Español dropdown-ico

Manual de instrucciones Analog Devices ADuC812

56 de páginas 0.83 mb
Descargar

Pasar a la página of 56

Summary
  • Analog Devices ADuC812 - page 1

    REV. B Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Analog ...

  • Analog Devices ADuC812 - page 2

    REV. B ADuC812 –2– FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 GENERAL DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 ABSOLUTE MAXIMUM RATINGS . . . . . . . . . . . . . . . . . . . . 6 ORDERING ...

  • Analog Devices ADuC812 - page 3

    REV. B –3– ADuC812 ADuC812BS Parameter V DD = 5 V V DD = 3 V Unit Test Conditions/Comments ADC CHANNEL SPECIFICATIONS DC ACCURACY 3, 4 Resolution 12 12 Bits Integral Nonlinearity ± 1/2 ± 1/2 LSB typ f SAMPLE = 100 kHz ± 1.5 LSB max f SAMPLE = 100 kHz ± 1.5 ± 1.5 LSB typ f SAMPLE = 200 kHz Differential Nonlinearity ± 1 ± 1 LSB typ f SAMPL ...

  • Analog Devices ADuC812 - page 4

    REV. B –4– ADuC812–SPECIFICA TIONS 1, 2 ADuC812BS Parameter V DD = 5 V V DD = 3 V Unit Test Conditions/Comments DAC AC CHARACTERISTICS Voltage Output Settling Time 15 15 µ s typ Full-Scale Settling Time to Within 1/2 LSB of Final Value Digital-to-Analog Glitch Energy 10 10 nV sec typ 1 LSB Change at Major Carry REFERENCE INPUT/OUTPUT REF IN ...

  • Analog Devices ADuC812 - page 5

    REV. B –5– ADuC812 ADuC812BS Parameter V DD = 5 V V DD = 3 V Unit Test Conditions/Comments DIGITAL OUTPUTS Output High Voltage (V OH ) 2.4 V min V DD = 4.5 V to 5.5 V I SOURCE = 80 µ A 4.0 2.6 V typ V DD = 2.7 V to 3.3 V I SOURCE = 20 µ A Output Low Voltage (V OL ) ALE, PSEN , Ports 0 and 2 0.4 V max I SINK = 1.6 mA 0.2 0.2 V typ I SINK = 1.6 ...

  • Analog Devices ADuC812 - page 6

    REV. B ADuC812 –6– PIN CONFIGURATION 5 2 51 50 49 48 43 42 41 40 4 7 46 45 44 1 4 15 16 17 18 19 20 21 2 2 23 24 25 26 1 2 3 4 5 6 7 8 9 10 13 12 11 39 38 37 36 35 34 33 32 31 30 29 28 27 PIN 1 IDENTIFIER TOP VIEW (Not to Scale) P0.7/AD7 P0.6/AD6 P0.5/AD5 P0.4/AD4 DV DD DGND P0.3/AD3 P0.2/AD2 P0.1/AD1 P0.0/AD0 ALE PSEN EA P1.0/ADC0/T2 P1.1/ADC1 ...

  • Analog Devices ADuC812 - page 7

    REV. B ADuC812 –7– PIN FUNCTION DESCRIPTIONS Mnemonic Type Function DV DD P Digital Positive Supply Voltage, 3 V or 5 V Nominal AV DD P Analog Positive Supply Voltage, 3 V or 5 V Nominal C REF I Decoupling Input for On-Chip Reference. Connect 0.1 µ F between this pin and AGND. V REF I/O Reference Input/Output. This pin is connected to the inte ...

  • Analog Devices ADuC812 - page 8

    REV. B ADuC812 –8– Mnemonic Type Function PSEN O Program Store Enable, Logic Output. This output is a control signal that enables the external program memory to the bus during external fetch operations. It is active every six oscillator periods except during external data memory accesses. This pin remains high during internal program execution. ...

  • Analog Devices ADuC812 - page 9

    REV. B ADuC812 –9– ARCHITECTURE, MAIN FEATURES The ADuC812 is a highly integrated true 12-bit data acquisition system. At its core, the ADuC812 incorporates a high- perfor- mance 8-bit (8052-Compatible) MCU with on-chip reprogrammable nonvolatile Flash program memory control- ling a multichannel (8-input channels), 12-bit ADC. The chip incorpor ...

  • Analog Devices ADuC812 - page 10

    REV. B ADuC812 –10– OVERVIEW OF MCU-RELATED SFR s Accumulator SFR ACC is the Accumulator register and is used for math opera- tions including addition, subtraction, integer multiplication and division, and Boolean bit manipulations. The mnemonics for accumulator-specific instructions refer to the Accumulator as A. B SFR The B register is used w ...

  • Analog Devices ADuC812 - page 11

    REV. B ADuC812 –11– SPECIAL FUNCTION REGISTERS All registers except the program counter and the four general purpose register banks, reside in the special function register (SFR) area. The SFR registers include control, configuration and data registers that provide an interface between the CPU and other on- chip peripherals. Figure 4 shows a fu ...

  • Analog Devices ADuC812 - page 12

    REV. B ADuC812 –12– ADC CIRCUIT INFORMATION General Overview The ADC conversion block incorporates a fast, 8-channel, 12-bit, single supply A/D converter. This block provides the user with multichannel mux, track/hold, on-chip reference, calibration features and A/D converter. All components in this block are easily configured via a 3-register ...

  • Analog Devices ADuC812 - page 13

    REV. B ADuC812 –13– ADCCON1 – (ADC Control SFR #1) The ADCCON1 register controls conversion and acquisition times, hardware conversion modes and power-down modes as detailed below. SFR Address: EFH SFR Power-On Default Value: 20H Table III. ADCCON1 SFR Bit Designations Bit Name Description ADCCON1.7 MD1 The mode bits (MD1, MD0) select the act ...

  • Analog Devices ADuC812 - page 14

    REV. B ADuC812 –14– ADCCON2 – (ADC Control SFR #2) The ADCCON2 register controls ADC channel selection and conversion modes as detailed below. SFR Address: D8H SFR Power On Default Value: 00H I C D AA M DV N O C CV N O C S3 S C2 S C1 S C0 S C Table IV. ADCCON2 SFR Bit Designations L ocation Name Description ADCCON2.7 ADCI The ADC interrupt bi ...

  • Analog Devices ADuC812 - page 15

    REV. B ADuC812 –15– Driving the A/D Converter The ADC incorporates a successive approximation (SAR) archi- tecture involving a charge-sampled input stage. Figure 7 shows the equivalent circuit of the analog input section. Each ADC conversion is divided into two distinct phases as defined by the position of the switches in Figure 7. During the s ...

  • Analog Devices ADuC812 - page 16

    REV. B ADuC812 –16– ground, no amplifier can deliver signals all the way to ground when powered by a single supply. Therefore, if a negative supply is available, you might consider using it to power the front-end amplifiers. If you do, however, be sure to include the Schottky diodes shown in Figure 8 (or at least the lower of the two diodes) to ...

  • Analog Devices ADuC812 - page 17

    REV. B ADuC812 –17– core. This mode allows the ADuC812 to capture a contiguous sample stream at full ADC update rates (200 kHz). A typical DMA Mode configuration example. To set the ADuC812 into DMA mode a number of steps must be followed. 1. The ADC must be powered down. This is done by ensuring MD1 and MD0 are both set to 0 in ADCCON1. 2. The ...

  • Analog Devices ADuC812 - page 18

    REV. B ADuC812 –18– the gain calibration coefficient is divided into ADCGAINH (6 bits) and ADCGAINL (8 bits).The offset calibration coefficient c o m pen- sates for dc offset errors in both the ADC and the input signal. Increasing the offset coefficient compensates for positive offset, and effectively pushes the ADC Transfer Function DOWN. Decr ...

  • Analog Devices ADuC812 - page 19

    REV. B ADuC812 –19– Using the Flash/EE Program Memory T his 8K Byte Flash/EE Program Memory array is mapped into the lower 8K bytes of the 64K bytes program space addres- sa ble by the ADuC812 and will be used to hold user code in typical applications. The program memory array can be programmed in one of two modes, namely: Serial Downloading (I ...

  • Analog Devices ADuC812 - page 20

    REV. B ADuC812 –20– ECON—Flash/EE Memory Control SFR This SFR acts as a command interpreter and may be written with one of five command modes to enable various read, pro- gram and erase cycles as detailed in Table VII: Table VII. ECON–Flash/EE Memory Control Register Command Modes Command Byte Command Mode 01H READ COMMAND Re sults in four ...

  • Analog Devices ADuC812 - page 21

    REV. B ADuC812 –21– USER INTERFACE TO OTHER ON-CHIP ADuC812 PERIPHERALS The following section gives a brief overview of the various peripherals also available on-chip. A summary of the SFRs used to control and configure these peripherals is also given. DAC The ADuC812 incorporates tw o 12-bit, voltage output DAC s on-chip. Ea ch has a rail-to-r ...

  • Analog Devices ADuC812 - page 22

    REV. B ADuC812 –22– Using the D/A Converter The on-chip D/A converter architecture consists of a resistor string DAC followed by an output buffer amplifier, the func- tional equivalent of which is illustrated in Figure 18. Details of the actual DAC architecture can be found in U.S. Patent Num- ber 5969657 ( www.uspto.gov ). Features of this arc ...

  • Analog Devices ADuC812 - page 23

    REV. B ADuC812 –23– SOURCE/SINK CURRENT – mA 3 0 5 10 15 OUTPUT VOLTAGE – V 2 1 0 Figure 21. Source and Sink Current Capability with V REF = V DD = 3 V To drive significant loads with the DAC outputs, external buff- ering may be required, as illustrated in Figure 22. 9 ADuC812 10 Figure 22. Buffering the DAC Outputs The DAC output buffer al ...

  • Analog Devices ADuC812 - page 24

    REV. B ADuC812 –24– WATCHDOG TIMER The purpose of the watchdog timer is to generate a device reset within a reasonable amount of time if the ADuC812 enters an erroneous state, possibly due to a programming error. The Watchdog function can be disabled by clearing the WDE (Watchdog Enable) bit in the Watchdog Control (WDCON) SFR. When enabled, th ...

  • Analog Devices ADuC812 - page 25

    REV. B ADuC812 –25– POWER SUPPLY MONITOR As its name suggests, the Power Supply Monitor, once enabled, monitors both supplies (AV DD and DV DD ) on the ADuC812. It will indicate when either power supply drops below one o f fi ve user-selectable voltage trip points from 2.63 V to 4.63 V. F o r correct operation of the Power Supply Monitor functi ...

  • Analog Devices ADuC812 - page 26

    REV. B ADuC812 –26– SERIAL PERIPHERAL INTERFACE The ADuC812 integrates a complete hardware Serial Peripheral Interface (SPI) on-chip. SPI is an industry standard s yn chronous serial interface that allows eight bits of data to be synchronously transmitted and received simultaneously, i.e., full duplex. It should be noted that the SPI pins are s ...

  • Analog Devices ADuC812 - page 27

    REV. B ADuC812 –27– Table XII. SPICON SFR Bit Designations (continued) Bit Name Description 1 SPR1 SPI Bit-Rate Select Bits. 0 SPR0 These bits select the SCLOCK rate (bit-rate) in Master Mode as follows: SPR1 SPR0 Selected Bit Rate 00f OSC /4 01f OSC /8 10f OSC /32 1 1 fosc/64 In SPI Slave Mode, i.e., SPIM = 0, the logic level on the external S ...

  • Analog Devices ADuC812 - page 28

    REV. B ADuC812 –28– I 2 C-COMPATIBLE INTERFACE The ADuC812 supports a 2-wire serial interface mode which is I 2 C compatible. The I 2 C-compatible interface shares its pins with the on-chip SPI interface and therefore the user can only enable one or the other interface at any given time (see SPE in SPICON previously). An Application Note descri ...

  • Analog Devices ADuC812 - page 29

    REV. B ADuC812 –29– 8051-COMPATIBLE ON-CHIP PERIPHERALS This section gives a brief overview of the various secondary peripheral circuits that are also available to the user on-chip. These remaining functions are fully 8051-compatible and are controlled via standard 8051 SFR bit definitions. Parallel I/O Ports 0–3 The ADuC812 uses four input/o ...

  • Analog Devices ADuC812 - page 30

    REV. B ADuC812 –30– User configuration and control of all Timer operating modes is achieved via three SFRs, namely: TMOD, TCON: Control and configuration for Timers 0 and 1. T2CON: Control and configuration for Timer 2. TMOD Timer/Counter 0 and 1 Mode Register SFR Address 89H Power-On Default Value 00H Bit Addressable No e t a GT / C1 M0 Me t a ...

  • Analog Devices ADuC812 - page 31

    REV. B ADuC812 –31– 1 F T1 R T0 F T0 R T1 E I 1 1 T I 1 0 E I 1 0 T I 1 NOTE 1 These bits are not used in the control of timer/counter 0 and 1, but are used instead in the control and monitoring of the external INT0 and INT1 interrupt pins. Table XVII. TCON SFR Bit Designations Bit Name Description 7 TF1 Timer 1 Overflow Flag. Set by hardware o ...

  • Analog Devices ADuC812 - page 32

    REV. B ADuC812 –32– Mode 2 (8-Bit Timer/Counter with Auto Reload) Mode 2 configures the timer register as an 8-bit counter (TL0) with automatic reload, as shown in Figure 28. Overflow from TL 0 not only sets TF0, but also reloads TL0 with the contents of T H0 , which is preset by software. The reload leaves TH0 unchanged.  12 CORE CLK TF0 CO ...

  • Analog Devices ADuC812 - page 33

    REV. B ADuC812 –33– T2CON Timer/Counter 2 Control Register SFR Address C8H Power-On Default Value 00H Bit Addressable Yes 2 F T2 F X EK L C RK L C T2 N E X E2 R T2 T N C2 P A C Table XVIII. T2CON SFR Bit Designations Bit Name Description 7 TF2 Timer 2 Overflow Flag. Set by hardware on a timer 2 overflow. TF2 will not be set when either RCLK or ...

  • Analog Devices ADuC812 - page 34

    REV. B ADuC812 –34– Timer/Counter Operation Modes The following paragraphs describe the operating modes for t imer / counter 2. The operating modes are selected by bits in the T 2C O N SFR as shown in Table XIX. Table XIX. TIMECON SFR Bit Designations RCLK (or) TCLK CAP2 TR2 MODE 0 0 1 16-Bit Autoreload 0 1 1 16-Bit Capture 1 X 1 Baud Rate X X ...

  • Analog Devices ADuC812 - page 35

    REV. B ADuC812 –35– UART SERIAL INTERFACE T he serial port is full duplex, meaning it can transmit and receive simultaneously. It is also receive-buffered, meaning it can c om - mence reception of a second byte before a previously received byte has been read from the receive register. However, if the first byte still has not been read by the ti ...

  • Analog Devices ADuC812 - page 36

    REV. B ADuC812 –36– Mode 0: 8-Bit Shift Register Mode Mode 0 is selected by clearing both the SM0 and SM1 bits in t he S FR SCON. Serial data enters and exits through RXD. TXD outputs the shift clock. Eight data bits are transmitted or received. Transmission is initiated by any instruction that writes to SBUF. The data is shifted out of the RXD ...

  • Analog Devices ADuC812 - page 37

    REV. B ADuC812 –37– Timer 1 Generated Baud Rates When Timer 1 is used as the baud rate generator, the baud rates in Modes 1 and 3 are determined by the Timer 1 overflow rate a n d the value of SMOD as follows: Modes 1 and 3 Baud Rate = (2 SMOD /32) × ( Timer 1 Overflow Rate ) The Timer 1 interrupt should be disabled in this application. Th e T ...

  • Analog Devices ADuC812 - page 38

    REV. B ADuC812 –38– INTERRUPT SYSTEM The ADuC812 provides a total of nine interrupt sources with two priority levels. The control and configuration of the interrupt system is carried out through three Interrupt-related SFRs. IE: Interrupt Enable Register. IP: Interrupt Priority Register. IE2: Secondary Interrupt Enable Register. IE: Interrupt E ...

  • Analog Devices ADuC812 - page 39

    REV. B ADuC812 –39– IE2: Secondary Interrupt Enable Register SFR Address A9H Power-On Default Value 00H Bit Addressable No — — ——— — I M S P EI S E Table XXV. IE2 SFR Bit Designations Bit Name Description 7 — Reserved for Future Use. 6 — Reserved for Future Use. 5 — Reserved for Future Use. 4 — Reserved for Future Use. 3 — ...

  • Analog Devices ADuC812 - page 40

    REV. B ADuC812 –40– ADuC812 HARDWARE DESIGN CONSIDERATIONS This section outlines some of the key hardware design consider- ations that must be addressed when integrating the ADuC81 2 into any hardware system. Clock Oscillator The clock source for the ADuC812 can come either from an external source or from the internal clock oscillator. To use t ...

  • Analog Devices ADuC812 - page 41

    REV. B ADuC812 –41– If access to more than 64K bytes of RAM is desired, a feature unique to the ADuC812 allows addressing up to 16M bytes of external RAM simply by adding an additional latch as illus trated in Figure 39. LATCH ADuC812 RD P2 ALE P0 WR LATCH SRAM OE A8 – A15 A0 – A7 D0 – D7 (DATA) WE A16 – A23 Figure 39. External Data Mem ...

  • Analog Devices ADuC812 - page 42

    REV. B ADuC812 –42– As an alternative to providing two separate power supplies, t h e user can help keep AV DD quiet by placing a small series resistor and/or ferrite bead between it and DV DD , and then decoupling AV DD separately to ground. An e x a m p le o f t h is c o n figuration is shown in Figure 44 . With this configuration other analo ...

  • Analog Devices ADuC812 - page 43

    REV. B ADuC812 –43– Grounding and Board Layout Recommendations As with all high resolution data converters, special attention m ust be paid to grounding and PC board layout of ADuC81 2-based designs in order to achieve optimum performance from the ADCs and DAC. Although the ADuC812 has separate pins for analog and digital ground (AGND and DGND) ...

  • Analog Devices ADuC812 - page 44

    REV. B ADuC812 –44– C1+ V+ C1 – C2+ C2 – V – T2OUT R2IN V CC GND T1OUT R1IN R1OUT T1IN T2IN R2OUT ADM202 DV DD 27 34 33 31 30 29 28 39 38 37 36 35 32 40 47 46 44 43 42 41 52 51 50 49 48 45 DV DD 1k  DV DD 1k  2-PIN HEADER FOR EMULATION ACCESS (NORMALLY OPEN) DOWNLOAD/DEBUG ENABLE JUMPER (NORMALLY OPEN) 11.0592MHz DV DD 1 9-PIN D-SUB ...

  • Analog Devices ADuC812 - page 45

    REV. B ADuC812 –45– Note that the serial port debugger is fully contained on the ADuC812 device, (unlike “ROM monitor” type debuggers) and therefore no external memory is needed to enable in-system debug sessions. Single-Pin Emulation Mode Also built into the ADuC812 is a dedicated controller for single- pin in-circuit emulation (ICE) using ...

  • Analog Devices ADuC812 - page 46

    REV. B ADuC812 –46– (AV DD = DV DD = 3.0 V or 5.0 V  10%. All specifications T A = T MIN to T MAX unless otherwise noted.) 12 MHz Variable Clock Parameter Min Typ Max Min Typ Max Unit Figure CLOCK INPUT (External Clock Driven XTAL1) t CK XTAL1 Period 83.33 62.5 1000 ns 50 t CKL XTAL1 Width Low 20 20 ns 50 t CKH XTAL1 Width High 20 20 ns 50 t ...

  • Analog Devices ADuC812 - page 47

    REV. B ADuC812 –47– 12 MHz Variable Clock Parameter Min Max Min Max Unit Figure EXTERNAL PROGRAM MEMORY t LHLL ALE Pulsewidth 127 2t CK –4 0 n s 5 2 t AVLL Address Valid to ALE Low 43 t CK –4 0 n s 5 2 t LLAX Address Hold after ALE Low 53 t CK –3 0 n s 5 2 t LLIV ALE Low to Valid Instruction In 234 4t CK – 100 ns 52 t LLPL ALE Low to PS ...

  • Analog Devices ADuC812 - page 48

    REV. B ADuC812 –48– 12 MHz Variable Clock Parameter Min Max Min Max Unit Figure EXTERNAL DATA MEMORY READ CYCLE t RLRH RD Pulsewidth 400 6t CK – 100 ns 53 t AVLL Address Valid after ALE Low 43 t CK –4 0 n s 5 3 t LLAX Address Hold after ALE Low 48 t CK –3 5 n s 5 3 t RLDV RD Low to Valid Data In 252 5t CK – 165 ns 53 t RHDX Data and Add ...

  • Analog Devices ADuC812 - page 49

    REV. B ADuC812 –49– 12 MHz Variable Clock Parameter Min Max Min Max Unit Figure EXTERNAL DATA MEMORY WRITE CYCLE t WLWH WR Pulsewidth 400 6t CK – 100 ns 54 t AVLL Address Valid after ALE Low 43 t CK –4 0 n s 5 4 t LLAX Address Hold after ALE Low 48 t CK –3 5 n s 5 4 t LLWL ALE Low to RD or WR Low 200 300 3t CK –5 0 3 t CK +5 0 n s 5 4 t ...

  • Analog Devices ADuC812 - page 50

    REV. B ADuC812 –50– 12 MHz Variable Clock Parameter Min Typ Max Min Typ Max Unit Figure UART TIMING (Shift Register Mode) t XLXL Serial Port Clock Cycle Time 1.0 12t CK µ s5 5 t QVXH Output Data Setup to Clock 700 10t CK – 133 ns 55 t DVXH Input Data Setup to Clock 300 2t CK + 133 ns 55 t XHDX Input Data Hold after Clock 0 0 ns 55 t XHQX Out ...

  • Analog Devices ADuC812 - page 51

    REV. B ADuC812 –51– Parameter Min Max Unit Figure I 2 C-COMPATIBLE INTERFACE TIMING t L SCLOCK Low Pulsewidth 4.7 µ s5 6 t H SCLOCK High Pulsewidth 4.0 µ s5 6 t SHD Start Condition Hold Time 0.6 µ s5 6 t DSU Data Setup Time 100 ns 56 t DHD Data Hold Time 0 0.9 µ s5 6 t RSU Setup Time for Repeated Start 0.6 µ s5 6 t PSU Stop Condition Setup ...

  • Analog Devices ADuC812 - page 52

    REV. B ADuC812 –52– Parameter Min Typ Max Unit Figure SPI MASTER MODE TIMING (CPHA = 1) t SL SCLOCK Low Pulsewidth 330 ns 57 t SH SCLOCK High Pulsewidth 330 ns 57 t DAV Data Output Valid after SCLOCK Edge 50 ns 57 t DSU Data Input Setup Time before SCLOCK Edge 100 ns 57 t DHD Data Input Hold Time after SCLOCK Edge 100 ns 57 t DF Data Output Fal ...

  • Analog Devices ADuC812 - page 53

    REV. B ADuC812 –53– Parameter Min Typ Max Unit Figure SPI MASTER MODE TIMING (CPHA = 0) t SL SCLOCK Low Pulsewidth 330 ns 58 t SH SCLOCK High Pulsewidth 330 ns 58 t DAV Data Output Valid after SCLOCK Edge 50 ns 58 t DOSU Data Output Setup before SCLOCK Edge 150 ns 58 t DSU Data Input Setup Time before SCLOCK Edge 100 ns 58 t DHD Data Input Hold ...

  • Analog Devices ADuC812 - page 54

    REV. B ADuC812 –54– Parameter Min Typ Max Unit Figure SPI SLAVE MODE TIMING (CPHA = 1) t SS SS to SCLOCK Edge 0 ns 59 t SL SCLOCK Low Pulsewidth 330 ns 59 t SH SCLOCK High Pulsewidth 330 ns 59 t DAV Data Output Valid after SCLOCK Edge 50 ns 59 t DSU Data Input Setup Time before SCLOCK Edge 100 ns 59 t DHD Data Input Hold Time after SCLOCK Edge ...

  • Analog Devices ADuC812 - page 55

    REV. B ADuC812 –55– Parameter Min Typ Max Unit Figure SPI SLAVE MODE TIMING (CPHA = 0) t SS SS to SCLOCK Edge 0 ns 60 t SL SCLOCK Low Pulsewidth 330 ns 60 t SH SCLOCK High Pulsewidth 330 ns 60 t DAV Data Output Valid after SCLOCK Edge 50 ns 60 t DSU Data Input Setup Time before SCLOCK Edge 100 ns 60 t DHD Data Input Hold Time after SCLOCK Edge ...

  • Analog Devices ADuC812 - page 56

    REV. B –56– C00208–0–10/01(B) PRINTED IN U.S.A. ADuC812 OUTLINE DIMENSIONS Dimensions shown in inches and (mm). 52-Lead Plastic Quad Flatpack (S-52) TOP VIEW (PINS DOWN) PIN 1 1 40 52 26 27 13 14 39 SQ 0.557 (14.15) 0.537 (13.65) 0.398 (10.11) 0.390 (9.91) SQ 0.014 (0.35) 0.010 (0.25) 0.025 (0.65) BSC 0.082 (2.09) 0.078 (1.97) 0.012 (0.30) ...

Fabricante Analog Devices Categoría Computer Hardware

Los documentos del dispositivo Analog Devices ADuC812 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Analog Devices
- manuales de instrucciones ADuC812
- hojas de producto Analog Devices
- folletos informativos
- o etiquetas energéticas Analog Devices ADuC812
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Analog Devices ADuC812.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Analog Devices ADuC812, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Analog Devices ADuC812. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Analog Devices ADuC812.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Analog Devices ADuC812, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Analog Devices ADuC812. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Analog Devices ADuC812.

El manual de instrucciones completo de Analog Devices debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Analog Devices ADuC812 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Analog Devices ADuC812, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Analog Devices ADuC812 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Analog Devices ADuC812 - que deben facilitarnos los primeros pasos durante el uso de Analog Devices ADuC812
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Analog Devices ADuC812
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Analog Devices ADuC812 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Analog Devices ADuC812?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Analog Devices ADuC812, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Analog Devices ADuC812 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)