-
Westinghouse WHI-5S - page 1
WIRELESS INTERCOM SYSTEM 5-CHANNEL RADIO INTERCOM Models: WHDBI-5C (One Console & One Doorbell) WHI-5S (One Console) Installation & Operation Instructions Doorbell Console (760) 438-7000 • FAX (760) 438-7043 USA & Canada (800) 421-1587 & (800) 392-0123 Toll Free FAX (800) 468-1340 www.linearcorp.com PRINTER’S INSTRUCTIONS: INSTR ...
-
Westinghouse WHI-5S - page 2
T ABLE OF CONTENTS CONSOLE DESCRIPTION The 5-channel Wireless Intercom Consoles provide a wireless audio communication link between up to five Console stations and one or two remote Wireless Doorbell Intercom units. The intercom uses digital signals to control the stations called and provide a unique “house code” that prevents other nearby inte ...
-
Westinghouse WHI-5S - page 3
1 CONSOLE FEA TURES 1. ST A TION INDICA TORS Indicators light when a station number button is pressed to sho w the station that will be called. Indicators light to show who called or a call in progress. Indicators fl ash during conv ersation to show the busy stations. 2. ST A TION BUTT ONS Press a button to select the intercom station to be called ...
-
Westinghouse WHI-5S - page 4
2 DOORBELL FEA TURES 1. MICROPHONE High-gain microphone monitors audio while the Doorbell’ s T ALK button is pressed. 2. SPEAKER Sounds audio from the intercom Console. V olume is adjustable with the volume control (see Item #6). 3. POWER INDICA TOR Lights to show that Doorbell power is on. Doorbell power automatically switches ON when T ALK butt ...
-
Westinghouse WHI-5S - page 5
3 FOR TABLE OR SHELF MOUNTING... FOR WALL MOUNTING... SWING ANTENNA ALL THE WAY UP POINT ANTENNA STRAIGHT UP FROM CASE SWING ANTENNA OUT FROM BOTTOM OF CASE PLUG IN CONSOLE(S) TRANSFORMER CONNECT DOORBELL(S) BATTERIES CONSOLE DOORBELL LABELS ARE SUPPLIED TO IDENTIFY STATION LOCATIONS FACTORY SETTING: CONSOLE STATION #1 DOORBELL STATION #5 1 PREPARE ...
-
Westinghouse WHI-5S - page 6
4 W ALL MOUNTING THE DOORBELL 214601 C - IMAGE 6 3 1 2 4 USE MOUNTING PLATE AND PENCIL TO MARK SCREW LOCATIONS ATTACH MOUNTING PLATE USING THE SCREWS PROVIDED TILT DOORBELL INTO MOUNTING PLATE SECURE DOORBELL TO MOUNTING PLATE WITH THE CASE LOCKING SCREW NOTE: WAIT UNTIL AFTER ADJUSTING THE DOORBELL AUDIO VOLUME BEFORE FULLY TIGHTENING THE LOCKING ...
-
Westinghouse WHI-5S - page 7
5 214601 C - IMAGE 7 ROUTE TRANSFORMER WIRE INTO WIRING SLOT MOUNT CONSOLE ON WALL SCREWS MARK SCREW LOCATIONS AND DRIVE IN SCREWS LEAVING HEADS ABOUT 1/4" OUT NOTE: DO NOT MOUNT THE CONSOLE OUTDOORS, OR WHERE IT WILL BE EXPOSED TO EXCESSIVE MOISTURE, DUST, OR IN DIRECT SUNLIGHT LEFT SCREW RIGHT SCREW W ALL MOUNTING THE CONSOLE ...
-
Westinghouse WHI-5S - page 8
6 OPERA TING THE DOORBELL & CONSOLE 214601 C - IMAGE 8 3 1 2 4 THE VISITOR PRESSES THE DOORBELL-TALK BUTTON NOTE: THE CONSOLE POWER MUST BE ON, AND THE VOLUME MUST BE SET ABOVE MINIMUM THE VISITOR MAKES THE CALL CONSOLE ANNOUNCES THE VISITOR SEE THE VISITOR'S LOCATION HAVE THE CONVERSATION RESPOND TO THE VISITOR BY PRESSING & HOLDING T ...
-
Westinghouse WHI-5S - page 9
7 214601 C - IMAGE 9 OPERA TING MULTIPLE CONSOLES 3 1 2 4 CALLING ONE CONSOLE FROM ANOTHER CONSOLE WITH CONSOLE POWER ON, PRESS THE BUTTON FOR THE CONSOLE THAT YOU WANT TO CALL (DOORBELLS CAN NOT BE CALLED) CHOOSE WHOM TO CALL MAKE THE CALL PRESS AND HOLD THE TALK BUTTON, WAIT FOR THE BEEP , THEN SPEAK TOWARDS THE CONSOLE RELEASE THE TALK BUTTON WH ...
-
Westinghouse WHI-5S - page 10
8 CALLING MULTIPLE CONSOLES 214601 C - IMAGE 10 3 1 2 CALLING ALL CONSOLES CHOOSE STATION ALL-CALL HOLD THE ALL CALL BUTTON, WAIT FOR THE BEEP. SPEAK TOWARDS THE CONSOLE RELEASE THE ALL CALL BUTTON WHEN YOU ARE FINISHED TALKING NOTE: ANY CONSOLE WITH ITS MUTE SWITCH ON AND ANY DOORBELL UNITS THAT HAVE NOT BEEN USED IN THE PRIOR 60 SECONDS WILL NOT ...
-
Westinghouse WHI-5S - page 11
9 ADJUSTING THE DOORBELL ’S VOLUME 214601 C - IMAGE 11 LOW DOORBELL VOLUME HAVE SOMEONE TALK TO THE DOORBELL FROM THE CONSOLE WHILE ADJUSTING THE DOORBELL'S VOLUME HIGH THE DOORBELL'S VOLUME CAN BE ADJUSTED TO SUIT THE INSTALLATION USE A SMALL SCREWDRIVER TO ADJUST THE VOLUME CONTROL ...
-
Westinghouse WHI-5S - page 12
10 CHANGING A CONSOLE’S SETTINGS 214601 C - IMAGE 12 3 1 2 THE FACTORY SETTING FOR THE FREQUENCY SWITCH IS " A ", SET THE FREQUENCY SWITCHES TO MATCH ON ALL CONSOLES (ALL EITHER " A " OR " B ") 1. START WITH THE POWER OFF (VOLUME KNOB OFF) 2. PRESS & HOLD DOWN " ALL CALL " & " TALK " BUTTO ...
-
Westinghouse WHI-5S - page 13
11 CHANGING A DOORBELL ’S SETTINGS 214601 C - IMAGE 13 1. BE SURE THE GREEN POWER LIGHT IS OFF (IF THE LIGHT IS ON, WAIT ABOUT 2 MINUTES) 2. USE AN OBJECT TO PRESS AND HOLD THE PROGRAM BUTTON UNTIL A BEEP SOUNDS 3. RELEASE THE PROGRAM BUTTON (BE READY TO COUNT BEEPS) 4. THE DOORBELL WILL BEEP, COUNTING THE EXISTING HOUSE CODE NUMBER PROGRAM BUTTO ...
-
Westinghouse WHI-5S - page 14
12 TROUBLESHOOTING SYMPT OM REMED Y POWER INDICA TOR WILL NO T LIGHT BE SURE THE CONSOLE TRANSFORMER IS PLUGGED INT O AN UN-SWITCHED OUTLET BE SURE THE DOORBELL UNIT HAS FRESH 9-V OL T ALKALINE BA TTERIES EXCESSIVE HUM FROM THE SPEAKER KEEP CONSOLE A W A Y FROM FLUORESCENT LIGHTS MO VE DOORBELL UNIT IF IT IS NEAR AN AC LINE SYSTEM F AILS T O WORK A ...
-
Westinghouse WHI-5S - page 15
13 IMPORT ANT FCC NOTICE Radio controls provide a reliable communications link and fill an important need in portable wireless signaling. However, there are some limitations which must be observed. • For U.S. installations only: The radios are required to comply with FCC Rules and Regulations as Part 15 and FRS Part 95 devices. As such, they have ...
-
Westinghouse WHI-5S - page 16
Copyright © 2003 Linear Corporation 214601 C 214601 C - IMAGE 16 ...
¿Tienes una pregunta acerca de Westinghouse WHI-5S?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Westinghouse WHI-5S, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Westinghouse WHI-5S probablemente compartirá una forma de solucionarlo.