-
Oricom P80 - page 1
Oricom P80 Series 1.8GHz DECT Cordless phone Keep this user guide for future reference. WARNING DO NOT USE STANDARD/ALKALINE BATTERIES IN THIS PRODUCT, AS THERE IS A RISK OF EXPLOSIO N AND/OR INJURY. USE ONLY Ni- MH RECHARGEABLE BATTERIES AS SPECIFICED IN THIS USER GUIDE. CONTACT ORICOM FOR REPLACEMENT BATTERIES ...
-
Oricom P80 - page 2
2 Contents Pack Cont ents ............................................................................................................. 5 GETTING STARTED................................................................................................... 6 Key Layou t ................................................................................... ...
-
Oricom P80 - page 3
3 Deregist er ............................................................................................................. 17 PIN c ode ............................................................................................................... 18 Reset ............................................................................................ ...
-
Oricom P80 - page 4
4 E Environment and safety • Avoid exposure of this tel ephone to moisture or liquid. • To prevent electric shock, do not open the handset or base cabinet. • Avoid metallic contact (e.g. metal clips, keys) between the battery contacts and charging conductors. • There is a slight chance that the telephone could be damaged by an electrical st ...
-
Oricom P80 - page 5
5 Do not use your telephone during an electrical storm thunderstorm as it is possible to get an electric shock. Refer to information contained in the White pages directory. Use only the mains adapter supplied with this product. Incorrect adapter polarity or voltage can seriously damage the unit. Adaptor for base:- Input: 230 VAC 50 Hz Output: 6VDC ...
-
Oricom P80 - page 6
6 GETTING STARTED Key Layout GETTING STARTED ¿ / Ringer On-Off LCD Display Talk / Recall Redial CID / Scroll backward Mute / Delete OK / Program Page # / Keylock / Pause Intercom / Conference Off / Exit Phonebook CID / Scroll forward ...
-
Oricom P80 - page 7
7 LCD display on the handset The handset is linked to the base Displays the current battery level. It scrolls during charging. Appear together with either handset or base ringer setting. Use to set the handset ringer. Use to set the base ringer. Use to set the recall duration. Use to register the handset. There are more digits on the left There are ...
-
Oricom P80 - page 8
8 Initial Setup 1. Connect the output plug of the ma ins adapter to the adapter socket on the back of the base unit and the mai ns adapter to the wall m ains supply. 2. Connect the telephone lead to the phone cord socket on the back of the base unit and to the wall phone socket. 3. Remove the battery door on the handset by lifting the battery door ...
-
Oricom P80 - page 9
9 BASIC OPERATIONS During standby When the phone is in standby, the LCD displays the handset label. The handset number related to the connected base will also be displayed right justified. The battery icon reflects the current battery level and the signal icon indicates the handset is linked to the base. Answering an incoming external call When the ...
-
Oricom P80 - page 10
10 Predialing Pre-dial allows you to enter a te lephone number and verify it on the screen before you place the call. The screen di splays the last 12 digits dialed but you can enter up to 20 digits. 1. Enter the phone number. 2. To enter a pause, press and hold # . A pause is displayed as “ P ”. 3. When you enter more than 12 digits, turns on. ...
-
Oricom P80 - page 11
11 When you end a call, the timer will be displayed for 5 more seconds before the screen returns to the handset label. Adjusting the volume During a call you can adjust the earpiece volume. Press to adjust the receiver volume. The display shows the volume level of high “ OOO ”, medium “ OO ” or low “ O ”. NOTE: When you hang up the volu ...
-
Oricom P80 - page 12
12 1. When the handset receives a sec ond call, the number of the caller appears on the display. It will display for 20 seconds or until you press a key on the phone. Press listen for dial tone then Press 2 to put the current call on hold and talk with the second caller. 2. Subsequent presses of listen for dial tone then Press 2 will toggle you bet ...
-
Oricom P80 - page 13
13 2. If there is caller name in the CID record, the first 8 characters are displayed for you to edit. If no caller name is available, you will be prompted to enter a name. 3. Press OK to save the name. You will not be able to save it if this name already exists in the phonebook. Edit the name and try again. 4. Edit the number if necessary and pres ...
-
Oricom P80 - page 14
14 3. Press OK to save the name. You will not be able to save it if this name already exists in the phonebook. Edit the name and try again. 4. Edit the number if necessary and press OK to s ave it. You have saved the number as a phonebook record. This record in the redial list will now show the name t hat you have assigned to this number. Deleting ...
-
Oricom P80 - page 15
15 The number buttons are al so inscribed with letters for ente ring the name. By repeatedly pressing the appropriate bu tton, upper case letters as well as numbers and special characters can be entered. KEY 1x 2x 3x 4x 5x 1 Space 1 2ABC A B C 2 3DEF D E F 3 4GHI G H I 4 5JKL J K L 5 6MNO M N O 6 7PQRS P Q R S 7 8TUV T U V 8 9WXYZ W X Y Z 9 0 0 * # ...
-
Oricom P80 - page 16
16 Deleting the entire phonebook 1. While reviewing the phonebook, press and hold DEL . 2. Press OK when prompted to confirm the action. The phonebook is now empty. PROGRAMMING THE PHONE Press PROG during standby to enter program mode. All programming icons will appear in order with the firs t icon on the left flashing. You can then press to select ...
-
Oricom P80 - page 17
17 You cannot program the base ri nger if t he handset has lost link with the base. UNAVAIL will be displayed. Re-establish the link and try again. Recall duration When you are talking on the phone, pressing will send a flash signal. Recall settings are; Australia (Recall 1)100ms and New Zealand (Recall 2) 600ms. You should not need to change these ...
-
Oricom P80 - page 18
18 PIN code A PIN is required for registration and der egistration. The ex-factory PIN is 0000 but you can change this code. 1. Press PROG during standby follow by the 8 key. 2. Enter the current PIN and press OK . 3. Enter the new PIN. It can contain from 0 up to 8 digits. Press OK . 4. Repeat the new PIN and press OK to confirm the new code. You ...
-
Oricom P80 - page 19
19 Shortcut to turn handset ringer on/off You can use this shortcut to turn on/off the handset ringer when the phone is in standby. Simply press and hold . appears whenever the handset ringer is turned off. Message waiting indication You have to subscribe to a voice message service (eg Telstra Message Bank) from your local service provider to use t ...
-
Oricom P80 - page 20
20 Making an internal call When the phone is in standby, 1. Press INT . turns on and you’ll hear an internal dialing tone. 2. Press the number of the handset that you want to call. (Or you can press the handset number first, followed by INT .) You will hear a busy tone if the ot her handset is not available. To end an internal call, press or retu ...
-
Oricom P80 - page 21
21 TROUBLESHOOTING Are you having trouble with your phone? Here are some answers to common questions. Problems Solutions The phone does not work at all • Make sure that adapter and phone cord are connected properly. • Check that the batteries are fully charged and installed properly. • This phone does not work during power failure. The phone ...
-
Oricom P80 - page 22
22 services. This device may be subject to ringing or bell tinkle when certain other devices are connected to the same line. If this occurs, the problem should not be referred to the Telecom Faults service. This equipment shall not be set to ma ke automatic calls to the Telecom “111” Emergency Service. This equipment may not provide for the eff ...
-
Oricom P80 - page 23
23 If the fault is still present, connect anot her telephone (if available) to the telephone socket. The results will show you whether the fault lies with this unit or with the telephone line. If the product is working correctly t he fault is on the telephone line. Please contact your network operator for assistance. To orders spare parts additiona ...
¿Tienes una pregunta acerca de Oricom P80?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Oricom P80, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Oricom P80 probablemente compartirá una forma de solucionarlo.