-
Black Box LMC5114C-R3 - page 1
LMC5022C-R3 LMC5110C-R3 L MC5116C-R3 LMC5182C-R3 LMC5023C-R3 LMC5111C-R3 L MC5117C-R3 LMC5026C-R3 LMC5113C-R3 L MC5180C-R3 LMC5027C-R3 LMC5114C-R3 L MC5181C-R3 High-Density Media Converter System II Layer 2 Modules True Layer 2 conversion enables you to extend y our network up to 40 kilometers over duplex fiber. ...
-
Black Box LMC5114C-R3 - page 2
FCC and IC RFI Statements Page 2 724-746-5500 | blackbox.com LMC5022C-R3 FCC and Industry Canad a RF Interference Statem ents Class B Digital Device. This equipment has been tested and found to c omply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection agai ...
-
Black Box LMC5114C-R3 - page 3
Certifications LMC5022C-R3 724-746-5500 | blackbox.com Page 3 Certifications European Directive 2002/ 96/EC (WEEE) requires that any equipment that bears this symbol on product or packaging must not be disposed of with unsorted municipal waste. This symbol indicates that the equipment should b e disposed of separately from regular hous ehold wa ste ...
-
Black Box LMC5114C-R3 - page 4
Table of Contents Page 4 724-746-5500 | blackbox.com LMC5022C-R3 Table of Contents Part Numbers .................................................................................................. 5 1. Specifications ............................................................................................ 6 2. Overview: About the High-Density Medi ...
-
Black Box LMC5114C-R3 - page 5
Part Numbers LMC5022C-R3 724-746-5500 | blackbox.com Page 5 Part Numbers Part Number Description LMC5022C-R3 TX/FX-MM1300-ST LMC5023C-R3 TX/FX-MM1300-SC LMC5026C-R3 TX/FX-SM1310/PLUS-ST LMC5027C-R3 TX/FX-SM1310/PLUS-SC LMC5110C-R3 TX/FX-SM1310/LONG -SC LMC5111C-R3 TX/FX-SM1310/LONG -ST LMC5113C-R3 TX/SSFX-SM1310-SC (1310xmt/1550rcv) LMC5114C-R3 TX/ ...
-
Black Box LMC5114C-R3 - page 6
Chapter 1: Specifications Page 6 724-746-5500 | blackbox.com LMC5022C-R3 1. Specifications DC Input L2 w/LFPT: 0.80 Amp @ 5V Operating Temperature: +32° F to +122° F (0° C to +50° C) Storage Temperature: 0° F to +122° F (-20° C to +70° C) Humidity: 5 - 95% (non-condensing) Fiber Optic Specifications For fiber optic specifications, please vi ...
-
Black Box LMC5114C-R3 - page 7
Chapter 2: Overview LMC5022C-R3 724-746-5500 | blackbox.com Page 7 2. Overview: About the High-Density Media Conv erter System II Lay er 2 Modules The L2 is a Fast Ethernet module whic h provide s a si ngl e conversion between 100BASE-TX twisted pair and 100BASE-FX/ SX single-mode or multi-mode fiber. Each L2 includes one RJ-45 con nector and one p ...
-
Black Box LMC5114C-R3 - page 8
Chapter 3: Configuration Page 8 724-746-5500 | blackbox.com LMC5022C-R3 3. Configuration The L2 has user-configurable features (e.g., FiberAlert (FA), TX LinkLoss (TXLL), FX LinkLoss (FXLL), Link Fault Pass-Thro ugh (LFPT) and Far End Fault (FEF)). Refer to the Managed Media Converte r Module DIP Switch Configuration Table for information o n avail ...
-
Black Box LMC5114C-R3 - page 9
Chapter 4: Install the High-Density Media Converter System II Layer 2 Modules LMC5022C-R3 724-746-5500 | blackbox.com Page 9 4. Install the High-Density Media Conv erter System II Layer 2 Modules The Managed Media Converter Mod ule s install in Black Box SNMP manageable High-Density Media Conv e rter System II chassis. NOTE All modules are hot-swap ...
-
Black Box LMC5114C-R3 - page 10
Chapter 4: Install the High-Density Media Converter System II Layer 2 Modules Page 10 724-746-5500 | blackbox.com LMC5022C-R3 SNMP Management Module, the High Density L2 Module with Configuration Control will function ba sed on its DIP Switch settings. If the DIP Switches have not been change d, the stored configuratio n will be used. The stored co ...
-
Black Box LMC5114C-R3 - page 11
Chapter 4: Install the High-Density Media Converter System II Layer 2 Modules LMC5022C-R3 724-746-5500 | blackbox.com Page 11 DIP Switch on S1 Feature Default Setting 1 Auto Negotiation (AN) ON 2 Far End Fault (FEF) OFF 3 FX LinkLoss (FXLL) OFF 4 TX LinkLoss (TXLL) OFF 5 FiberAlert (FA) OFF 6 Factory Default OFF 7 Factory Default OFF 8 Factory Defa ...
-
Black Box LMC5114C-R3 - page 12
Chapter 4: Install the High-Density Media Converter System II Layer 2 Modules Page 12 724-746-5500 | blackbox.com LMC5022C-R3 pulses, it knows that the device to which it is connect ed is up and sending pulses, and that the copper or fiber cabl e coming from that device is intact. The appropriate “LNK” (link) LED is lit to indicate this. The Bl ...
-
Black Box LMC5114C-R3 - page 13
Chapter 4: Install the High-Density Media Converter System II Layer 2 Modules LMC5022C-R3 724-746-5500 | blackbox.com Page 13 Regardless if there is a break in segm ent 1, 2 or 3, the link will drop on the switches at both ends. The link faul t is passed throu gh the media conversion and is observed at each end. It acts ju st like it would if the d ...
-
Black Box LMC5114C-R3 - page 14
Chapter 4: Install the High-Density Media Converter System II Layer 2 Modules Page 14 724-746-5500 | blackbox.com LMC5022C-R3 WARNING Enable FiberAlert at the remote side of a media co nversi on only. Enabling it on both sides would keep both transm itters disab led indefinitely. By default FA is disabled. When enabled if, a fault occurs on the fib ...
-
Black Box LMC5114C-R3 - page 15
Chapter 4: Install the High-Density Media Converter System II Layer 2 Modules LMC5022C-R3 724-746-5500 | blackbox.com Page 15 4.4 Auto Negotiation on High-Density Media Converter Sy stem II Layer 2 Modules L2 modules include the feature Auto Negotiation. When Auto Ne g otiation is enabled, the module negotiates a s a 10 0 Mbps full -duplex device. ...
-
Black Box LMC5114C-R3 - page 16
Chapter 5: Operation Page 16 724-746-5500 | blackbox.com LMC5022C-R3 5. Operation 5.1 LED Operation Each L2 module features diagno stic LE Ds that provide information on features and ports. Upgrade LED Stacks Upper Function State FEF Fiber Far End Fault ON Green TXLL TX LinkLoss/B link if Active ON Green LNK FiberLink is valid/Flash on Activity ON ...
-
Black Box LMC5114C-R3 - page 17
Chapter 6: Troubleshooting LMC5022C-R3 724-746-5500 | blackbox.com Page 17 6. Troubleshooting • During installation, first test the fiber and twisted pai r connections with all troubleshooting features disabl ed, t hen enable these features, if desired, just before final installation. This w ill reduce the features ’ interference with testing. ...
-
Black Box LMC5114C-R3 - page 18
Chapter 7: Contacting Black Box Page 18 724-746-5500 | blackbox.com LMC5022C-R3 7. Contacting Black Box Black Box Customer Service Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Free technical support, 24 hours a day , 7 days a we ek. Call: 724-746-550 0 or Fax: 724-746-0746 Mail order: Black Box Corporation 1000 Pa ...
-
Black Box LMC5114C-R3 - page 19
Chapter 8: Fiber Optic Cleaning & ESD Precautions LMC5022C-R3 724-746-5500 | blackbox.com Page 19 8. Fiber Optic Cleaning Guidelines Fiber Optic transmitters and receiv ers are extremely susceptible to contamination by particles of dirt or dust, which can o bstruct the optic path and cause performance degra dation. Good system performance requi ...
-
Black Box LMC5114C-R3 - page 20
LMC5022C-R3, Rev. 1 50-80921BB-01 Rev A0 ...
¿Tienes una pregunta acerca de Black Box LMC5114C-R3?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Black Box LMC5114C-R3, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Black Box LMC5114C-R3 probablemente compartirá una forma de solucionarlo.