-
Dish Network DISH 625 - page 1
Page 23 Chapter 2 Receiver Description and Inst allation Receiver Front Panel Smart Card Door Behind this door is a slot for a future sm art card. No smart card is included with this receiver . Indicators • TV1 Power - The green light indicates th at the receiver is providing programming to the nearby TV through the TV1 output connections. • TV ...
-
Dish Network DISH 625 - page 2
Chapter 2 Page 24 Receiver Description and Installation Receiver Back Panel The receiver connections on the back panel are placed in three groups: • TV1 Connections - Use these connections with the nearby TV . • TV2 Connections - Use these connections with the remote TV(s). • Other Connections - Us e these conn ections w ith the dish antenna, ...
-
Dish Network DISH 625 - page 3
Page 25 Receiver Back Panel Digit al Audio Out The D IGITAL A UDIO O UTPUT is for use with high-quality digital sound decoding systems. Connect the D IGITAL A UDI O O UTPUT with a Digital Audio Optical cable (available at consum er electronics stores). TV Antenna/Cable In The TV A NTENNA /C ABLE I N is used if you want the satellite receiver to con ...
-
Dish Network DISH 625 - page 4
Chapter 2 Page 26 Receiver Description and Installation RCA Out The RCA aud io/video outputs provide high pictu re quality and stereo sound to your TV (if your TV ha s these connections). These outputs can be use d to provide TV2 menus and programming to a wireless audio/video transmitter or to a second input on a nearby TV . Use an RCA-type cable ...
-
Dish Network DISH 625 - page 5
Page 27 Remote Controls T ypes of Remote Controls Remote Control 1 uses infrared (IR) light signals to: • Control TV 1 menus for the nearby TV in Dual Mode . • Control the satellite receiver in Single Mode . IR signals travel only short distances (40 feet or less), and can not go through walls or other solid objects. Y ou must point the remote ...
-
Dish Network DISH 625 - page 6
Chapter 2 Page 28 Receiver Description and Installation Batteries The remote con trols come w ith AAA batter ies, which need to be installed when you first receive your system. When you replace old batteries, you should replace all of the batteries. Use batteries of the same kind, for example alkaline or carbon zinc, and don’ t mix batteries of d ...
-
Dish Network DISH 625 - page 7
Page 29 Connecting the Receiver to a Nearby TV Connecting the Receiver to a Nearby TV This section describes how to connect receiver TV 1 output ports to a nearby TV . The easiest way to connect the receiver to the TV is using coaxial cable connections, but you may also use RCA or S-Video outpu ts. Coaxial Cable Connections 1. Connect a coaxial cab ...
-
Dish Network DISH 625 - page 8
Chapter 2 Page 30 Receiver Description and Installation RCA and S-Video Connections (TV1) 1. Connect one of the following video cables: • RCA video cable (yellow) from the receiver TV1 outputs to the nearby TV’ s RCA video in put. • S-V IDEO cable from the receiver TV1 outputs to the nearby TV’ s S- V IDEO input. 2. Connect the RCA audio ca ...
-
Dish Network DISH 625 - page 9
Page 31 Connecting the Receiver to th e TV(s) in Another Room(s) Connecting the Receiver to the TV(s) in Another Room(s) This section describes how to connect the receiver CH 21–69 O UT connection to the cable-ready remote TV located in another room aw ay from the receiver . This installation uses your in-home cable syst em. If your house does no ...
-
Dish Network DISH 625 - page 10
Chapter 2 Page 32 Receiver Description and Installation 1. Connect the tuner input of the remote TV(s) in other rooms to an existing wall cable outlet using a coaxial cable. 2. T urn on every remote TV connected to the in-home cabling system. 3. Find three ch annels next to each other on one of your remote T Vs that do not pick up any signals from ...
-
Dish Network DISH 625 - page 11
Page 33 Connecting the Receiver to th e TV(s) in Another Room(s) 8. Connect CH 21-69 O UT on the receiver to your exist ing wall cable outl et using a coaxia l cable. Note : If you do not have an existing in-h ome cable system, you will need to run coaxial cable to each TV in other ro oms. If this is too difficult, you may want to contact a profess ...
-
Dish Network DISH 625 - page 12
Chapter 2 Page 34 Receiver Description and Installation 16. Y ou may need to change the cabl e connection on the splitter that sends the TV signal throughout you r house. The change that needs to be made is move the cable coming from the receiver CH 21-69 O UT from the output of the splitter to the input of the splitte r using the instructions that ...
-
Dish Network DISH 625 - page 13
Page 35 Connecting the Receiver to th e TV(s) in Another Room(s) 23. If desired to remind you of which TV channel your satellite pr ogramming is on, write the channel number you wrote in step 4 on a blank channel sticker and place it on or near your remote TV (s). The stickers are inside the front cover of this guide. 24. Confirm Remote Control 2 c ...
-
Dish Network DISH 625 - page 14
Chapter 2 Page 36 Receiver Description and Installation Programming the Recover Button Y our remote controls come equipped with a RECOVER button that helps you if you accidentally chang e the channel or video input on your remote TV and cannot get the picture back from your satellite receiver . When you press the RECOVER button as described on page ...
-
Dish Network DISH 625 - page 15
Page 37 Changing the TV1 and TV2 Output Channels Changing the TV1 and TV2 Output Channels The receiver comes preset to use channel 3 for TV1 and off-air channel 60 for TV2 . If you are experiencing interference on the channels you are using, follow these instructions to ch ange the channe l that TV1 or TV2 uses. 1. Press MENU-6-1-5 to open the Modu ...
-
Dish Network DISH 625 - page 16
Chapter 2 Page 38 Receiver Description and Installation Connecting the Recei ver to the Phone Line Keep the receiver connected to an active telephone line so you can orde r Pay- Per-View programs and use all of the dish home Intera ctive TV features, and other services from DISH Network. Note : Y ou may be able to use a wireless modem jack. However ...
-
Dish Network DISH 625 - page 17
Page 39 Connecting the Receiver to a Dish Antenna System Connecting the Receiver to a Dish Antenna System Note : Before you can begin connect ing your receiver to your dish antenna, you must first complete the preceding sec tions on connecting your TVs to the receiver . Then if you are installing a dish antenna system for the first time, see Chapte ...
-
Dish Network DISH 625 - page 18
Chapter 2 Page 40 Receiver Description and Installation 3. On Remote Control 1, press MENU-6-1-1 to display the Poin t Dish/Signal screen on the nearby TV . 4. Select Check Switch . When an attention screen displays, select Retest . 5. The receiver begins performing the Check Switc h tests. When it is finished, the Inst allation Summary screen disp ...
-
Dish Network DISH 625 - page 19
Page 41 Optional - Connecting VCRs to the System Optional - Connecting VCRs to the System The diagram below provide example o f how to connect VCRs to you r satellite TV system. Y our instal lation may be dif ferent. Connecting a VCR to the Nearby TV 1. Connect a coaxial cable from the CH 3-4 OUT output on the receiver to the nearby VCR’ s tuner ...
-
Dish Network DISH 625 - page 20
Chapter 2 Page 42 Receiver Description and Installation Connecting a VCR to the Remote TV For this installation, always leav e your VCR powered on so that the TV can receive satellite programming. If you turn of f your VCR, your TV will not be tuned to the correct chan nel to receive satellite programming. 1. Connect the tuner input of the remote V ...
-
Dish Network DISH 625 - page 21
Page 43 Optimize Y our Remote Controls Optimize Y our Remote Controls Change the Address When you receive your sy stem, both remote controls and t he receiver have been set to communicate on address 1. However , because UHF signals travel long distances and go through walls, a neighbor’ s UHF Pro remote could control your receiver by mistake if t ...
-
Dish Network DISH 625 - page 22
Chapter 2 Page 44 Receiver Description and Installation 6. Press the RECORD button. 7. Make sure the Secondary Remote Address you see on the System Info screen is the same as the one you entered in step 4. If it isn’t, the remote cannot control the receiver . 8. Press the SELECT button to close the Import ant System Information scre en. Checking ...
-
Dish Network DISH 625 - page 23
Page 45 Optimize Y our Remote Controls 1. T ake the UHF antenna off of the receiver ’ s back panel UHF Remote Antenna input 2. Put the attenuator onto the UHF Remote Antenna input. 3. Put the UHF antenna onto the attenuator . ...
-
Dish Network DISH 625 - page 24
Chapter 2 Page 46 Receiver Description and Installation Setting Up TV1 to Operate in UHF Pro Y ou can set your receiver to operate your TV1 using another UHF Pro remote control (sold separately) by comp leting the following instructions: 1. Perform the following using an existing remote control: a. Open the TV1 UHF Pro Setup screen by pressing MENU ...
-
Dish Network DISH 625 - page 25
Page 47 Setting Up TV1 to Operate in IR Setting Up TV1 to Operate in IR The following instructi ons describe how to set up TV1 to operate in IR only . 1. Perform the following with an existing remote control: a. Open the TV1 UHF Pro Setup screen by pressing MENU-6-1-8 on the remote control. b. Select Disable from the TV1 UHF Pro Setup screen. c. Se ...
-
Dish Network DISH 625 - page 26
Chapter 2 Page 48 Receiver Description and Installation Notes ...
¿Tienes una pregunta acerca de Dish Network DISH 625?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Dish Network DISH 625, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Dish Network DISH 625 probablemente compartirá una forma de solucionarlo.