-
Pelican PL-673 - page 1
PL-673 Race ‘N Play W ireless Rev#100303 For PlayStation ® 2 PL-000 Race N Play Manual.qxd 10/3/03 2:37 PM Page 1 ...
-
Pelican PL-673 - page 2
T able of Contents Console Protection Guarantee .................. 1 Product Layout .......................................... 2 Overview ................................................... 5 Instructions For .......................................... 9 Race N Play Wireless Controller ........ 9 Race N Play Car & Charger ........... 12 T rouble ...
-
Pelican PL-673 - page 3
1. Console Protection Guarantee Pelican’s Console Protection Guarantee assures you of Pelican’s com- mitment to quality and customer satisfaction. The Protection Guarantee warrants the connection (the plug port of the video game console and the plug of the Pelican controller) between the controller and your video game console system., i.e., tha ...
-
Pelican PL-673 - page 4
2. Product Layout Race N Play Wireless Controller Directional Buttons SELECT Button Left Analog Stick/ L3 Button Fire Buttons START Button Right Analog Stick/ R3 Button ANALOG Mode Button Power LED PL-000 Race N Play Manual.qxd 10/3/03 2:37 PM Page 4 ...
-
Pelican PL-673 - page 5
3. Race N Play W ireless Receiver Unit CHANNEL Switch SIGNALLED L2 Button R2 Button R1 Button L1 Button ANALOG LED CHANNEL Switch Antenna Slot PL-000 Race N Play Manual.qxd 10/3/03 2:37 PM Page 5 ...
-
Pelican PL-673 - page 6
4. Race N Play Car Race N Play Car Charger Antenna PL-000 Race N Play Manual.qxd 10/3/03 2:37 PM Page 6 ...
-
Pelican PL-673 - page 7
5. Product Overview Race N Play Wireless Controller uses advanced RF technology which gives you the ability to play without the limitations of typical corded controllers while still giving you lightning fast control over your favorite game or even control the included RF car . There are a few switches, buttons, LED’ s (lights), and features not f ...
-
Pelican PL-673 - page 8
6. Mode LED / Analog Button: Press the Analog Button to switch modes. When the LED is red the controller is in analog mode, and when the LED is off the controller is in digital mode. The Mode LED is located on the Receiver Unit. Power LED: The Power LED will come on when you have the Race N Play Wireless switched into channel posi - tion 1, 2, or 3 ...
-
Pelican PL-673 - page 9
7. Battery Compartment: Race N Play Wireless requires the use of two AA batteries. There are two battery compartments on the Race N Play Wireless. One battery will go in each handle. Because of the battery location the vibration motors have been removed from Race N Play Wireless, meaning there is no vibra- tion function. Double check and make sure ...
-
Pelican PL-673 - page 10
8. Race N Play Car: Race N Play Wireless comes standard with a Micro RF Car that can be controlled using your Race N Play Controller . Race N Play Car Charger: A quick charger is also included to charge the Race N Play car . The charge time is approximat- ly 2 minutes and will last for 5 minutes of racing. High performance Antenna: Race N Play Wire ...
-
Pelican PL-673 - page 11
9. Instructions For Race N Play Wireless Controller 1. Make sure your PlayStation® 2 is turned off. 2. Remove the battery lids using the supplied screw driver and place 2 AA batteries (not includ- ed) into the Race N Play Wireless Controller . Make sure the batteries are inserted as shown in the battery compartment. 3. Select a Channel for the con ...
-
Pelican PL-673 - page 12
10. 4. Make sure the Receiver channel is set to the same channel as the controller . This is important, if the channels don’t match on both the controller and the receiver there will be no communication and the product will not function. Note: If you are using more than one Race N Play Wireless Controller you must use different channel settings, ...
-
Pelican PL-673 - page 13
11. 5. Plug your new Race N Play Receiver Unit into controller port one. If you already have a con- troller and want to use Race N Play Wireless as a second controller, make sure you have a con- troller plugged into controller port one and plug the Receiver Unit into controller port two. 6. Insert a game into your PlayStation® 2 and turn the syste ...
-
Pelican PL-673 - page 14
12. Instructions For Race N Play Car & Charger 1. Make sure your PlayStation® 2 is turned off. 2. Remove the battery lids using the supplied screw driver and place 2 AA batteries (not includ - ed) into the Race N Play Wireless controller . Make sure the batteries are inserted as shown in the battery compartment. Remove screw with supplied scre ...
-
Pelican PL-673 - page 15
13. 3. Set the Channel Switch to the Car position. The switch should be all the way to the right most position. 4. Connect the supplied High Performance Antenna to the Race N Play controller . The antenna will screw in clock wise. 5. Remove the battery lid for the Race N Play Car Charger and properly insert the batteries. PL-000 Race N Play Manual. ...
-
Pelican PL-673 - page 16
14. 6. Place the Race N Play Car on the Charger and let it charge for approximately two minutes. 7. Remove the Race N Play Car from the charg- er . Y ou are now ready to let the racing begin. Once the battery on the Race N Play Car gets low you can just simply place it back on the charger and let it charge for another two minutes. PL-000 Race N Pla ...
-
Pelican PL-673 - page 17
15. T rouble Shooting For Race N Play Wireless Controller If you are having difficulties with your new Race N Play Wireless Controller please refer below: The Vibration function is not working on my new Race N Play W ireless controller. 1. Race N Play Wireless does not support Vibration because the controller is very compact, eliminating the bulk c ...
-
Pelican PL-673 - page 18
16. My Race N Play Wireless does not seem to operate properly and is losing connection with the Receiver . 1. It is quite normal to have interference from other devices in your home such as cell phones, cordless phones, wireless networks, or even microwaves. Because of this Race N Play Wireless has three different channels / frequencies to choose f ...
-
Pelican PL-673 - page 19
17. T rouble Shooting For Race N Play Car My Race N Play Car does not seem to operate properly or does not respond to the Race N Play Wireless Controller . 1. Check to verify the the Race N Play Wireless Controller is set to the “Car” position on the channel switch. 2. Check to verify that your batteries are inserted correctly into your Race N ...
-
Pelican PL-673 - page 20
18. W arranty Card Pelican warrants to the original consumer purchaser that the product will be free from defects in materials and / or workmanship for a period of 5 years from the date of purchase. If a defect covered by this warranty occurs during this period, Pelican at its option will repair or replace, at no charge, any part that Pelican deter ...
-
Pelican PL-673 - page 21
Changes or modifications not expressly approved by the manufacturer could void the user's author - ity to operate the equipment. This device com- plies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference receive ...
-
Pelican PL-673 - page 22
1840 East 27th Street V ernon, CA 90058 USA http://www .pelicanperformance.com ® ® PL-000 Race N Play Manual.qxd 10/3/03 2:37 PM Page 22 ...
¿Tienes una pregunta acerca de Pelican PL-673?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Pelican PL-673, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Pelican PL-673 probablemente compartirá una forma de solucionarlo.