-
Harman-Kardon MAS 100 - page 1
MAS 100/ MAS 110 MUSIC SYSTEM OWNER’S MANUAL ...
-
Harman-Kardon MAS 100 - page 2
2 SAFETY INFORMATION 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such a ...
-
Harman-Kardon MAS 100 - page 3
3 English 2 SAFETY INFORMATION 4 INTRODUCTION AND FEATURES 4 SUPPLIED ACCESSORIES 5 FRONT- PANEL CONTROLS ( c ontroller and amplifier ) 6 REAR - PANEL CONNECTIONS ( c ontroller ) 7 REAR - PANEL CONNECTIONS ( a mplifier ) 8 RE MOTE CON TROL FUNC TION S 10 INSTALLATION 12 OPERATION 12 Using the Remote Control 12 Turning On the MAS 100/MAS 110 12 Sett ...
-
Harman-Kardon MAS 100 - page 4
4 • The Bridge II dock for iPod (included with some versions of MAS 110 system, optional for other models) charges iPod touch 2nd generation, iPod nano 4th generation, iPod classic, iPod touch 1st generation, iPod nano 3rd generation, iPod nano 2nd generation, iPod 5th generation. iPod not included. • Slot-loaded CD player with CD, CD-R, CD-RW, ...
-
Harman-Kardon MAS 100 - page 5
5 English FRONT-PANEL CONTROLS CONTROLLER AND AMPLIFIER Note: Controls are the same for all models. The MAS 100 and MAS 110 use touch-sensitive controls. To use a control, tap gently on its lit icon. NOTE: Controls are the same for all models. Power: Turns the MAS 100/MAS 110 on or places it in Standby mode. To completely power off the unit, unplug ...
-
Harman-Kardon MAS 100 - page 6
6 REAR-PANEL CONNECTIONS CONTROLLER FM Antenna Terminal: Connect the included FM antenna wire here. DA B Ant enna Te rmin al (M AS 11 0 Onl y): Co nnec t the incl uded DAB ante nna wire lead here to enjoy pr ogrammin g from digital DAB, DAB+ or T-DMB-Audio radio stations available in your area. USB Port B: Connect a compatible USB device here to en ...
-
Harman-Kardon MAS 100 - page 7
7 English REAR-PANEL CONNECTIONS AMPLIFIER Right and Left Speaker Output Terminals: Use two-conductor speaker wire to connect each set of terminals to the correct speaker. Remember to observe the correct polarity (positive and negative con- nections). Input From Controller: Connect the included ribbon cable to this connector and to the correspondin ...
-
Harman-Kardon MAS 100 - page 8
8 REMOTE CONTROL FUNCTIONS Power: Turns the MAS 100/MAS 110 on or off. To completely power off the unit, unplug the power supply. Sleep: Each press increases the time until turn-off, from 10 to 90 minutes, in increments of 10 minutes. The next press after the 90 min- utes setting turns off the Sleep function. Source Selectors: Selects a source inpu ...
-
Harman-Kardon MAS 100 - page 9
9 English REMOTE CONTROL FUNCTIONS Preset/Folder +/–: Selects a preset station or folder on a USB or data CD. • Radio: Each press changes to the next or previous preset station, if any have been programmed. • USB or Data CD: Press once to open the current folder.Each additional press changes to the next or previous folder. After 3 sec- onds, ...
-
Harman-Kardon MAS 100 - page 10
10 INSTALLATION Figure 1: Docking an iPod in The Bridge II The Bridge II Insert iPod Model NANO iPod nano, 1st and 2nd generations 5G (VIDEO 60GB) iPod, 5th generation (60GB, 80GB) and iPod classic (160GB) 5G (VIDEO 30GB) iPod, 5th generation (30GB) and iPod classic (80GB) 13 iPod nano, 3rd generation and 4th generation 12, 14 iPod touch – instal ...
-
Harman-Kardon MAS 100 - page 11
11 English INSTALLATION • If your device is a turntable with an MM-type cartridge, connect its outputs to the Phono (MM) Inputs on the rear panel of the controller. If it is another type of turntable, do not connect it to the MAS 100 or MAS 110 without using a separate phono preamp, available from electronics outlets. Do not connect a turntable t ...
-
Harman-Kardon MAS 100 - page 12
12 Using the MAS 100/MAS 110 is simple and intuitive. The front-panel controls use advanced touch-sensitive technology. To use the front panel, place a finger over any of the illuminated icons. A gentle tap is all that is necessary. Wait a few seconds for the system to process each command. To remove fingerprints, wipe the front panel with a dry mi ...
-
Harman-Kardon MAS 100 - page 13
13 English Figure 3: Setting the Alarms 3. Press the Enter Button to display “Alarm 1”. Use the 7 / 3 Buttons to display “Alarm 2”. When the desired alarm is displayed, press the Enter Button to set it. The “Weekday: On” message will appear. Use the 7 / 3 Buttons to display the Weekday Time, Weekend On/ Off, Weekend Time or Source Setti ...
-
Harman-Kardon MAS 100 - page 14
14 OPERATION ◆ ◆ To change the Snooze setting, press the Enter Button. Use the 7 / 3 Buttons to change how long play will be paused: 5, 10, 15, 20, 25 or 30 minutes. Press the Enter Button to save the change. Volume Level: With “Alarm 1” in the Message Display, press the 7 / 3 Buttons until “Level” appears. This setting only affects pla ...
-
Harman-Kardon MAS 100 - page 15
15 English OPERATION Settings Speaker Setup Right Enter Enter or Back Left > Speaker Setup Bass > Speaker Setup T r e b l e > < Speaker Setup Balance < Set T reble 00dB > < Set Bass 00dB > < Enter Enter or Back Enter Enter or Back Enter Enter or Back Right Left Set Balance Centre < > Figure 4: Speaker Setup Settings ...
-
Harman-Kardon MAS 100 - page 16
16 OPERATION Use the Numeric Keys to directly access a track. If the disc is organized into folders, press the Folder +/– Buttons to open a folder. Additional presses skip to the next or previous folder. Within a folder you may search through the tracks more quickly by pressing the +10 and –10 Numeric Keys. USB The MAS 100/MAS 110 is equipped w ...
-
Harman-Kardon MAS 100 - page 17
17 English OPERATION AUXILIARY INPUTS The MAS 100/MAS 110 is equipped with three analog audio inputs, a phono input (MM type) and four digital audio inputs. If you have connect- ed a compatible device, such as a portable audio player or a cassette deck, select the corresponding auxiliary input as the source and use the device’s own controls. To s ...
-
Harman-Kardon MAS 100 - page 18
18 TEChNICAL SPECIFICATIONS TROUBLESHOOTING GUIDE SYMPTOM Unit does not function when Power On Switch is pressed. Display lights, but there’s no sound. There is sound on only one side, or the sound is distorted. The MAS 100/MAS 110 does not respond to remote commands. The tuner is buzzing intermittently • Make sure the AC power cord is securely ...
-
Harman-Kardon MAS 100 - page 19
19 English SYSTEM: Power output: 65 watts per channel, 20Hz – 20kHz, THD <0.07%, into 6 ohms, both channels driven Bandwidth: 20Hz – 35kHz, –3dB System frequency response: 20Hz – 20kHz, ±0.5dB Signal-to-noise ratio, A-weighted: 90dB (Analog inputs), 96dB (Digital inputs) Channel separation: ≤ 65dB Crosstalk between sources: ≤ 70dB L ...
-
Harman-Kardon MAS 100 - page 20
8500 Balboa Boulevard, Northridge, CA 91329 USA www.harmankardon.com © 2009 Harman International Industries, Incorporated. All rights reserved. Part No. 443369 ...
¿Tienes una pregunta acerca de Harman-Kardon MAS 100?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Harman-Kardon MAS 100, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Harman-Kardon MAS 100 probablemente compartirá una forma de solucionarlo.