-
Aastra BE-3872 - page 1
MO DE L: B E-38 7 2 2.4 G H Z CO R D L E SS T E L E PH O N E Please read this manual carefully prior to using the telephone. 600-1590702-A INST ALLA TION AND OPERA TING GUIDE 16 ...
-
Aastra BE-3872 - page 2
This symbol is to alert you to important operating or servicing instructions that may appear in the user's manual. Always f ollow basic safety precautions when using this product to reduce the risk of injury , fire, or electrical shock. When using this product, basic safety precautions should always be f ollowed to reduce the risk of fire, ele ...
-
Aastra BE-3872 - page 3
6. Programming/testing emergency numbers: When programming emergency numbers and/or making test calls to emergency numbers A. Remain on the line and briefly explain to the dispatcher the reason f or the call before hanging up . B. P erform such activities in the off-peak hours, such as early mor ning or late ev ening. INTERFERENCE INFORMA TION: P A ...
-
Aastra BE-3872 - page 4
B E-3 8 7 2 P A R T S C H E C K L I S T 6 In Use/ L o w Batt. Mute MEM 2.4 GHz 8 7 1. Handset 2. Base 3. A C p o w er adapter 6. Qui c k sta r t card 5. 7- f oot line cord f or desk use QU I C K S T A R T GUI D E B E-3 8 7 2 1. Install a 9V ba c kup batte r y into the batte r y compa r tment, located on the base bottom. 2. Connect the telephone lin ...
-
Aastra BE-3872 - page 5
1. V olume Up/Down Ke y The key lets you adjust the handset v olume. 2. In Use/Low Battery LED Lights (red) when line is in use. Flashes quickly when the phone rings. Flashes steadily when the phone is muted. Flashes slowly when the battery is low . 3. T alk T The T key is used to access the telephone line or end a call. 4. T emporary ...
-
Aastra BE-3872 - page 6
7. New Message LED Flashes when new messages ha ve been left on the ans wering machine. 8. T wo Digit Counter Display Displays the n umber of messages stored in the answering machine. Also displays v arious other information about the base and answering machine. 9. Stop Key Any current function, such as pla yback, can be halted by pressing this k e ...
-
Aastra BE-3872 - page 7
Do the follo wing: • Choose the best location • Connect the phone • Choose the dialing mode Where you place the phone aff ects the reception quality of the handset: • A way from another cordless telephone • Place the base near an AC electrical outlet and near telephone line jac k • Place the base aw ay from metal walls and metal file ca ...
-
Aastra BE-3872 - page 8
T one/Pulse Switch 1. Select the dialing mode, either T one or Pulse, b y setting the switch on the bottom of the base unit. Note: Changes to the switch position during a call do not take aff ect until the call has ended. Tip: If you are unsure of the proper dialing mode, make a trial call with the switch set to T one . If the call connects, leave ...
-
Aastra BE-3872 - page 9
The Data Jack The jack located on the side of the telephone labeled "D A T A" is a conv enience jack. It is useful f or connecting a fax machine or modem when there is no telephone jack a vailable f or that device . The Headset Jack The headset jack is located on the side of the handset and is a standard 2.5mm plug. Simply plug the headse ...
-
Aastra BE-3872 - page 10
The BE-3872 will store up to 10 speed dial numbers. Storing Phone Numbers 1. With the handset in the idle state, press l . The phone will beep and the IN USE LED will flash. 2. Dial the number you wish to store (up to 16 digits). Note: Press R to inser t a dialing pause into the number . The pause lasts for 4 seconds and uses one digit of the 16 di ...
-
Aastra BE-3872 - page 11
Setting the Ring Count The ring count setting will prompt the BE-3872 to pick up an incoming call with the answ er ing machine after 2, 4, or TS (tollsav er 2/4) r ings. There is a ringer switch on the bottom of the base; adjust this switch to the n umber of r ings that you desire . 2R: The unit will pick up after two rings. 4R: The unit will pick ...
-
Aastra BE-3872 - page 12
Setting the Announce Mode There are three different ans wering modes that the BE-3872 can be set to: normal (ICM) answering mode, ans wer only mode, and ans wer off. Setting the Answering System Off: When the answ er ing machine is set off, the ans wering system will not pick up until the phone rings 10 times. At that point, the BE-3872 is automati ...
-
Aastra BE-3872 - page 13
Answering Calls with Ans wer On T o avoid unnecessary pauses due to hangups, and to sav e message capacity , your unit will automatically stop recording after se ven seconds of silence. 1. When there is an incoming call the announcement will star t. 2. After the announcement plays the BE-3872 will beep indicating that the caller can record his/her ...
-
Aastra BE-3872 - page 14
Deleting Messages Messages will be sav ed unless you delete them. T o delete a single message: 1. While a message is playing, press [ Erase ]. The BE-3872 announces "Message [message number] erased." 2. The BE-3872 will announce the next message number and pla y the next message or , if the message was the last one, announce “ End of me ...
-
Aastra BE-3872 - page 15
Remote Access The BE-3872 provides se veral remote functions , which allow you to access the answ er ing system functions from any touchtone telephone. The remote function is ONL Y recognized after a correct remote access code is received. 1. When the BE-3872 answers, after the outgoing message has finished, press * and then enter your two digit re ...
-
Aastra BE-3872 - page 16
No dial tone/phone will not dial out. • Check that the A C power adapter is plugged into a working A C power outlet. • Check all telephone cord connections or try another wall jack. • Do a basic reset of the phone: Disconnect the phone from the wall and remov e the batter y . Leave f or 30 minutes and then re-install as instructed by the manu ...
-
Aastra BE-3872 - page 17
Y our BE-3872 telephone has been designed to give y ears of trouble-free service. It is a sensitive electronic instrument. T o assure its longevity , please read the follo wing maintenance instructions. 1. Keep the BE-3872 aw ay from heat as high temperatures can shorten the life of the electrical components and distor t or melt its plastic par ts. ...
-
Aastra BE-3872 - page 18
34 For Support, Please Call 888-663-1505 Place this template on the wall. The location of the screws is indicated by the centers of the crossed lines . F asten the screws lea ving 3/16 ” of the screw e xtending from the wall. Remove This Pa ge to Mark Wall 33 W ALL M OUNT TE MPL A TE Expansion Anchor #6 or #8 Pan Head Self Tapping Screw Screws ne ...
¿Tienes una pregunta acerca de Aastra BE-3872?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Aastra BE-3872, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Aastra BE-3872 probablemente compartirá una forma de solucionarlo.