-
Integra DTR-5.9 - page 1
DTR-5.9 Instr uction Manual AV Receiv er DTR-5.9_En.book Page 1 Tuesday, April 15, 2008 9:53 AM ...
-
Integra DTR-5.9 - page 2
2 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follo w all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any v entilation openings. Install in accordance with the manufacturer’ s instructions. 8. Do not install near an y heat ...
-
Integra DTR-5.9 - page 3
3 Precautions 1. Recording Copyright —Unless it’ s for personal use only , recording copyrighted material is illegal with- out the permission of the copyright holder . 2. A C Fuse —The A C fuse inside the unit is not user - serviceable. If you cannot turn on the unit, contact the dealer . 3. Care —Occasionally you should dust the unit all o ...
-
Integra DTR-5.9 - page 4
4 Supplied Accessories Make sure you ha ve the follo wing accessories: * In catalogs and on packaging, the letter at the end of the product name indicates the color . Specifications and operation are the same regardless of color . Contents Important Safety Instructions ........................... 2 Supplied Accessories ............................ ...
-
Integra DTR-5.9 - page 5
5 Contents —Continued Playing Your AV Components ...................... 48 Basic AV Receiver Operation ............................... 48 Common Functions ........................................ 49 Setting the Display Brightness .............................. 49 Muting the AV Receiver ....................................... 49 Using the Sleep Ti ...
-
Integra DTR-5.9 - page 6
6 Features Amplifier • 7-channel amplifier • 90 W atts/Channel @ 8 ohms (FTC) • WRA T -W ide Range Amplifier T echnology (5Hz–100kHz bandwidth) • Optimum Gain V olume Circuitry Processing • HDMI V ideo Upscaling (Up to 1080i) • HDMI V ideo Upcon version • Dolby T rueHD *1 • DTS-HD Master Audio *2 •F aroudja DCDi Edge Enhancem ...
-
Integra DTR-5.9 - page 7
7 Multir oom Capability Y ou can use two speaker systems with this A V recei ver —a surround-sound speaker system (up to 7.1 channels) in your main listening room, a stereo speaker system in a second room, or Zone 2, as we call it. And, you can select a dif- ferent audio source for each room. Main Room: In your main listening room, you can enjoy ...
-
Integra DTR-5.9 - page 8
8 Getting to Kno w the A V Receiver The actual front panel has various logos printed on it. They are not sho wn here for clarity . The page numbers in parentheses show where you can find the main e xplanation for each item. A On/Standby b utton (38) Sets the A V receiver to On or Standby . B Standby indicator (38) Lights up when the A V receiver i ...
-
Integra DTR-5.9 - page 9
9 Getting to Know the A V Receiver —Continued J Memory button (55) Used when storing or deleting radio presets. K T uning Mode button (53) Selects the Auto or Manual tuning mode for AM and FM radio. L Display b utton (50) Displays various information about the currently selected input source. M Setup button Opens and closes the onscreen setup men ...
-
Integra DTR-5.9 - page 10
10 Getting to Know the A V Receiver —Continued A DIGIT AL IN CO AXIAL 1 and 2 These coaxial digital audio inputs are for connect- ing components with a coaxial digital audio output, such as a CD player or D VD player . They’ re assign- able, which means you can assign each one to an input selector to suit your setup. See “Digital Input Setup? ...
-
Integra DTR-5.9 - page 11
11 Getting to Know the A V Receiver —Continued E ETHERNET This port is for connecting the A V receiver to home automation equipment and external controllers. Use only shielded Ethernet cables. F MONIT OR OUT The S-V ideo or composite video jack should be connected to a video input on your TV or projector . G SIRIUS antenna (on North American mode ...
-
Integra DTR-5.9 - page 12
12 Remote Contr oller For detailed information, see the pages in parentheses. A On/Standby b utton (38) Sets the A V receiv er to On or Standby . B Remote Mode/Input Selector buttons (48, 102–108) Selects the remote controller modes and the input sources. C Multi CH button (48) Selects the multichannel D VD input. D Arro w [ ]/[ ]/[ ]/[ ] and Ent ...
-
Integra DTR-5.9 - page 13
13 Remote Controller —Continued Notes: • If the remote controller doesn’t w ork reliably , try replacing the batteries. • Don’t mix ne w and old batteries or different types of batteries. • If you intend not to use the remote controller for a long time, remov e the batteries to prev ent damage from leakage or corrosion. • Expired batt ...
-
Integra DTR-5.9 - page 14
14 Connecting Y our Speaker s Thanks to the A V receiver’ s superb capabilities, you can enjoy surround sound with a real sense of mov ement in your own home—just lik e being in a movie theater or concert hall. Y ou can enjoy D VDs featuring Dolby Digital or DTS. W ith analog or digital TV , you can enjoy Dolby Pro Logic IIx, DTS Neo:6, or Onky ...
-
Integra DTR-5.9 - page 15
15 Connecting Y our Speakers —Continued Speaker Configuration For 7.1-channel surround-sound playback, you need sev en speakers and a po wered subwoofer . The following table sho ws which channels you should use based on the number of speakers you ha ve. * If you’ re using only one surround back speaker , connect it to the SURR B ACK L termina ...
-
Integra DTR-5.9 - page 16
16 Connecting Y our Speakers —Continued Speaker Connection Precautions Read the following before connecting your speak ers: • North American models: Y ou can connect speakers with an impedance of between 6 and 16 ohms. If you use speakers with a lo wer impedance, and use the amplifier at high volume le vels for a long period of time, the built ...
-
Integra DTR-5.9 - page 17
17 Connecting Y our Speakers —Continued Connecting the Speaker Cables The following illustration sho ws which speaker should be connected to each pair of terminals. If you’ re using only one surround back speaker , connect it to the left (L) SURR B A CK SPEAKERS terminals. 1 Strip about 5/8" (15 mm) of insulation from the ends of the speak ...
-
Integra DTR-5.9 - page 18
18 Connecting Y our Speakers —Continued The FR ONT L/R and SURR B A CK L/R terminal posts can be used with front speakers and surround back speakers respecti vely , or bi-amped to provide separate tweeter and woofer feeds for front speakers, pro viding improv ed bass and treble performance. • When bi-amping is used, the A V receiver is able to ...
-
Integra DTR-5.9 - page 19
19 Connecting Antennas This section explains ho w to connect the supplied indoor FM antenna and AM loop antenna, and ho w to connect commercially av ailable outdoor FM and AM antennas. The A V receiver w on’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner . The supplied indoor FM antenna ...
-
Integra DTR-5.9 - page 20
20 Connecting Antennas —Continued If you cannot achiev e good reception with the supplied indoor FM antenna, try a commercially av ailable out- door FM antenna instead. Notes: • Outdoor FM antennas work best outside, b ut usable results can sometimes be obtained when installed in an attic or loft. •F or best results, install the outdoor FM an ...
-
Integra DTR-5.9 - page 21
21 Connecting Y our Components • Before making any A V connections, read the manuals supplied with your other A V components. • Don’t connect the po wer cord until you’ ve completed and double-checked all A V connections. Optical Digital Jacks The A V receiver’ s optical digital jacks have shutter -type cov ers that open when an optical p ...
-
Integra DTR-5.9 - page 22
22 Connecting Y our Components —Continued By connecting both the audio and video outputs of your D VD player and other A V components to the A V receiver, you can switch the audio and video signals simultaneously simply by changing the input source on the A V receiver. The A V receiver supports se veral connection formats for compatibility with a ...
-
Integra DTR-5.9 - page 23
23 Connecting Y our Components —Continued Video Connection Formats V ideo equipment can be connected to the A V receiv er by using any one of the follo wing video connection formats: composite video, S-V ideo, component video, or HDMI, the lat- ter offering the best picture quality . V ideo input signals flo w through the A V receiv er as shown, ...
-
Integra DTR-5.9 - page 24
24 Connecting Y our Components —Continued •W ith connection , you can listen to and record audio from your TV or listen in Zone 2. •T o enjoy Dolby Digital and DTS, use connection or . (T o record or listen in Zone 2 as well, use and , or and .) If your TV has no audio outputs, connect an audio output from your VCR or cable or satellite recei ...
-
Integra DTR-5.9 - page 25
25 Connecting Y our Components —Continued •W ith connection , you can listen to and record audio from a D VD or listen in Zone 2. •T o enjoy Dolby Digital and DTS, use connection or . (T o record or listen in Zone 2 as well, use and , or and .) • If your D VD player has main left and right outputs and multichannel left and right outputs, be ...
-
Integra DTR-5.9 - page 26
26 Connecting Y our Components —Continued Hooking Up the Multichannel Input If your D VD player supports multichannel audio formats such as D VD-Audio and SA CD, and it has a multichannel analog audio output, you can connect it to the A V receiver’ s multichannel input. Use a multichannel analog audio cable, or sev eral normal audio cables, to ...
-
Integra DTR-5.9 - page 27
27 Connecting Y our Components —Continued W ith this hookup, you can use the tuner in your VCR or D VR to listen to your fa vorite TV programs via the A V receiver, which is useful if your TV has no audio outputs. •W ith connection , you can listen to the VCR or D VR in Zone 2. •T o enjoy Dolby Digital and DTS, use connection or . (T o listen ...
-
Integra DTR-5.9 - page 28
28 Connecting Y our Components —Continued Notes: • The A V receiv er must be turned on for recording. Recording is not possible while it’ s on Standby . • If you want to record directly from your TV or another video source without going through the A V receiver , connect the audio and video outputs from your TV or other video component dire ...
-
Integra DTR-5.9 - page 29
29 Connecting Y our Components —Continued W ith this hookup, you can use your satellite or cable receiv er to listen to your fav orite TV programs via the A V receiver, which is useful if your TV has no audio outputs. •W ith connection , you can listen to and record audio from the video source or listen in Zone 2. •T o enjoy Dolby Digital and ...
-
Integra DTR-5.9 - page 30
30 Connecting Y our Components —Continued •W ith connection , you can listen to and record audio from your game console or listen in Zone 2. •T o enjoy Dolby Digital and DTS, use connection . (T o record or listen in Zone 2 as well, use and .) Connecting a Game Console Connection A V receiver Signal flow Game console Picture quality COMPONEN ...
-
Integra DTR-5.9 - page 31
31 Connecting Y our Components —Continued About HDMI Designed to meet the increased demands of digital TV , HDMI (High Definition Multimedia Interface) is a ne w digital interface standard for connecting TVs, projectors, DVD players, set-top box es, and other video components. Until now , sev eral separate video and audio cables hav e been requi ...
-
Integra DTR-5.9 - page 32
32 Connecting Y our Components —Continued If you hav e an HDMI-compatible player , you can connect it to the A V receiv er with an HDMI cable. ■ Video Signals Digital video signals receiv ed by the HDMI IN jacks are normally output by the HDMI OUT for display on your TV . Composite video, S-V ideo, and component video sources can be upcon v ert ...
-
Integra DTR-5.9 - page 33
33 Connecting Y our Components —Continued If you want to use a more po werful power amplifier and use the A V recei ver as a preamp, connect it to the PRE OUT jacks, and connect all speakers and the subwoofer to the po wer amplifier . If you ha ve a po wered subwoofer , connect it to this A V receiver’ s PRE OUT SUBWOOFER jack. Connecting a C ...
-
Integra DTR-5.9 - page 34
34 Connecting Y our Components —Continued ■ CD Play er or T urntable (MM) with Built-in Phono Preamp •W ith connection , you can listen to and record audio from the CD player or listen in Zone 2. •T o connect the CD player digitally , use connection or . (T o record or listen in Zone 2 as well, use and , or and .) ■ T urntable (MM) with n ...
-
Integra DTR-5.9 - page 35
35 Connecting Y our Components —Continued •W ith connection , you can play and record or listen in Zone 2. •T o connect the recorder digitally for playback, use connections and , or and . •T o connect the recorder digitally for recording, use connection . Connecting a Cassette, CDR, MiniDisc, or D A T Recorder Connection A V receiver Signal ...
-
Integra DTR-5.9 - page 36
36 Connecting Y our Components —Continued ■ If Y our iPod Supports Video: Connect your RI Dock’ s audio output jacks to the AV receiver’ s GAME/TV IN L/R jacks, and connect its video output jack to the A V receiver’ s GAME/TV IN V jack. If you hav e an Onkyo DS-A1 RI Dock, connect its video output jack to the A V receiv er’ s GAME/TV IN ...
-
Integra DTR-5.9 - page 37
37 Connecting Y our Components —Continued W ith (Remote Interactiv e), you can use the following special functions: Auto P o wer On/Standby When you start playback on a component connected via , if the A V receiver is on Standby , it will automatically turn on and select that component as the input source. Similarly , when the A V receiv er is se ...
-
Integra DTR-5.9 - page 38
38 T urning On the A V Receiver • Befor e connecting the power cord, connect all y our speakers and A V components. • Plug the end of the power cord into a suitable w all outlet. •T urning on the A V receiver may cause a momentary po wer surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug ...
-
Integra DTR-5.9 - page 39
39 Fir st Time Setup This section explains the settings that you need to make before using the A V recei ver for the very first time. W ith the supplied calibrated microphone, Audyssey 2EQ automatically determines the number of speakers con- nected, their size for purposes of bass management, optimum crossov er frequencies to the subwoofer (if pre ...
-
Integra DTR-5.9 - page 40
40 First Time Setup —Continued 2 Put the speaker setup micro- phone at measurement point 1 (page 39), and connect it to the Setup MIC jack. Notes: •F or all measurements, the micro- phone capsule should point directly at the ceiling. • If there’ s an obstacle between the microphone and any speaker , the automatic setup will not work cor - r ...
-
Integra DTR-5.9 - page 41
41 First Time Setup —Continued Note: • When the automatic speaker setup is complete, the Equalizer Settings (page 86) will be set to “ Audyssey . ” Error Messa ges While the automatic speaker setup is in progress, one of the following error messages may appear: ❏ Ambient noise is too high This message appears if the background noise is to ...
-
Integra DTR-5.9 - page 42
42 First Time Setup —Continued The right surround back speaker has been detected but the left surround back speak er hasn’t. There is a problem with a speaker . The speaker may be broken or the subwoofer may be emitting sound that is too high. The number of speakers detected on the second or third measurement was dif ferent to the number detect ...
-
Integra DTR-5.9 - page 43
43 First Time Setup —Continued If the impedance of any speaker is 4 ohms or more b ut less than 6, set the Speaker Impedance to 4 ohms. North American models do not support speakers with an impedance of less than 6 ohms. To use bi-amping, you must change the Speaker T ype setting. For hookup information, see page 18. Notes: • When bi-amping is ...
-
Integra DTR-5.9 - page 44
44 First Time Setup —Continued If you connect a video component to an HDMI IN, you must assign that input to an input selector . F or example, if you connect your D VD player to HDMI IN 1, you must assign HDMI IN 1 to the D VD input selector . These are the default assignments. Notes: • Each HDMI IN cannot be assigned to more than one input sel ...
-
Integra DTR-5.9 - page 45
45 First Time Setup —Continued If you connect a video component to a COMPONENT VIDEO IN, you must assign that input to an input selector . F or example, if you connect your D VD player to COMPONENT VIDEO IN 2, you must assign COM- PONENT VIDEO IN 2 to the D VD input selector . These are the default assignments. Note: • This procedure can also b ...
-
Integra DTR-5.9 - page 46
46 First Time Setup —Continued • When an HDMI IN is assigned to an input selector in “HDMI Input Setup” on page 44, this input assign- ment is automatically set to the same HDMI IN. And in addition to the usual inputs (e.g., CO AX1, CO AX2, etc.), you can also select HDMI inputs. If you change the input assignment from an HDMI IN to one of ...
-
Integra DTR-5.9 - page 47
47 First Time Setup —Continued When an input source is selected, the A V receiver checks the relev ant audio inputs for the presence of an audio signal and automatically selects an input. W ith this set- ting, you can specify which audio inputs the A V receiver will check for signals. Note: •Y ou can select a different option for each input sel ...
-
Integra DTR-5.9 - page 48
48 Pla ying Y our A V Components Basic A V Receiver Operation 3 1 3 1 1 Use the A V receiver’ s input selector b uttons to select an input source. To select an input sour ce with the remote controller , press its Input Selec- tor buttons. To listen to a D VD player connected to the multichannel D VD input (page 26), press the A V receiver’ s [M ...
-
Integra DTR-5.9 - page 49
49 Common Functions This section explains functions that can be used with an y input source. Y ou can adjust the brightness of the display . Y ou can temporarily mute the output of the A V receiver. To unmute the A V receiver, press the remote control- ler’ s [Muting] b utton again, or adjust the volume. The output is unmuted and the MUTING indic ...
-
Integra DTR-5.9 - page 50
50 Common Functions —Continued 7 For pri vate listening, you can connect a pair of stereo headphones (1/4-inch phone plug) to the A V receiver’ s Phones jack. Notes: •A lw ays turn down the v olume before connecting your headphones. • While the headphones plug is inserted in the PHONES jack, the speakers are turned of f. (The Powered Zone 2 ...
-
Integra DTR-5.9 - page 51
51 Common Functions —Continued The following table sho ws the display indicator for each digital signal format. Normally , the A V receiv er detects the format of digital input signals automatically . Howev er , if you experience either of the following issues when playing PCM or DTS sources, you can specify the signal format manually . • If th ...
-
Integra DTR-5.9 - page 52
52 Listening to the Radio For AM tuning to work properly , you must specify the AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted. Note: • This procedure can also be performed on the A V receiv er by using its [Setup], [Enter], and arrow b ut- tons. AM Frequency Step Setup (on some models) ...
-
Integra DTR-5.9 - page 53
53 Listening to the Radio —Continued W ith the built-in tuner , you can enjoy AM and FM radio stations and store your fa vorite stations as presets for easy selection. T uning into AM/FM Radio Stations ■ A uto T uning Mode When tuned into a station, the TUNED indicator appears. When tuned into a stereo FM station, the FM STEREO indicator also a ...
-
Integra DTR-5.9 - page 54
54 Listening to the Radio —Continued ■ T uning into Stations by Frequenc y Y ou can tune into AM and FM stations directly by enter- ing the appropriate frequency . Displaying AM/FM Radio Inf ormation 1 Press the [T uner] button repeat- edly to select AM r FM, f ollowed by the [D.TUN] b utton. (Actual display depends on country .) 2 Within 8 sec ...
-
Integra DTR-5.9 - page 55
55 Listening to the Radio —Continued Y ou can store a combination of up to 40 of your fav orite AM and FM radio stations. Deleting Presets Selecting Presets Presetting AM/FM Stations 1 T une into the AM or FM station you want to store as a preset. 2 Press the [Memory] button. The preset number flashes. 3 While the preset number is flash- ing (a ...
-
Integra DTR-5.9 - page 56
56 Listening to the Radio —Continued Note: Hardware and required basic monthly subscription are sold separately . Installation costs and other fees and taxes, including a one-time acti vation fee may apply . Subscription fee is consumer only . All fees and program- ming are subject to change. What is SIRIUS Satellite Radio? Simply The Best Radio ...
-
Integra DTR-5.9 - page 57
57 Listening to the Radio —Continued Setting the Satellite Radio Mode Before you can listen to SIRIUS Satellite Radio, you must set the Satellite Radio mode to SIRIUS. Selecting SIRIUS Satellite Radio 1 Press the [Receiver] Remote Mode button, f ollowed b y the [Setup] button. The main menu appears onscreen. 2 Use the Up and Down [ ]/[ ] buttons ...
-
Integra DTR-5.9 - page 58
58 Listening to the Radio —Continued Signing Up for SIRIUS Satellite Radio Before you can use SIRIUS Satellite Radio, you must first sign up for an account. Y ou’ll need a major credit card and your SIRIUS Satellite Radio ID, which you can get from the A V receiver, as e xplained below , or from the SiriusConnect Home tuner package. Note: •Y ...
-
Integra DTR-5.9 - page 59
59 Listening to the Radio —Continued ■ Direct T uning Y ou can select a SIRIUS Satellite Radio channel directly by entering its number . Notes: • If you select an unav ailable channel, “INV ALID CHANNEL” appears on the display . • If you select a channel that you are not subscribed to, “CALL SIRIUS” appears on the display . • Chan ...
-
Integra DTR-5.9 - page 60
60 Listening to the Radio —Continued ■ Selecting Presets ■ Deleting Presets P arental Lock W ith SIRIUS Parental Lock, you can lock out channels that you do not want to recei ve and use a 4-digit PIN number to prev ent others from unlocking them. To select a preset, use the Preset [ ]/[ ] buttons, or the remote controller’ s CH [+/–] butt ...
-
Integra DTR-5.9 - page 61
61 Listening to the Radio —Continued Notes: • While a channel is locked, it cannot be selected for listening. •T o unlock a channel, you must enter the correct PIN number and change it to Unlocked in step 6. Changing the PIN Number 5 Use the number b uttons to enter the 4-digit PIN number . Or Use the Left and Right [ ]/[ ] b uttons to select ...
-
Integra DTR-5.9 - page 62
62 Listening to the Radio —Continued 4 Use the Up and Down [ ]/[ ] buttons to select “SIRIUS Paren- tal Lock, ” and then press [Enter]. The SIRIUS Parental Lock screen appears. 5 Use the number b uttons to enter the old 4-digit PIN number . Or Use the Left and Right [ ]/[ ] b uttons to select a n umber on the screen, and then press [Enter]. R ...
-
Integra DTR-5.9 - page 63
63 Listening to the Radio —Continued Displaying SIRIUS Satellite Radio Information The following information can be displayed: Notes: • If the category , artist/composer , or song title is not av ailable, “- - -” will be displayed instead. P ositioning the SiriusConnect Home Antenna Y ou can check the strength of the SIRIUS Satellite Radio ...
-
Integra DTR-5.9 - page 64
64 Listening to the Radio —Continued SIRIUS Satellite Radio Messages The following messages may appear while using SIRIUS Satellite Radio. ❑ AC Q UIRING The SiriusConnect receiv er is acquiring the signal or no signal is present. Make sure the SiriusConnect Home tuner is connected properly and that there are no obstacles close by . ❑ ANTENNA ...
-
Integra DTR-5.9 - page 65
65 Listening to the Radio —Continued RDS only works in areas where RDS broadcasts are av ailable. When tuned to an RDS station, the RDS indi- cator appears. ■ What is RDS? RDS stands for Radio Data System and is a method of transmitting data in FM radio signals. It was de veloped by the European Broadcasting Union (EBU) and is a vail- able in m ...
-
Integra DTR-5.9 - page 66
66 Listening to the Radio —Continued Displaying Radio T ext (R T) When tuned to an RDS station that’ s broadcasting te xt information, the text can be displayed. Notes: • The message “W aiting” may appear while the A V receiv er waits for the R T information. • If the message “No T ext Data” appears on the display , no R T informati ...
-
Integra DTR-5.9 - page 67
67 Using the Listening Modes F or a description of each listening mode, see “ About the Listening Modes” on page 74. Selecting on the A V Receiver ■ [Movie/TV] b utton This button selects the listening modes intended for use with movies and TV . ■ [Music] button This button selects the listening modes intended for use with music. ■ [Game] ...
-
Integra DTR-5.9 - page 68
68 Using the Listening Modes —Continued Analog and PCM Sources Requires 6.1/7.1 speakers. Not available while Powered Zone 2 is being used. Requires 7.1 speakers. Not available while Powered Zone 2 is being used. Listening Modes A v ailable for Eac h Source Format Button Source f ormat PCM Multi channel Analog Multichannel 32–96 kHz *1 *1. 32/4 ...
-
Integra DTR-5.9 - page 69
69 Using the Listening Modes —Continued Dolby Digital and Dolb y Digital Plus Sources Requires 6.1/7.1 speakers. Not available while Powered Zone 2 is being used. Requires 7.1 speakers. Not available while Powered Zone 2 is being used. Note: •W ith some HD D VD and Blu-ray discs, a noise may be heard during playback. This may occur when the aud ...
-
Integra DTR-5.9 - page 70
70 Using the Listening Modes —Continued DTS Sources Requires 6.1/7.1 speakers. Not available while Powered Zone 2 is being used. Requires 7.1 speakers. Not available while Powered Zone 2 is being used. Button Source f ormat DTS, DTS 96/24 DTS Discrete/Matrix Multichannel 2ch Mono Media Listening Mode DV D, CD, etc. D VD, CD, etc. [Movie/TV] Mono ...
-
Integra DTR-5.9 - page 71
71 Using the Listening Modes —Continued T rueHD Sources Requires 6.1/7.1 speakers. Not available while Powered Zone 2 is being used. Requires 7.1 speakers. Not available while Powered Zone 2 is being used. Note: •W ith some HD D VD and Blu-ray discs, a noise may be heard during playback. This may occur when the audio format changes during playb ...
-
Integra DTR-5.9 - page 72
72 Using the Listening Modes —Continued DTS-HD Sources Requires 6.1/7.1 speakers. Not available while Powered Zone 2 is being used. Requires 7.1 speakers. Not available while Powered Zone 2 is being used. Note: •W ith some HD D VD and Blu-ray discs, a noise may be heard during playback. This may occur when the audio format changes during playba ...
-
Integra DTR-5.9 - page 73
73 Using the Listening Modes —Continued DTS Express and DSD Sources If you can select PCM or DSD output on your SA CD player , in some cases, selecting PCM will provide the best sound quality . Note: •W ith some HD D VD and Blu-ray discs, a noise may be heard during playback. This may occur when the audio format changes during playback. It is n ...
-
Integra DTR-5.9 - page 74
74 Using the Listening Modes —Continued The A V receiver’ s listening modes can transform your listening room into a movie theater or concert hall, with high fidelity and stunning surround sound. Direct In this mode, audio from the input source is output directly with minimal processing, providing high-fidel- ity reproduction. All of the sour ...
-
Integra DTR-5.9 - page 75
75 Using the Listening Modes —Continued DTS-ES Matrix This mode is for use with DTS-ES Matrix soundtracks, that use a matrix-encoded back-channel for 6.1/7.1- channel playback. Use it with D VDs that bear the DTS- ES logo, especially those with a DTS-ES Matrix soundtrack. DTS Neo:6 This mode expands an y 2-channel source for 7.1-chan- nel playbac ...
-
Integra DTR-5.9 - page 76
76 Recor ding This section explains ho w to record the input source and how to record audio and video from separate sources. Notes: • The surround sound and DSP listening modes cannot be recorded. • Copy-protected D VDs cannot be recorded. • Sources connected to the analog multichannel input cannot be recorded. • Sources connected to a digi ...
-
Integra DTR-5.9 - page 77
77 Adjusting the Listening Modes W ith the Audio Adjust functions and settings, you can adjust the sound and listening modes as you like. The Audio Adjust settings are explained below . Multiplex/Mono Settings Multiplex ■ Input Ch This setting determines which channel of a stereo multi- plex source is output. Use it to select audio channels or la ...
-
Integra DTR-5.9 - page 78
78 Adjusting the Listening Modes —Continued ■ Center Width W ith this setting, you can adjust the width of the sound from the center speaker when using the Dolby Pro Logic IIx Music listening mode. Normally , if you’re using a center speaker , the center channel sound is output by only the center speaker . (If you’re not using a center spea ...
-
Integra DTR-5.9 - page 79
79 Adjusting the Listening Modes —Continued Y ou can change various audio settings by pressing the [Audio] button. Note: • When the Audio TV Out setting is set to On (page 91), the [A UDIO] b utton is disabled. The Audio Adjust settings are explained below . T one Control Settings Y ou can adjust the bass and treble for the front speakers, exce ...
-
Integra DTR-5.9 - page 80
80 Adjusting the Listening Modes —Continued Au d yssey Dynamic EQ ■ DynamicEQ W ith Audyssey Dynamic EQ, you can enjo y great sound ev en when listening at low v olume lev els. Audyssey Dynamic EQ solv es the problem of deteriorat- ing sound quality as volume is decreased by taking into account human perception and room acoustics. It does so by ...
-
Integra DTR-5.9 - page 81
81 Adjusting the Listening Modes —Continued On the Listening Mode Preset menu, you can specify a default listening mode for each of the audio formats sup- ported by each input selector . The A V receiver will then select the listening mode automatically depending on the format of the input signal. Y ou can still select the other listening modes, ...
-
Integra DTR-5.9 - page 82
82 Ad v anced Setup This section explains ho w to check the speaker settings and how to set them manually , which is useful if you change a speaker after performing the automatic speaker setup. Some of the speaker settings are set automatically by the Automatic Speaker Setup function (see page 39). Speaker Configuration W ith the Speaker Configur ...
-
Integra DTR-5.9 - page 83
83 Adv anced Setup —Continued Note: • These settings cannot be changed while headphones are connected or the multichannel D VD input is being used. Low-P ass Filter f or the LFE Channel W ith this setting, you can specify the cutoff frequenc y of the LFE channel’ s lo w-pass filter (LPF), which can be used to filter out unwanted hum. The LP ...
-
Integra DTR-5.9 - page 84
84 Adv anced Setup —Continued Double Bass W ith the Double Bass function, you can boost bass out- put by feeding bass sounds from the front left, right, and center channels to the subwoofer . This function can be set only if the Subwoofer setting (step 3) is set to Y es, and the Front setting (step 4) is set to Full Band in the Speaker Configura ...
-
Integra DTR-5.9 - page 85
85 Adv anced Setup —Continued Notes: • The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Left distance. For e xample, if the Left distance is set to 20 ft. (6 m), the Center and Subwoofer distances can be set between 15 and 25 ft. (4.5 and 7.5 m). • The Surround and Surround Back distances can be set up t ...
-
Integra DTR-5.9 - page 86
86 Adv anced Setup —Continued Equalizer Settings Here you can adjust the tone of individual speak ers. T o set the volume of indi vidual speakers, see page 85. Notes: • The front, center , surround, and surround back speak- ers can be adjusted at 63Hz, 250Hz, 1000Hz, 4000Hz, and 16000Hz. The subw oofer can be adjusted at 25Hz, 40Hz, 63Hz, 100Hz ...
-
Integra DTR-5.9 - page 87
87 Adv anced Setup —Continued This section explains items on the Source Setup menu. Items can be set individually for each input selector . IntelliV olume W ith IntelliV olume, you can set the input level for each input selector individually . This is useful if one of your source components is louder or quieter than the others. Use the Left and R ...
-
Integra DTR-5.9 - page 88
88 Adv anced Setup —Continued This section explains items on the Miscellaneous menu. Note: • This procedure can also be performed on the A V receiv er by using its [Setup], [Enter], and arrow b ut- tons. V olume Setup ■ Maximum V olume W ith this setting, you can limit the maximum volume. The Maximum V olume range is Off, 79 to 30. ■ Po wer ...
-
Integra DTR-5.9 - page 89
89 Adv anced Setup —Continued This section explains items on the Hardware menu. Note: • This procedure can also be performed on the A V receiv er by using its [Setup], [Enter], and arrow b ut- tons. Remote Control ■ Remote ID When sev eral Integra/Onk yo components are used in the same room, their remote ID codes may ov erlap. T o dif- ferent ...
-
Integra DTR-5.9 - page 90
90 Adv anced Setup —Continued Zone 2 See “Zone 2” on page 93. T uner ■ AM Frequency (on some models) See “ AM Frequency Step Setup (on some models)” on page 52. ■ SA T Radio Mode (on North American model) If you connect a SIRIUS Satellite Radio antenna to the AV recei ver , set this setting to SIRIUS. Otherwise, select None. See the s ...
-
Integra DTR-5.9 - page 91
91 Adv anced Setup —Continued ■ A udio TV Out This setting determines whether audio receiv ed by an HDMI input is output by the HDMI outputs. Y ou may w ant to change this setting to On if your TV is connected to an HDMI output and you want to listen to audio from an HDMI component through your TV’ s speakers. Nor- mally , it should be set to ...
-
Integra DTR-5.9 - page 92
92 Adv anced Setup —Continued TV Control Select Enable to control the A V receiver from an RIHD- compatible TV connected via HDMI. Disable: TV Control disabled. Enable: TV Control enabled. Notes: • Select Disable if your TV is incompatible or you’ re not sure about its compatibility . • The TV Control setting can be set only when the abo ve ...
-
Integra DTR-5.9 - page 93
93 Zone 2 In addition to your main listening room, you can also enjoy playback in the other room, or as we call Zone 2. And, you can select a different source for each room. There are two ways you can connect Zone 2 speak ers: 1. Connect them directly to the A V receiver. 2. Connect them to an amp in Zone 2. Connecting Y our Zone 2 Speakers Directl ...
-
Integra DTR-5.9 - page 94
94 Zone 2 —Continued If you’ ve connected your Zone 2 speak ers to the A V receiv er, as explained in “Connecting Y our Zone 2 Speakers Directly to the A V receiv er” on page 93, you must set the Powered Zone 2 setting to Act (Activ ated). Notes: • When Act is selected and Zone 2 turned on, the Zone 2 speakers connected to the ZONE 2 L/R ...
-
Integra DTR-5.9 - page 95
95 Zone 2 —Continued If you’ ve connected your Zone 2 speak ers to an amp with no volume control, set the Zone 2 Out setting, to V ariable so that you can set the zone’ s volume, balance, and tone on the A V receiver. Note: • This procedure can also be performed on the A V receiv er by using its [Setup], [Enter], and arrow b ut- tons. Zone ...
-
Integra DTR-5.9 - page 96
96 Zone 2 —Continued This section explains ho w to turn Zone 2 on and off, ho w to select an input source for Zone 2, and how to adjust the volume for Zone 2. Controlling Zone 2 fr om the A V receiver Notes: • Only analog input sources are output by Zone 2. Dig- ital input sources are not output. If no sound is heard when an input source is sel ...
-
Integra DTR-5.9 - page 97
97 Zone 2 —Continued Note: •T o control Zone 2, you must press the remote control- ler’ s [Zone 2] b utton first. Adjusting the V olume of Zone 2 Adjusting the Balance of Zone 2 Muting Zone 2 Adjusting the T one of Zone 2 Notes: • Zone 2 can also be unmuted by adjusting the volume. • The Zone 2 lev el, balance, and tone functions hav e n ...
-
Integra DTR-5.9 - page 98
98 Zone 2 —Continued The 12V triggers A, B, and C can be used to turn on 12V trigger-capable components automatically when the y are selected as the input source. The triggers can be set so that they acti vate when a connected component is selected as the input source for the main room or Zone 2. When triggered, the output from a 12V TRIGGER OUT ...
-
Integra DTR-5.9 - page 99
99 Zone 2 —Continued To control the A V receiver with the remote controller while you’ re in Zone 2, you’ll need a commercially av ailable multiroom remote control kit for each zone. • Multiroom kits are made by Niles and Xantech. These kits can also be used when there isn’t a clear line of sight to the A V receiver’ s remote sensor , s ...
-
Integra DTR-5.9 - page 100
100 Contr olling Other Components Y ou can control your D VD player , CD player, and other components with the A V receiver’ s remote controller . To control another component, you must first enter that component’ s remote control code to a Remote Mode b ut- ton. This section explains ho w to enter remote control codes and how to control your ...
-
Integra DTR-5.9 - page 101
101 Controlling Other Components —Continued Remote Control Codes f or Integra/Onky o Components Connected via Integra/Onk yo components that are connected via are controlled by pointing the remote controller at the AV receiver, not the component. This allows you to con- trol components that are out of view , in a rack, for exam- ple. If you want ...
-
Integra DTR-5.9 - page 102
102 Controlling Other Components —Continued By pressing the [TV] or [Game/TV] Remote Mode but- tons that’ s been programmed with the remote control code for your TV (TV/D VD combination or TV/VCR combination), you can control your TV with the follo w- ing buttons. F or details on entering a remote control code for a dif fer- ent component, see ...
-
Integra DTR-5.9 - page 103
103 Controlling Other Components —Continued By pressing the Remote Mode button that’ s been pro- grammed with the remote control code for your D VD player (HD D VD, Blu-ray , or TV/D VD combination), you can control your player with the following b uttons. The [D VD] Remote Mode button is preprogrammed with the remote control code for controlli ...
-
Integra DTR-5.9 - page 104
104 Controlling Other Components —Continued T Play Mode b utton Selects play modes on components with selectable play modes. U CLR button Cancels functions and clears entered numbers. Note: • If you enter the remote control code for a HD D VD or Blu-ray player that has A, B, C, and D or colored b ut- tons, the [SEARCH], [REPEA T], [RANDOM], and ...
-
Integra DTR-5.9 - page 105
105 Controlling Other Components —Continued By pressing the Remote Mode button that’ s been pro- grammed with the remote control code for your satellite receiv er , cable receiv er , or D VD recorder (DBS/D VR combination or cable/D VR combination), you can con- trol your player with the following b uttons. F or details on entering a remote con ...
-
Integra DTR-5.9 - page 106
106 Controlling Other Components —Continued By pressing the Remote Mode button that’ s been pro- grammed with the remote control code for your CD player , CD recorder , or MD player , you can control your player with the following b uttons. The [CD] Remote Mode button is preprogrammed with the remote control code for controlling an Integra/Onk ...
-
Integra DTR-5.9 - page 107
107 Controlling Other Components —Continued By pressing the Remote Mode button that’ s been pro- grammed with the remote control code for your RI Dock, you can control your iPod in the RI Dock with the fol- lowing b uttons. For details on entering a remote control code, see page 100. When Using an RI Dock: • Connect the RI Dock to the T APE I ...
-
Integra DTR-5.9 - page 108
108 Controlling Other Components —Continued P Fast Forwar d [ ] button Press and hold to fast forward. Q Stop [ ] b utton Stops playback and displays a menu. R Play Mode b utton Selects play modes on components with selectable play modes. W orks as a Resume button when used with a DS-A2 RI Dock. S Random button* Used with the shuffle function. * ...
-
Integra DTR-5.9 - page 109
109 Tr oubleshooting If you hav e any trouble using the A V receiv er, look for a solution in this section. If you can’t resolv e the issue yourself, contact the dealer . Can’t turn on the A V receiver • Make sure that the po wer cord is plugged into the wall outlet properly . • Unplug the power cord from the w all outlet, wait 5 seconds or ...
-
Integra DTR-5.9 - page 110
110 Tr oubleshooting —Continued • Not much sound may be produced by the surround back speakers with some sources. • Check the Speaker Configuration (page 82). • While Powered Zone 2 is being used, playback in the main room is reduced to 5.1-channels and the sur- round back speakers produce no sound (page 94). The subwoof er produces no sou ...
-
Integra DTR-5.9 - page 111
111 Tr oubleshooting —Continued • If the message “Resolution Error” appears on the A V receiv er’ s display , this indicates that your TV does not support the current video resolution and you need to select another resolution on your D VD player . Reception is noisy , stereo FM reception suffers from hiss, or the FM STEREO indicator doesn ...
-
Integra DTR-5.9 - page 112
112 Tr oubleshooting —Continued The A V recei ver can upcon vert component video, S-V ideo, and composite video sources for display on a TV connected to the HDMI OUT . Howe ver , if the picture quality of the source is poor, upcon version may make the picture worse or disappear altogether . In this case, try setting the HDMI Output Resolution set ...
-
Integra DTR-5.9 - page 113
113 Specifications Amplifier Section Video Section T uner Section ■ FM ■ AM ■ Digital T uner General ■ Video Inputs ■ Video Outputs ■ A udio Inputs ■ A udio Outputs ■ Control T erminal Specifications and features are subject to change without notice. Rated Output Power North American: 90 watts minimum continuous power per channel ...
-
Integra DTR-5.9 - page 114
114 Video Resolution Char t The following tables sho w ho w video signals at different resolutions are output by the A V receiv er. NTSC PA L HDMI COMPONENT S - VIDEO COMPOSITE NTSC P AL NTSC P AL 1080P 1080i 720P 480P 480i 1080P 1080i 720P 480P 480i 480i 480i 480i 480i HDMI 1080P ✔ 1080i ✔ 720P ✔ 480P ✔ 480i ✔ COMPONENT 1080P 1080i ✔ ? ...
-
Integra DTR-5.9 - page 115
115 Onscreen Setup Menus The onscreen setup menus appear on the connected TV and pro vide a con ve- nient way to change the A V receiv er’ s v arious settings. Settings are organized into eight categories on the main menu , most containing a submenu . The following map sho ws ho w the setup menus are organized. Use the page numbers to locate info ...
-
Integra DTR-5.9 - page 116
116 SN 29344688 (C) Copyright 2008 ONKY O CORPORA TION Japan. All rights reserved. I0804-1 Integra Division of ONKYO U.S.A. CORPORATION 18 park Way, Upper Saddle River, N.J. 07458, U.S.A. Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com Integra Division of ONKYO CORPORATION Sales & Product Planning Div.: 2-1, Nisshin-cho, N ...
¿Tienes una pregunta acerca de Integra DTR-5.9?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Integra DTR-5.9, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Integra DTR-5.9 probablemente compartirá una forma de solucionarlo.