-
Toshiba DEV001Z - page 1
E6581268 ① V F - S 1 1 B u i l t - i n B o a r d O p t i o n DEV001Z Function Manual * The data given in this manual ar e subjec t to change without notice. © T O SHIBA INVER T E R CORPORA T ION 2004 All right s reserv ed. ...
-
Toshiba DEV001Z - page 2
E6581268 ① - 1 - Contents 1. INTRODUCTION ................................................................................................................. .............. 3 1.1. Usage Pr ecautions .......................................................................................................... ..................... 3 1.2. General S pecif ...
-
Toshiba DEV001Z - page 3
E6581268 ① - 2 - 3.8. AC Drive Object .................................................................................................................. ................ 24 3.8.1. AC Drive Object Class Attributes ................................................................................................. 24 3.8.2. AC Drive Object Ins tance A ...
-
Toshiba DEV001Z - page 4
E6581268 ① - 3 - 1. Introduction Thank you for purchasing the Dev iceNet communications in terface PW B “DEV001Z” for the VFS11. Before using the DeviceNet interface, please familiarize y ourself with the product and be sure to thoroughly read the instructions and precautions contained in this manual. In addition, please make sure that this m ...
-
Toshiba DEV001Z - page 5
E6581268 ① - 4 - 2. Connection Information 2.1. Connection Sizes Connection Instance Produced Consumed I/O M essaging 4 or 8 bytes 4 or 8 bytes Explicit M essaging 49 bytes 49 bytes Notes - For the Explicit M essaging connection, this is the maximum message length: shorter messages are also acceptable. - For the Polled I/O connection, if the actu ...
-
Toshiba DEV001Z - page 6
E6581268 ① - 5 - 2.3. DeviceNet indi cators (Status LED) MS (M odule status) This bi–color (gr een/red) LED indica tes the s tatus of the com m unication link f rom DEV001Z to the VF- S11. It indicates whether or not the devic e has power and is operating properly. (According to OD VA DeviceNet Specif ications.) NS (Network status) This bi–co ...
-
Toshiba DEV001Z - page 7
E6581268 ① - 6 - 2.4. VF-S11 communication parameters In a network, VF-S11 (D EV001Z) serves as a DeviceNet slave device. T he DEV001Z configur ation is set by the following parameter s. The supported par am eters f or each drive and their allowable adjustm ent r anges are defined in the appropr iate Electronic Data Sheet ( EDS) files . EDS files ...
-
Toshiba DEV001Z - page 8
E6581268 ① - 7 - 3. Object Specifications This section contains the object s pecifications for all DeviceNet objects currently supported by the “DEV001Z”. Table 1 outlines those objects cov ered: Class Code Object Class Page 0x01 Identity 8 0x02 Message R outer 9 0x03 D eviceNet 10 0x04 Assembly 11 0x05 C onnection 19 0x28 Motor Data 21 0x29 ...
-
Toshiba DEV001Z - page 9
E6581268 ① - 8 - 3.1. Identity Object Class code 0x01. This object prov ides identification of and general information about the device. 3.1.1. Identity Object Class A ttributes Attribute ID Name Data Ty pe Access Rules Description Default Value 1 Revision UINT Get Revision of this object 1 2 Max instance UINT Get Max imum instance number of an o ...
-
Toshiba DEV001Z - page 10
E6581268 ① - 9 - 3.2. Message Router Class code 0x02. The M essage Router Object provides a messaging connection point through which a Client may address a service to any object class or instance residing in the DeviceNet interface unit. 3.2.1. Message Router Class Attri butes Not supported. 3.2.2. Message Router Instance Attributes Attribute ID ...
-
Toshiba DEV001Z - page 11
E6581268 ① - 10 - 3.3. DeviceNet Object Class Code 0x03. T he DeviceNet Object prov ides for the configuration and status of a DeviceNet port. 3.3.1. DeviceNet O bject Class A ttributes Attribute ID Name Data Ty pe Access Rules Description Default Value 1 Revision UINT Get Revision of this object. 2 3.3.2. DeviceNet Obj ect Instance A ttributes A ...
-
Toshiba DEV001Z - page 12
E6581268 ① - 11 - 3.4. A ssembly Object Class code 0x04. The Assembly Object binds attributes of multiple objects, w hich allows data to or from each object to be sent or received over a single connection. 3.4.1. A ssembly Object Class A ttributes No supported. 3.4.2. A ssembly Object Instance A ttributes Attribute ID Name Data Ty pe Access Rules ...
-
Toshiba DEV001Z - page 13
E6581268 ① - 12 - 3.4.5. A ssembly Instance Details 3.4.5.1. Instance 20/70 – Dev iceNet Stand ard ( f894 = 0) By te Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 0 - - - - - Fault reset - Run forward 1- 2 Drive Reference Speed min -1 (Low byte) * 3 Drive Reference Speed min -1 (High by te) * Fig. 1 Out put In stance 20 Layout By te Bit 7 Bit ...
-
Toshiba DEV001Z - page 14
E6581268 ① - 13 - 3.4.5.2. Instance 21/71 – Dev iceNet Stand ard ( f894 = 1) By te Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 0 - Net Ref * Net Ctrl * - - Fault reset Run reverse Run forward 1- 2 Drive Reference Speed min -1 (Low byte) 3 Drive Reference Speed min -1 (High by te) Fig. 3 Out put In stance 21 Layout By te Bit 7 Bit 6 Bit 5 Bi ...
-
Toshiba DEV001Z - page 15
E6581268 ① - 14 - Examples of Inst ance 21/71 ① Stop I n s t a n c e B y t e 1 5 1 4 1 3 1 2 1 1 1 0 987654321 0 H e x . 1, 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0000 Output Instance 21 3 , 2 --------- ------- - 1, 0 000 000 11 000 1 0 0 0 0 0x0310 Input Instance 71 3, 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0000 ② Forward r unning 1800m in-1 I n s ...
-
Toshiba DEV001Z - page 16
E6581268 ① - 15 - 3.4.5.3. Instance 100/150 – T oshib a Specific ( f894 = 2) By te Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 0 DC braking ACC1/ ACC2 PI off THR2 Preset Speed4 Preset Speed3 Preset Speed2 Preset Speed1 1 Command link * Frequency link * Reset trip Emergency stop Free run (ST) Run/stop Fw/ Reverse Jog 2 Driv e Reference Speed ...
-
Toshiba DEV001Z - page 17
E6581268 ① - 16 - Examples of Inst ance 100/150 ① Stop I n s t a n c e B y t e 1 5 1 4 1 3 1 2 1 1 1 0 987654321 0 H e x . 1, 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x0000 Output Instance 100 3 , 2 ------------ ---- - 1, 0 0 1 00 1 0 0 0 0 0 0 0 0 0 0 0 0x4800 Input Instance 150 3, 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0x 0000 ② Forward r unning 60Hz ...
-
Toshiba DEV001Z - page 18
E6581268 ① - 17 - 3.4.5.4. Instance 101/151 – T oshib a Specific ( f894 = 3) By te Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 0 - Net Ref Net C trl - - Fault reset Run reverse Run forw ard 1- 2 Drive Reference Speed min -1 (Low byte) 3 Drive Reference Speed min -1 (High by te) 4 Index (Low byte) 5 W rite Index (H igh byte) 6 Data (Low by t ...
-
Toshiba DEV001Z - page 19
E6581268 ① - 18 - Examples of Inst ance 101/151 Access the inverter par am eter is enabled using byte 4 to 6 of this Inst ance. Set the com m unication num ber of the param eter to byte 4, 5 (Index), and the value to byte 6, 7 (Data). In case of the monitor parameter “FE* *”, the value becomes "c om m unication num ber - 0xF000 (s am e a ...
-
Toshiba DEV001Z - page 20
E6581268 ① - 19 - 3.5. Connect ion Object Class code 0x05. The C onnection Class allocates and manages the internal resources associated with both I/O and Ex plicit Messaging Connections. 3.5.1. Connection Object A ttributes Not supported. 3.5.2. Connection Object Instance A ttributes Connection Instance ID # Description 1 References the Ex plici ...
-
Toshiba DEV001Z - page 21
E6581268 ① - 20 - 3.5.2.2. Poll Connect ion Ob ject Instance Attributes (In stance 2) Attribute ID Name Data Ty pe Access Rules Description Default Value 1 state USINT Get State of the object - 2 instance_type USINT Get Indicates connection type 1 3 transportClass_trigger USINT Get Connection behavior 0x82 4 produced_connection_id UINT Get Placed ...
-
Toshiba DEV001Z - page 22
E6581268 ① - 21 - 3.6. M otor Data Object Class code 0x28. This object serv es as a database for motor parameters. 3.6.1. Motor Data Object Class Attri butes Attribute ID Name Data Ty pe Access Rules Description Default Value 1 Revision UINT Get Revision of this object 1 2 Max instance UINT Get Max imum instance number of an object currently crea ...
-
Toshiba DEV001Z - page 23
E6581268 ① - 22 - 3.7. Control Supervisor Object Class code 0x29. T his object models all the management func tions for devices within the Dev iceNet “Hierarchy of M otor Control Devices”. The behavio r of motor control devices is described by the State Transition Diagram. 3.7.1. Control Supervi sor Object Class A ttributes Attribute ID Name ...
-
Toshiba DEV001Z - page 24
E6581268 ① - 23 - 3.7.3. Control Supervi sor Object Common Servi ces Supported Service Code Service Name Class Instance Description of Service 0x05 R eset N/A Yes Used to reset all resettable connection objects. 0x0E G et_Attribute_Single Yes Yes Returns the contents of the specified attribute. 0x10 Set_Attribute_Single N/A Ye s Modifies the v al ...
-
Toshiba DEV001Z - page 25
E6581268 ① - 24 - 3.8. AC Drive Object Class code 0x2A. T his object models the f unctions specific to an AC Drive. e.g. speed ramp, torque control etc 3.8.1. AC Drive Obj ect Class A ttributes Attribute ID Name Data Ty pe Access Rules Description Default Value 1 Revision UINT Get Revision of this object 1 2 Max instance UINT Get Max imum instanc ...
-
Toshiba DEV001Z - page 26
E6581268 ① - 25 - 3.9. Vender Specific Device Pro-files Class code 0x64. This object prov ides VF-S11’s Parameter access. All parameter’s Attribute ID is 3. Refer to the following about each parameter’s Instance ID . Example 1. In case of Basic parameter “CM Od - Command mode selection”, Communication N o: 0 003 -> Instance ID: 1 003 ...
¿Tienes una pregunta acerca de Toshiba DEV001Z?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Toshiba DEV001Z, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Toshiba DEV001Z probablemente compartirá una forma de solucionarlo.