-
DeWalt 7408 - page 1
Double Insulated Disc Grinder Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference. Model No. ______________________________________ Type ___________________________________________ Serial No. _______________________________________ IMP ...
-
DeWalt 7408 - page 2
2 GENERAL SAFETY RULES WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. WARNING: SOME DUST CREATED BY POWER SANDING, SAWING, GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES contains chemicals known to cause cancer, birth defects o ...
-
DeWalt 7408 - page 3
3 2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 3. Avoid accidental starting. Be sure switch is OFF before plugging in. Carrying tools with your finger on the switch or plugging in tools tha ...
-
DeWalt 7408 - page 4
4 SPECIFIC SAFETY RULES AND SYMBOLS 1. ALWAYS USE PROPER GUARD WITH GRINDING WHEEL. A guard protects operator from broken wheel fragments. 2 . ACCESSORIES MUST BE RATED FOR AT LEAST THE SPEED RECOMMENDED ON THE TOOL WARNING LABEL. Wheels and other accessories running over rated speed can fly apart and cause injury. 3 . HOLD TOOL BY INSULATED GRIPPI ...
-
DeWalt 7408 - page 5
5 ______ – – – – .......................... direct current n 0 .......................... no load .......................... alternating or direct current .......................... Class II Construction .......................... splash-proof construction .......................... watertight construction …/min .......................... ...
-
DeWalt 7408 - page 6
6 9. AT THE END OF EACH WORK SESSION put the paint chips and debris in a double plastic bag, close it with tape or twist ties and dispose of properly. 10. REMOVE PROTECTIVE CLOTHING and work shoes in the work area to avoid carrying dust into the rest of the dwelling. Wash work clothes separately. Wipe shoes off with a wet rag that is then washed wi ...
-
DeWalt 7408 - page 7
7 TO ST ART AND STOP THE MACHINE CAUTION: Make sure switch is OFF and power circuit voltage is the same as that shown on the specification plate. 1. Connect machine to power circuit. 2. Slide the switch button (A), Fig. 1, forward to turn tool “ON”. When released, the switch will return to the “OFF” position. 3 . To lock the switch in the ? ...
-
DeWalt 7408 - page 8
8 TO INST ALL GRINDING WHEEL 1. CAUTION: DISCONNECT TOOL FROM POWER CIRCUIT. 2. Rest machine on its back with spindle facing up. 3. Install and adjust the appropriate wheel guard following instructions in TO INSTALL WHEEL GUARD Section of this manual. 4. Position inner flange (A) Fig. 5, onto spindle (C), with round hub facing outward, away from ma ...
-
DeWalt 7408 - page 9
9 MAINTENANCE KEEP TOOL CLEAN Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material. CAUTION: Wear safety glasses while using compressed air. F AILURE TO ST ART Should your to ...
-
DeWalt 7408 - page 10
10 SERVICE AND REP AIRS All quality tools will eventually require servicing or replacement of parts due to wear from normal use. These operations, including brush inspection and replacement, should ONLY be performed by either an AUTHORIZED PORTER-CABLE SERVICE STATION or a PORTER-CABLE/DELTA SERVICE CENTER. All repairs made by these agencies are fu ...
-
DeWalt 7408 - page 11
11 NOTES 901397 - 09-30-01.qxd 2/13/02 2:12 PM Page 11 ...
-
DeWalt 7408 - page 12
12 PORTER-CABLE LIMITED ONE YEAR WARRANTY Porter-Cable warrants its Professional Power Tools for a period of one year from the date of original purchase. We will repair or replace at our option, any part or parts of the product and accessories covered under this warranty which, after examination, proves to be defective in workmanship or material du ...
-
DeWalt 7408 - page 13
The following are trademarks of PORTER-CABLE • DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marques suivantes sont des marques de fabriquant de la PORTER-CABLE • DELTA): BAMMER ® , LASERLOC ® , OMNIJIG ® , POCKET CUTTER ® , PORTA-BAND ® , PORTA-PLANE ® , PORTER-CABLE ® , QUICKSAND ® , SANDTRAP ® , S ...
¿Tienes una pregunta acerca de DeWalt 7408?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con DeWalt 7408, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con DeWalt 7408 probablemente compartirá una forma de solucionarlo.