-
Porter-Cable A08058-0412-0 - page 1
Instruction manual IMPORT ANT Please make certain that the person who is to use this equipment carefully reads and understands these instructions before starting operations. Part No. A08058 -0412-0 ® ESP AÑOL: PÁGINA 21 FRANÇAIS: P AGE 41 T o learn more about Porter-Cable visit our website at: http://www .porter -cable.com PCH3740 Copyright © ...
-
Porter-Cable A08058-0412-0 - page 2
2- ENG A08058 IMPORT ANT SAFETY INSTRUCTIONS Do not operate this unit until you have read and understand this Operators Manual and the Engine Owners Manual for Safety , Operation, and Maintenance Instructions. RISK OF EXPLOSION OR FIRE WHA T CAN HAPPEN HOW TO PREVENT IT • Spilled gasoline and it’ s vapors can become ignited from cigar ette spar ...
-
Porter-Cable A08058-0412-0 - page 3
3- ENG A08058 • Materials placed against or near the pressur e washer can interfere with its proper ventilation features causing overheating and possible ignition of the materials. • Never operate pressur e washer in an area containing dry brush or weeds. • Muffler exhaust heat can damage painted surfaces, melt any material sensitive to heat ...
-
Porter-Cable A08058-0412-0 - page 4
4- ENG A08058 • Contact with hot surfaces, such as engines exhaust components, could result in serious burn. • During operation, touch only the control surfaces of the pressur e washer . Keep children away fr om the pressure washer at all times. They may not be able to recognize the hazar ds of this product. • Spray directed at electrical out ...
-
Porter-Cable A08058-0412-0 - page 5
5- ENG A08058 • Reactive force of spray will cause gun/ wand to kickback, and could cause the op- erator to slip or fall, or misdirect the spray . Improper contr ol of gun/wand can result in injuries to self and others. • Do not overreach or stand on an unstable support. • Do not use pressur e washer while standing on a ladder . • Grip gun/ ...
-
Porter-Cable A08058-0412-0 - page 6
6- ENG A08058 ASSEMBL Y INSTRUCTIONS 1. Plac e ha ndl e as sem bly onto fr ame , dep re ss t he snap bu tton s, an d sl ide the han dle ass embl y on to t he f ram e un til sna p bu tto ns sn ap i nto place. CARTON CONTENTS Engine Frame and Wheel Assembly High Pressur e Hose Spray Gun Quick Connect Spray W and Handle Chemical Hose Bagged Parts Nozz ...
-
Porter-Cable A08058-0412-0 - page 7
7- ENG A08058 e. Make a loop in hose as shown. Place hose into hose clamp (3), squeeze hose clamp together , slide onto long screw post, and secure with nut (4). Tighten securely . NOTE: Do not overbend or kink hose. f. T ur n handle and reel hose onto reel. g. Attach hose reel inlet to high pressur e pump. 3. Assemb ly hose reel. a. Attach handle ...
-
Porter-Cable A08058-0412-0 - page 8
8- ENG A08058 5. Connect wand to gun . Tighten securely . 4. Atta ch high pr essure hose to gun . Tighten secur ely . 6. Place the nozzle holder onto the panel (located on the handle assembly) and push each nozzle holder into place. 7. Remove five colored quick connect nozzles from plastic bag and insert them into correct grommet on the nozzle hol ...
-
Porter-Cable A08058-0412-0 - page 9
9- ENG A08058 OPERA TING INSTRUCTIONS BASIC ELEMENTS OF A PRESSURE WASHER High Pressur e Pump : Increases the pressur e of the water supply . Engine: Drives the high pressur e pump. High Pressur e Hose: Carries the pressurized water fr om the pump to the gun and spray wand. Spray Gun: Connects with spray wand to control water flow rate, direction, ...
-
Porter-Cable A08058-0412-0 - page 10
10- ENG A08058 PRESSURE WASHER TERMINOLOGY PSI: Pounds per Square Inch. The unit of measure for water pr essure. Also used for air pressur e, hydraulic pressur e, etc. GPM: Gallons Per Minute. The unit of measure for the flow rate of water . CU: Cleaning Units. GPM multiplied by PSI. GPM x PSI = CU Bypass Mode: Allows water to re-cir culate within ...
-
Porter-Cable A08058-0412-0 - page 11
11- ENG A08058 The high pressur e spray from your pressur e washer is capable of causing damage to surfaces such as wood, glass, automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the item to be cleaned to assur e yourself that it is strong enough to r esist damage from the force of th ...
-
Porter-Cable A08058-0412-0 - page 12
12- ENG A08058 HOW TO APPL Y CHEMICALS AND CLEANING SOL VENTS Applying chemicals or cleaning solvents is a low pressur e operation. NOTE: Use only soaps and chemicals designed for pressur e washer use. Do not use bleach. T o Apply chemicals: 1. Press chemical hose onto barbed fitting located near high pressur e hose connection of pump as shown. 2. ...
-
Porter-Cable A08058-0412-0 - page 13
13- ENG A08058 ST ARTING Prior to starting, refer to your engine manual for proper starting procedur e. 1. In a well ventilated outdoor area add fresh, high quality , unleaded gasoline with a pump octane rating of 86 or higher . Do not overfill. Wipe up spilled fuel before starting the engine. Refer to Engine Owners Manual for correct procedur e. ...
-
Porter-Cable A08058-0412-0 - page 14
14- ENG A08058 MAINTENANCE When performing maintenance, you may be exposed to hot surfaces, water pressur e, or moving parts that can cause serious injury or death! Before performing any maintenance or repair , disconnect spark plug wire, let engine cool and r elease all water pressur e. The engine contains flammable fuel. DO NOT smoke or work nea ...
-
Porter-Cable A08058-0412-0 - page 15
15- ENG A08058 NOZZLE CLEANING If the nozzle becomes clogged with foreign materials, such as dirt, excessive pressur e may develop. If the nozzle becomes partially clogged or restricted, the pump pr essure will pulsate. Clean the nozzle immediately using the nozzle kit supplied and the following instructions: 1. Shut off the pr essure washer and tu ...
-
Porter-Cable A08058-0412-0 - page 16
16- ENG A08058 1. Obtain a funnel , six ounces of *RV antifr eeze, and 16 - 36 inches of garden hose with a male hose connector attached to one end. Use only RV antifreeze. Any other antifreeze is corr osive and can damage pump. 2. Disconnect spark plug wire. 3. Connect length of garden hose to water inlet of pump. 4. Add *RV antifr eeze to hose as ...
-
Porter-Cable A08058-0412-0 - page 17
17- ENG A08058 TROUBLE SHOOTING GUIDE PROBLEM Engine will not start (see Engine Manual for further engine troubleshooting) No or low pressur e (initial use) CAUSE CORRECTION No fuel. Add Fuel. Pressur e builds up after two pulls on the recoil starter or after initial use. Squeeze gun trigger to relieve pressur e. Spark plug wire not attached. Attac ...
-
Porter-Cable A08058-0412-0 - page 18
18- ENG A08058 W ater leaking at pump W ater leaking at gun/ spray wand connection No or low pressur e (after period of normal use) PROBLEM CAUSE CORRECTION Spray wand not in low pressure. See How to Use Spray W and paragraph in the Operation Section. Chemical screen not in cleaning solution. Clean filter . Chemical too thick. Dil ute ch emic al. C ...
-
Porter-Cable A08058-0412-0 - page 19
19- ENG A08058 NOTES ...
-
Porter-Cable A08058-0412-0 - page 20
20- ENG A08058 LIMITED W ARRANTY PORTER-CABLE CORPORA TION warrants to the original purchaser that all products covered under this warranty are free from defects in material and workmanship. Products covered under this warranty include air compressors, air tools, service parts, pressure washers, and generators, which have the following warranty per ...
¿Tienes una pregunta acerca de Porter-Cable A08058-0412-0?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Porter-Cable A08058-0412-0, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Porter-Cable A08058-0412-0 probablemente compartirá una forma de solucionarlo.