-
Linksys EFVCD20 - page 1
EtherFast ® Series Instant GigaCD Ser ver Use this guide to install: EFVCD20 User Guide ...
-
Linksys EFVCD20 - page 2
COPYRIGHT & TRADEMARKS Copyright © 2000 Linksys, All Rights Reserved. EtherFast is a register ed trademark of Linksys. Microsoft, Windows, and the Windows logo ar e register ed trademarks of Microsoft Corporation. All other trademarks and brand names ar e the property of their respective pr oprietors. LIMITED W ARRANTY Linksys guarantees that ...
-
Linksys EFVCD20 - page 3
EtherFast Series Instant GigaCD Server Introduction The Linksys EtherFast Instant GigaCD Server W ith 20 gigabytes of storage space, the Instant GigaCD Server can sa ve v alu- able time and space b y sharing your fa vorite CD-R OMs. F aster and less cum- bersome than a standard CD-R OM jukebox, the Instant GigaCD Server allo ws your CD-R OM data to ...
-
Linksys EFVCD20 - page 4
Instant GigaCD Server 3 Getting to Know the EtherFast Instant GigaCD Ser ver The Instant GigaCD Server’ s Rear Panel The rear panel of the Server is where all of the Servers connections are made. P o wer Switch The po wer s witch is a spring-loaded soft switch for turning the po wer to the Server on and of f. If the Server is not po w ered on, pr ...
-
Linksys EFVCD20 - page 5
Instant GigaCD Server Copy Button This button is pressed to cop y a CD to the hard disk, thus creating a virtual CD image. While cop ying, you ma y experience dif f iculty using the Server’ s other features and should wait until the Server has completed cop ying the image. Copied CD images will be sa ved to the default AutoCab folder . Y ou can c ...
-
Linksys EFVCD20 - page 6
Instant GigaCD Server 7 Connecting The EtherFast Instant GigaCD Ser ver to Y our Network 1. Connect a Netw ork Ca ble from the RJ-45 por t in the back of the Ser ver to your Hub or Switch to w hich the Ser ver will be connected. The Ser ver will auto-sense a 10BaseT or 100BaseTX connection at full or half duplex. 2. Connect y our po wer with the su ...
-
Linksys EFVCD20 - page 7
Instant GigaCD Server 9 8 Press Next to continue. TCP/IP: DHCP Client - Obtain IP Address Y ou can enable this setting, if there is a DHCP or Automatically Bootp server connected to your LAN , to obtain the Server’ s IP Address. Since this is a Server , how ev er , it is best to use a Fix ed IP Address. Fix ed IP Address Y ou can enter your F ixe ...
-
Linksys EFVCD20 - page 8
Using the EtherFast Instant GigaCD Ser ver 1. Start up the Instant GigaCD Manager Utility . It will automaticall y scan the netw ork for the Ser ver and then the main screen will appear . 2. In the left panel, you will see a displa y of the Servers cur rently connected to your netw ork. Click on that Server that you wish to access. Y ou will be pro ...
-
Linksys EFVCD20 - page 9
Instant GigaCD Server E-Mail - F or enabling E-mail messages sent to y ou in the e vent of a prob lem or er ror . Shutdo wn - F or shutting do wn and setting a shutdown schedule. General This data was pro vided within the Setup Utility and can be adjusted here. • Serv er Name Y ou can change the name of the Server so it appears differentl y on Y ...
-
Linksys EFVCD20 - page 10
Instant GigaCD Server • Enab le E-Mail Notif ication of Prob lems This must be checked for E-Mails to be sent. At least one E-Mail address must be pro vided. • E-Mail Addr ess Enter from one to three E-Mail addresses in these f ields to which an y messages will be sent. • Subject (optional) This text will be used as a default “Subject” li ...
-
Linksys EFVCD20 - page 11
Instant GigaCD Server TCP/IP This data was pro vided within the Setup Utility and can be adjusted here. • DHCP Client A DHCP (Dynamic Host Conf iguration Protocol) Server pro vides an IP Address to PCs and other devices on the netw ork. This should be selected if you ha ve a DHCP Server on your Netw ork. • Fixed IP Ad dr ess If Y our Netw ork d ...
-
Linksys EFVCD20 - page 12
Instant GigaCD Server Micr osoft Input information under this tab to conf igure for Microsoft netw orking. • W or kgr oup This should match the name of your W orkgroup. Users in other w orkg roups will still be able to use the Instant GigaCD Server . • Code P age Select the appropriate region within w hich you are running the Ser ver . The opti ...
-
Linksys EFVCD20 - page 13
Instant GigaCD Server Upgrade This allo ws you to upgrade the Instant GigaCD Ser ver’ s f irmware. Remember that the Server is una v ailable during upgrade process and that all connections are lost, including the one used to start the Upg rade. The upg rade procedure ma y take up to ten minutes. Once it is completed , reboot the Ser ver if it doe ...
-
Linksys EFVCD20 - page 14
Instant GigaCD Server • Default Serv er Name This is the name gi ven to the Server b y the factor y . • Serv er Name This is the name gi ven to the Server b y the user or , if one has not been selected b y the user , it is identical to the Def ault Server Name. • Date Cur rent date, pro vided by the Server’ s clock/calendar . • Time Curre ...
-
Linksys EFVCD20 - page 15
Instant GigaCD Server 25 24 Use Compression If this is selected , then the CD image f ile is more com- pressed and will occup y less space on the hard disk. Ho we ver , selecting Use Compression prevents File Sharing . File Sharing If this is selected , users within Y our Netw ork will be able to access the CD images on the Server . Name Enter the ...
-
Linksys EFVCD20 - page 16
Instant GigaCD Server 27 26 2. If a line such as “TCP/IP -> Netw ork Card” is not listed , then you need to install the TCP/IP protocol on your PC b y selecting Add - Protocol - Microsoft - TCP/IP - OK. 3. W ith the TCP/IP entry high- lighted , select Properties. Go to the IP Address tab and you should see a screen like the fol- lo wing: T o ...
-
Linksys EFVCD20 - page 17
Instant GigaCD Server After f irst installation and reboot, you can use the "Setup Instant GigaCD Driv e" icon in the Selector utility create new CD R OM driv es and set their driv e letters. When you do this, y ou need to reboot. After rebooting, W indo ws 2000 will prompt you to reboot a second time. There is no need for a second reboot ...
-
Linksys EFVCD20 - page 18
EtherFast Cable/DSL Routers BE SURE T O HA VE Y OUR PROOF OF PURCHASE AND A BARCODE FR OM THE PR ODUCT'S P A CKA GING ON HAND WHEN CALLING. RETURN REQUESTS CANNO T BE PR OCESSED WITHOUT PR OOF OF PURCHASE. IN NO EVENT SHALL LINKSYS’ LIABILITY EXCEED THE PRICE P AID FOR THE PRODUCT FR OM DIRECT , INDIRECT , SPECIAL, INCI- DENT AL, OR CONSEQUE ...
-
Linksys EFVCD20 - page 19
© Copyright 2000 Linksys, All Rights Reserved. http://www .linksys.com ...
¿Tienes una pregunta acerca de Linksys EFVCD20?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Linksys EFVCD20, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Linksys EFVCD20 probablemente compartirá una forma de solucionarlo.