for disconnection. • Check w hether the po wer for all input equipment is ON. • Check for connection to wrong terminals or for wrong input mode. • Check w hether the input mode display is colored pink.Special setup may ha ve been ...
¿Tienes una pregunta acerca de Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Fujitsu P42VCA10/P42HCA10/P50XCA10/P42VCA20/ P42VCA11/P42HCA11/P50XCA11/P42VCA21/ P42VCA12/P42HCA12/P50XCA12/P42VCA22 probablemente compartirá una forma de solucionarlo.