-
Sunbeam FA7500 - page 1
Please read these instructions carefully and retain for future reference. Instruction Booklet Sunbeam Brushed Remote Control T ower Fan F A7500 120cm Brushed Remote Control T ower Fan sun_7500.indd 1 8/07/2008 18:26:06 ...
-
Sunbeam FA7500 - page 2
Contents Sunbeam’ s Safety Precautions 1 Safety Precautions For Y our T ower Fan 2 Locating Y our T ower Fan 3 Features Of Y our Sunbeam T ower Fan 4 Assembling Y our T ower Fan 6 Using Y our T ower Fan 8 T roubleshooting Guide 12 Care And Cleaning 12 sun_7500.indd 2 8/07/2008 18:26:21 ...
-
Sunbeam FA7500 - page 3
Sunbeam’ s Safety Precautions Sunbeam are very safety conscious when designing and manufacturing consumer prod- ucts, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance: Read carefully and save all the instruc ...
-
Sunbeam FA7500 - page 4
If you have any concerns regarding the performance and use of your appliance, please visit www .sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. Safety Precautions For Y our T ower Fan Important Instructions - Retain For Future Use Do not use outdoors. Do not run the cord of the fan un ...
-
Sunbeam FA7500 - page 5
Locating Y our T ower Fan 3 Always locate your fan on a fl at level surface. Y our tower fan should be located in a dry , cool, well ventilated location. Keep your fan away from heat sources, corrosive gases and avoid direct sunlight. Do not attempt to move your tower fan whilst it is operating. If your fan needs to be moved, please ensure that it ...
-
Sunbeam FA7500 - page 6
Features Of Y our Sunbeam T ower Fan 4 Control panel The easy to read control panel allows you to quickly see what functions have been selected on your tower fan. Remote control storage When not in use, store your remote control in the handy storage compartment on the rear of the fan body . Power button Simply press the power button to turn the uni ...
-
Sunbeam FA7500 - page 7
5 Auto Off button The auto off timer allows you to set your tower fan to turn off after either 2, 4 or 8 hours. Fan speed button Choose from 3 speed settings, low medium or high. Oscillation Y our tower fan oscillates 70°, distributing cool air throughout the room. Nature mode When used in nature mode, the fan speed is randomly adjusted, giving th ...
-
Sunbeam FA7500 - page 8
Assembling Y our T ower Fan 6 Remove the screws from beneath the tower Using a phillips head screwdriver , remove the 6 screws from underneath the tower . Put the screws aside. Y ou will need them to secure the base. 1. 2. Lower the tower onto the base Feed the cord through the hole in the centre of the base. Align the tower so that the lug on the ...
-
Sunbeam FA7500 - page 9
Assembling Y our T ower Fan (continued) 7 Screw the tower to the base Use the 6 screws you put aside earlier to secure the tower to the base. Clip the cord into place Feed the cord along the channel underneath the base. Screw the cord into the edge of the base using the two screws provided. Stand the fan upright. It is now ready for use. 1. 2. 3. s ...
-
Sunbeam FA7500 - page 10
Using Y our T ower Fan 8 Switching the fan on Place the fan on a fl at level surface. Insert the plug into a 230/240V power outlet and turn the power on. Press the power button . Press the fan speed button to select low , medium or high depending on your preference. 1. 2. 3. 4. Switching the fan off T o switch the fan off, simply press the power b ...
-
Sunbeam FA7500 - page 11
Using Y our T ower Fan (continued) 9 Using the remote control Remove the remote control from its compart- ment at the rear of the tower as shown. Point the remote towards the control panel on the front of the tower to operate. 1. 2. Changing the batteries Slide the rear cover off the remote control unit. Replace the spent batteries with 2 fresh LR4 ...
-
Sunbeam FA7500 - page 12
Using Y our T ower Fan (continued) 10 Using the auto off timer The auto off timer automatically switches the fan off after a preset number of hours. T o activate this feature, simply press the auto off button on the tower or on the remote control unit. Press the auto off button once to switch the fan off after 2 hours. The timing light on the tower ...
-
Sunbeam FA7500 - page 13
Using Y our T ower Fan (continued) 11 Nature mode Nature mode provides an extra level of comfort by simulating the natural rise and fall of the wind over time. Y ou can use this mode on any fan speed setting. T o use Nature mode: Choose a fan speed. Press the button on either the fan or the remote. The button will illuminate. The fan will now vary ...
-
Sunbeam FA7500 - page 14
12 Care And Cleaning Ensure that your fan is switched off and disconnected from the power outlet before cleaning. Carefully wipe your fan using a clean cloth. Do not use abrasive cleaners or brushes to clean the appliance as these may scratch the surface. • • T ake care that excessive dust does not build up in the air -intake and air -outlet gr ...
-
Sunbeam FA7500 - page 15
W e are so con fi dent of the quality of our product, should this appliance develop any malfunction within 2 years of purchase (3 Months commercial use) due to faulty materials or manufacture, we will replace it for you absolutely free. 2 Y ear Replacement Guarantee Should you experience any dif fi culties with your appliance, please phone our fr ...
-
Sunbeam FA7500 - page 16
Consumer Hotline is a registered T rademark of Sunbeam. In Australia V is i t www .s u n be am . co m .a u Or ca l l 1 300 88 1 86 1 In New Zealand V is i t www .s u n be am . co . n z Or ca l l 080 0 7 86 2 3 2 Ma de in C hina . Due to minor changes in design or otherwise, the product may differ from the one shown in this lea fl et. © Copy right ...
¿Tienes una pregunta acerca de Sunbeam FA7500?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Sunbeam FA7500, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Sunbeam FA7500 probablemente compartirá una forma de solucionarlo.