Español dropdown-ico

Manual de instrucciones AirLive WH-9200AP

33 de páginas No relevante
Descargar

Pasar a la página of 33

Summary
  • AirLive WH-9200AP - page 1

    W H-9200AP 802.11a/b/g Dual Radio W ireless Base Station Use r ’ s Manual ...

  • AirLive WH-9200AP - page 2

    Regulatory Information Federal Communication Commission Interference S t atement This equipment has been tested and found to co mply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Ru les. These limits are designed to provide reasonable protection against harmful interference. This equi pment requires installation by a ...

  • AirLive WH-9200AP - page 3

    Table of Contents 1. Introduction ................................................................................................2 1.1 Overview ..............................................................................................2 1.2 Install ing WH-9200AP ..........................................................................2 1.2.1 P ...

  • AirLive WH-9200AP - page 4

    1. Introduction 1.1 Overview The WH-9200AP is a dream device for WISP to build their wireless networks. The WH-9200AP features 2 At heros that run in 5G Hz or 2.4GHz frequency band. There is an intergraded 802.3af POE port to let you run the WH-9200AP at up to 100 meter distance away from the power source. Dual Wireless + 2 LAN Ports The WH-9200AP ...

  • AirLive WH-9200AP - page 5

    1.2.1 Package Content The WH-9200AP package contai ns the following items: z One WH-9200AP main unit z 48VDC PoE injector kits z Pole/Wall mount kit z One CD of the WH-9200AP 1.2.2 Hardware Presentation 5 6 1 2 3 4 LED # Function Color Description 1 LAN - LAN port #2 2 WLAN1 LED Blue 3 WLAN2 LED Green No Connection: Off Low Signal: Flash per second ...

  • AirLive WH-9200AP - page 6

    WLAN port when operate in Gateway mode 5 Ground Pin - Reference point for electric current 6 Sluice - Sluice out the water in device N-T ype connector for outdoor antenna of Radio 2. 1 1b/g 2.4GHz N-T ype connector for outdoor antenna of Radio 1. 1 1a 5GHz AirLive WH-920 0AP User’ s Manual 4 ...

  • AirLive WH-9200AP - page 7

    Antenna 2 Antenna 2 Pole Mount/W all mount Installa tion 5 AirLive WH-9200AP User ’ s Manual ...

  • AirLive WH-9200AP - page 8

    Power Inst allation The following image shows the power installation of WH-9200AP . Note that WH-9200AP is IEEE802.3af compatible, you should use the packed kit or POE Switch for power injection. POE AirLive WH-920 0AP User’ s Manual 6 ...

  • AirLive WH-9200AP - page 9

    1.2.3 Configuration Setups The factory default settings of WH-9200AP are as following: Default V alue Settings Wireless1 Wireless2 Device Name WH-9200AP Radio 802.1 1a 802.1 1b/g SSID airlive1 airlive2 IP Address 192.168.1.1 DHCP Server Disabled. A vailable and def ault enabled when each of the wireless is configured as a gateway . DHCP IP Range 19 ...

  • AirLive WH-9200AP - page 10

    Access to management interface 1 Please make sure your computer IP is in the same subnet as the WH-9200AP (i.e. 192.168.1.x). 2 Please make sure your computer has wireless network adapter installed. 3 Open the web browser and enter http://192.168.1.1/. 4. Choose Wireless Settings to start. AirLive WH-920 0AP User’ s Manual 8 ...

  • AirLive WH-9200AP - page 11

    2. Wirless Settings 2.1 Client + AP Mode In this mode, the Radio1 will operate in 5G Hz 802.1 1a as Client mode while Radio2 will operate in 2.4GHz 802.1 1g/b as AP mode. The Radio1 operates in 5470~5725MHz, Radio2 operate in Channel 1~1 1 only . Client mode is also known as Ethernet Client. In this mode, the WH-9200 AP will act as a WLAN card to c ...

  • AirLive WH-9200AP - page 12

    T o connect to an access point, use the “Site Survey ” button to find the Access Point. The Site Survey pop up window then shows up and lists available access point with relative information. Select the access point you want to connect and then click the “ASSOCIA TE” button. Click here to show the signal strength of the selected access poin ...

  • AirLive WH-9200AP - page 13

    After the access point is selected, it s SSID s hows automatically in the Network ID (SSID) field. 11 AirLive WH-9 200AP User ’ s Manual 2.2 Wireless Security The wireless security is to configure a se cure connection between two wireless devices. WH-9200AP provides WEP , 802.1x, WP A, WP A-PSK, WP A2, WP A2-PSK, WP A-AUTO and WP A-PSK-AUTO secur ...

  • AirLive WH-9200AP - page 14

    WEP WEP allows you to use data encryption to secure your dat a from being eavesdropped by malicious people. It allows 3 types of key: 64 (WEP64), 128 (WEP128), and 152 (WEP152) bits. Y ou can configure up to 4 keys us ing either ASCII or Hexadecimal format. Key Settings: The length of a WEP64 key must be equal to 5 bytes, a WEP128 key is 13 bytes, ...

  • AirLive WH-9200AP - page 15

    Rekey interval is time period that the system will change the key periodically . The shorter the interval is, the better the security is. eneral you don’t have to change Port Number , which is After you have finished the configuration wizard, you have to configure the RADIUS Server IP and Shared Secret: If you have connect WH-9200AP to a RADIUS s ...

  • AirLive WH-9200AP - page 16

    Encryption T ype : There are two encryption types TKIP and CCMP (AES) . While CCMP provides better security than TKIP , some wirel ess client st ations may not be equipped with the hardware to support it. Y ou can select Both to allow TKIP clients and CCMP clients to connect to the Access Poin t at the same time. Group Rekey Interval : A group key ...

  • AirLive WH-9200AP - page 17

    Pre-shared Key : T his is an ASCII string with 8 to 63 characters. Please make sure that both the WH-9200AP and the wir eless client stations use the same key . Encryption T ype : There are two encryption types TKIP and CCMP (AES) . While CCMP provides better security than TKIP , some wirel ess client st ations may not be equipped with the hardware ...

  • AirLive WH-9200AP - page 18

    WP A2 WPA2 stands for Wi-Fi Protected Access 2. It provides stronger data protection and network access control then WPA. Only authorized users can access the wireless networks. Encryption T ype : There are two encryption types TKIP and CCMP (AES) . While CCMP provides better security than TKIP , some wirel ess client st ations may not be equipped ...

  • AirLive WH-9200AP - page 19

    WP A2-PSK Enter the Pre-shared Key to initiate WPA2 se curity. All devices try to access the network should have the matching encryption key. Pre-shared Key : T his is an ASCII string with 8 to 63 characters. Please make sure that both the WH-9200AP and the wir eless client stations use the same key . Encryption T ype : There are two encryption typ ...

  • AirLive WH-9200AP - page 20

    WP A-AUTO Encryption T ype : There are two encryption types TKIP and CCMP (AES) . While CCMP provides better security than TKIP , some wir eless client stations may not be equipped with the hardware to support it. Y ou can select Both to allow TKIP clients and CCMP clients to connect to the Access Poin t at the same time. Group Rekey Interval : A g ...

  • AirLive WH-9200AP - page 21

    WP A-PSK-AUTO WPA-PSK-AUTO tries to authenticate wirele ss clients using WPA-PSK or WPA2-PSK. Pre-shared Key : T his is an ASCII string with 8 to 63 characters. Please make sure that both the WH-9200AP and the wir eless client stations use the same key . Encryption T ype : There are two encryption types TKIP and CCMP (AES) . While CCMP provides bet ...

  • AirLive WH-9200AP - page 22

    2.3 Advanced Wireless Settings When click on Advanced Setup button under client mode, a pop- up window appears and show parameter as fo llow: Beacon Interval: The WH-9200AP broadcasts beacon frames regularly to announce its existence. The beacon Interval specifies how often beacon frames are transmitted in time unit of milliseconds. This function i ...

  • AirLive WH-9200AP - page 23

    power-conserving stations that there are p ackets waiting to be received by them. The DTIM interval specifies how often the beacon frame should cont ain DTIMs. User Limit ation: The range of user limitat ion is from 1 to 100. Age Out T imer: Set the age out time. The default is 300 sec. T ransmit Power: T ransmit power output depends upon t he size ...

  • AirLive WH-9200AP - page 24

    The ACK value then shows up after calculating Enter the calculated value of “AckTimeOut” into the appropriate “Ack T imeOut” field (1 1a or 1 1g) in the “Advanced Wireless Settings” window . Change the value from 25 to 107, where 107 is calculated value of distanced 12 500m. AirLive WH-920 0AP User’ s Manual 22 ...

  • AirLive WH-9200AP - page 25

    3. System Management Y ou can review the Device information of your WH-9200AP by the interface. The information shows the current firmware version, IP address of your WH-9200AP . Wireless1 MAC and Wireless2 MAC show the MAC address of the two radios, the information helps to setup WDS connection by remote access point. The Uptime records the live t ...

  • AirLive WH-9200AP - page 26

    3.2. System Management Settings The WH-9200AP allow you to change the parameter of manage the system. HTTP Port No.: This is to change the management web port of WH-9200AP . By default, the port number is 80 and we type http://192.168.1.1 in the browser to access the management web page. If we change the port to another , say , 90, then we need to ...

  • AirLive WH-9200AP - page 27

    Syslog server IP address: The Syslog can also send to the identified IP address. The system log shows in WH-9200AP: 25 AirLive WH-9 200AP User ’ s Manual ...

  • AirLive WH-9200AP - page 28

    3.3. SNMP Settings WH-9200AP can also be managed by remote software with SNMP (simple network management protocol) protocol. System Name: A name that you assign to your WH- 9200AP for SNMP software. It is an alphanumeric string of up to 30 characters. System Location: Enter a system location. Info rmation for SNMP software. System Cont act: Contact ...

  • AirLive WH-9200AP - page 29

    Community String For Write: For read-write operation, y ou need to configure a write “community string”. Assign a specific name and IP addr ess for your SNMP trap manager: A trap manager is a remote SNMP management station where special SNMP trap messages are generated (by the route r) and sent to in the network. You can define trap m anagers i ...

  • AirLive WH-9200AP - page 30

    3.4. Firmware Upgrade Y ou can upgrade the firmware of your WH-9200AP (the softwa re that controls your WH-9200AP’ s operation). Normally , this is done w hen a new version of firmware offers new features that you want, or solves probl ems that you have encount ered with the current version. System upgrade can be perform ed through the System Upg ...

  • AirLive WH-9200AP - page 31

    3.5. Configuration Save and Restore In this interface, you can backup your system configuration to PC and restore your saved configuration file to the WH-9200AP . T o save the configurati on to your PC, click the “SA V E T O FILE” button and the system will lead you to save the configuration file to your PC. T o restore configure file to WH-920 ...

  • AirLive WH-9200AP - page 32

    3.6. Reboot System The following interface allows you to reboot your WH-9200AP . Click “Y es” button to reboot. Y ou can also reboot WH-9200AP by power off and power on it. AirLive WH-920 0AP User’ s Manual 30 ...

  • AirLive WH-9200AP - page 33

    3.7. WH-9200AP Emergency Recovery This document guides to recover your WH -9200AP system if t he firmware crashed. 1. Download t he t ftp server to your PC. In the following exampl e, we use t ftpd32: http://tf t pd32.jounin. net/t ftpd32_download.html . 2. Copy the tftpd32.exe of the downloaded file to C:. 3. Change the IP address of your PC to 1 ...

Fabricante AirLive Categoría Access Point

Los documentos del dispositivo AirLive WH-9200AP que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos AirLive
- manuales de instrucciones WH-9200AP
- hojas de producto AirLive
- folletos informativos
- o etiquetas energéticas AirLive WH-9200AP
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones AirLive WH-9200AP.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje AirLive WH-9200AP, instrucciones de servicio, instrucciones cortas o instrucciones de usuario AirLive WH-9200AP. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto AirLive WH-9200AP.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo AirLive WH-9200AP, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar AirLive WH-9200AP. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de AirLive WH-9200AP.

El manual de instrucciones completo de AirLive debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual AirLive WH-9200AP - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice AirLive WH-9200AP, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de AirLive WH-9200AP que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo AirLive WH-9200AP - que deben facilitarnos los primeros pasos durante el uso de AirLive WH-9200AP
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con AirLive WH-9200AP
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de AirLive WH-9200AP en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de AirLive WH-9200AP?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con AirLive WH-9200AP, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con AirLive WH-9200AP probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)