-
Bose 131 - page 1
The Bose ® 131 TM Marine Speaker System Owner’ s Guide October 30, 2001 AM188201_02_V .pdf ...
-
Bose 131 - page 2
2 October 30, 2001 AM188201_02_V .pdf Safety , W arranty , and T echnical Information Please r ead this owner’ s guide The Bose ® 131 TM marine speaker system is engineer ed to provide sound quality far beyond other marine speaker systems. This guide helps you install and use your speaker system pr operly . Please read the installation section c ...
-
Bose 131 - page 3
AM188201_02_V.pdf October 30, 2001 3 Contents/Records Bose B.V. Nijverheidstraat 8, 1135 GE Edam The Netherlands Anton Schalkamp General Manager, Bose Europe Manufacturer’s authorized EU representative 23 January 1997 Kind of equipment: Loudspeaker T ype designation: 131™ marine speaker system in accordance with EMC Directive 89/336/EEC and Art ...
-
Bose 131 - page 4
4 October 30, 2001 AM188201_02_V .pdf T ools r equir ed Y ou will need the following tools to complete this installation: • Phillips-head screwdriver . • An appropriate cutting tool for the surface to be cut. For installation in fiber glass or wood, we recommend a sabr e saw . Use a shor t blade, and have some extra blades available. A hole saw ...
-
Bose 131 - page 5
AM188201_02_V.pdf October 30, 2001 5 Figure 2 Selecting the right locations A. Mount from the rear if you can inser t the speaker enclo- sure behind the bulkhead mounting sur face. B. Mount from the front if you cannot reach behind the mounting sur face. If you are uncertain about the depth and clearance behind your mount- ing surface, consult your ...
-
Bose 131 - page 6
6 October 30, 2001 AM188201_02_V .pdf T est the speakers It is a good idea to test your system befor e installation. With the power tur ned off, connect the receiver to the speakers. The provided speaker cor d consists of two insulated wires; one is marked or ribbed, and is always positive (+). The plain wire is always negative (–). The wir es co ...
-
Bose 131 - page 7
AM188201_02_V.pdf October 30, 2001 7 Installing Y our Speakers Fr om The Rear Of The Bulkhead A Drill a starter hole that is large enough for your sabre saw blade. Be sur e to drill inside and close to the line you have marked. Installation fr om the rear of the bulkhead A 4 Choose the 5 3 ⁄ 8 inch (13.6 cm) diameter hole size if you can comforta ...
-
Bose 131 - page 8
8 October 30, 2001 AM188201_02_V .pdf Hold the speaker enclosure up to the hole from behind the bulkhead and find the best position for the extended portion of the enclosure. Be sur e the enclosure is hidden behind the bulkhead. If the enclosure does not fit, use the file or rasp to enlar ge the hole. Use a half-round file or wood rasp to smooth ou ...
-
Bose 131 - page 9
AM188201_02_V.pdf October 30, 2001 9 Drill the marked holes using a 1 ⁄ 8 inch (.32 cm) bit. Use a center punch to make a slight indentation for your drill bit. This will keep the drill bit from “walking” away from the mark you have made. Installing Y our Speakers Fr om The Rear Of The Bulkhead Mark six screw holes. Use the smallest hole patt ...
-
Bose 131 - page 10
10 October 30, 2001 AM188201_02_V .pdf Connect the speakers. Be sur e the receiver or amplifier is turned OFF . If possible, disconnect the power source. Use the supplied silicone-filled wir e nuts to secure the ends of each wir e pair . Place the stripped end of the positive (+) right channel r eceiver wir e together with the stripped end of the p ...
-
Bose 131 - page 11
AM188201_02_V.pdf October 30, 2001 1 1 Snap the grille in place on the mounting flange. No hardwar e is needed to secure this part. Y ou are now finished with the assembly . Enjoy your music system! Place the template over the area wher e the speaker is to be located. The round outer edge shows how much room to allow for the grille. The long end is ...
-
Bose 131 - page 12
12 October 30, 2001 AM188201_02_V .pdf Use a half-round file or wood rasp to smooth out any roughness in the speaker hole you have cut. Using the sabre saw , cut the hole for the speaker , carefully staying just inside the line. T ake your time; you want a smooth edged circular hole. B 4 Installing Y our Speakers Fr om The Front Of The Bulkhead Dri ...
-
Bose 131 - page 13
AM188201_02_V.pdf October 30, 2001 1 3 Connect the speakers. Be sure the r eceiver or amplifier is turned OFF . If possible, disconnect the power source. Use the supplied silicone-filled wire nuts to secur e the ends of each wire pair . Place the stripped end of the positive (+) right channel receiver wir e together with the stripped end of the pos ...
-
Bose 131 - page 14
14 October 30, 2001 AM188201_02_V .pdf Remove the speaker enclosure. Tie a knot in each joined wir e pair to pr otect the connection from being pulled apar t. Installing Y our Speakers Fr om The Front Of The Bulkhead B 10 Reinsert the speaker enclosure. Note: For added protection against water enter - ing the bulkhead, you can apply a generic silic ...
-
Bose 131 - page 15
AM188201_02_V.pdf October 30, 2001 1 5 Finally , snap on the grille to the mounting flange. No hardwar e is needed to secure this part. Y ou are now finished with the assembly . Enjoy your music system! Install six screws, if possible. Y ou need at least three screws installed and equally spaced. Remove the perforated speaker cone shields fr om the ...
-
Bose 131 - page 16
16 October 30, 2001 AM188201_02_V .pdf Pr oblem What to do • Make sur e the boat’ s receiver is turned ON. • Make sur e the power supply of the boat is connected and adequately char ged. • Make sur e the receiver is not set to MUTE. • Refer to the owner’ s guide that came with your receiver . • Check connections to both the speakers a ...
-
Bose 131 - page 17
AM188201_02_V.pdf October 30, 2001 1 7 Bose ® Corporation Italia Bose S.p.A., Via della Magliana 876 00148 Roma www .bose.iT TEL 06-65670802 F AX 06-65680167 Japan Bose K.K., Shibuya YT Building 28-3 Maruyama-cho Shibuya-ku, T okyo 150 TEL 3-5489-0955 F AX 3-5489-0592 Nederland Bose B.V ., Nijverheidstraat 8 1135 GE Edam TEL 0299-390111 F AX 0299- ...
-
Bose 131 - page 18
©2000 Bose Corporation The Mountain, Framingham, MA 01701-9168 USA 188201 AM Rev.02 JN97843 ...
¿Tienes una pregunta acerca de Bose 131?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Bose 131, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Bose 131 probablemente compartirá una forma de solucionarlo.