-
Silex technology SDZ-330 - page 1
P/No. : Z6806-0618-01B VAN 05. 09 www.samsungtechwin.com www.samsungcctv.com • SAMSUNG TECHWIN CO., LTD. 145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do 462-703, Korea TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145 • SAMSUNG OPTO-ELECTRONICS AMERICA,INC. ELECTRONIC IMAGING DIV. 40 Seaview Drive, Secaucus, NJ 07094, U.S.A TEL : ...
-
Silex technology SDZ-330 - page 2
This installation should be made by a qualified service person and should conform to all local codes. The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute ...
-
Silex technology SDZ-330 - page 3
W arning The camera requires regular maintenance. Contact an authorized technician for maintenance and/or servicing. Do not continue to use if malfunctioning. Prolonged use of the camera in abnormal operating conditions (produces smoke, overheats, etc.) may result in a fire. Do not Install the camera on a surface that can not support it. Installati ...
-
Silex technology SDZ-330 - page 4
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 7 6 Top Bottom Back 8 Connecting To Monitor Connecting To Power Connecting To Connection P recautions 10 C omponents and Accessories 11 14 15 16 12 11 13 O verview Menu Configuration Menu Setup • CAM TITLE • WHITE BALANCE • BACKLIGHT • MOTION DETECTION • FOCUS • EXPOSURE ...
-
Silex technology SDZ-330 - page 5
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 9 8 Do not install under extreme temperature conditions. Use only under temperature conditions between -10˚C and +50˚C. Provide good ventilation when using in high temperature conditions. Do not install in high humidity environment. May lower image quality. Do not install under uns ...
-
Silex technology SDZ-330 - page 6
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 11 10 1. 30x Zoom Color Camera SDZ-330 2. Instruction Manual 3. 6-Pin Connection Cable 5. Remote Controller (Optional) Top Tripod Mounting Bracket Screw Hole Used to fix tripod mounting bracket on top of the camera. Front Cover Ring Removable for replacement with a filter. Components ...
-
Silex technology SDZ-330 - page 7
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 13 12 Bottom Overview Back Tripod Mounting Hole Used to install the camera on an optional tripod. The tripod must be equipped with screws with specifications shown on the right. Key Buttons · Following buttons control zoom, focus, and auto focus functions. WIDE button : To widen the ...
-
Silex technology SDZ-330 - page 8
COLOR CCD CAM ERA User’s Manual 15 COL OR CCD CAM ERA User’s Manual 14 External Control Connector Relates to the motion detection output signal. Zoom and focus functions can be controlled using external siganals. Power LED Illuminates when power is supplied. Video Output Jack Used to connect an external video monitor in jack. Communication Cont ...
-
Silex technology SDZ-330 - page 9
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 17 16 Connection Connecting to connection FOCUS (Input) ZOOM (Input) COM MD (output) External Control Connector Communication Control Connector Connector Signal Level I / O Function * Communication Control Connector Pin Description . * EXT. SYNC * MD (Motion Detection) Output Signal ...
-
Silex technology SDZ-330 - page 10
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 19 18 Menu Configuration MAIN SETUP MENU CAM TITLE • OFF • ON WHITE BAL. • ATW • AWC • MANUAL BACKLIGHT • OFF • WDR MOTION DET. • OFF • ON FOCUS • MODE • ZOOM TRK MODE • ZOOM TRK SPD • D-ZOOM • DISP ZOOM MAG • ZOOM INIT POS • LENS INIT • END EXPOSURE ...
-
Silex technology SDZ-330 - page 11
COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 21 20 Operating Y our Camera 3. Change the status of the selected feature using the LEFT or RIGHT button. 4. When completed, move the arrow indicator to 'EXIT' and press the SET button. Use this feature to designate a name for the camera, which will display on the monitor s ...
-
Silex technology SDZ-330 - page 12
Operating Y our Camera COLOR CCD CAM ERA User’s Manual 23 COL OR CCD CAM ERA User’s Manual 22 5. Select on screen position of the CAM TITLE. Move the cursor to 'POS' and press SET button. The CAM TITLE is displayed on the top-left of the monitor screen. (Default position) Select the position by using the 4-directional buttons, then pr ...
-
Silex technology SDZ-330 - page 13
Operating Y our Camera COLOR CCD CAM ERA User’s Manual 25 COL OR CCD CAM ERA User’s Manual 24 • Proper White Balance may not be obtained under the following conditions. When the scene contains mostly high color temperature object, such as a blue sky or sunset. When the scene is dim. If your camera directly faces a fluorescent lamp or is used ...
-
Silex technology SDZ-330 - page 14
Operating Y our Camera COLOR CCD CAM ERA User’s Manual 27 COL OR CCD CAM ERA User’s Manual 26 Increase or decrease detection sensitivity by setting the 'SENSITIVITY' value. Press the SET button. Tips on Using the Motion Detection Feature • Once the sensitivity level has been set, perform a test to verify proper operation of the feat ...
-
Silex technology SDZ-330 - page 15
Operating Y our Camera COLOR CCD CAM ERA User’s Manual 29 COL OR CCD CAM ERA User’s Manual 28 ZOOM TRK SPD: Configure zoom tracing speed using this feature. Position the indicator over 'ZOOM TRK SPEED' using the UP or DOWN button and then set to desired mode using the LEFT or RIGHT button. ZOOM TRK MODE: You can select to use ‘ZOOM ...
-
Silex technology SDZ-330 - page 16
Operating Y our Camera COLOR CCD CAM ERA User’s Manual 31 COL OR CCD CAM ERA User’s Manual 30 LENS INIT : Use this feature to initialize the lens. Position the indicator over LENS INIT. using the UP or DOWN button. Press the SET button to confirm. END: To revert to the main setup menu. EXPOSURE 1. Press the SET button to access the main setup m ...
-
Silex technology SDZ-330 - page 17
Operating Y our Camera COLOR CCD CAM ERA User’s Manual 33 COL OR CCD CAM ERA User’s Manual 32 IRIS: Set 'IRIS' to 'AUTO' or 'MANUAL'. Position the indicator over 'IRIS' using the UP or DOWN button and then select the desired iris mode using the LEFT or RIGHT button. •AUTO: The iris is automatically acti ...
-
Silex technology SDZ-330 - page 18
Operating Y our Camera COLOR CCD CAM ERA User’s Manual 35 COL OR CCD CAM ERA User’s Manual 34 1. Position the indicator over 'AGC' using the UP or DOWN button. 2. Set 'AGC' to the desired mode using the LEFT or RIGHT button. • HIGH : Wide range gain value adjustment • MIDDLE : Middle range gain value adjustment • LOW : ...
-
Silex technology SDZ-330 - page 19
Operating Y our Camera COLOR CCD CAM ERA User’s Manual 37 COL OR CCD CAM ERA User’s Manual 36 1. Press the SET button to access the main setup menu and then position the indicator over 'SPECIAL' using the UP or DOWN button. 2. Press the SET button to confirm. USER PRESET : Preset user-designated configurations using this feature. Posi ...
-
Silex technology SDZ-330 - page 20
Operating Y our Camera COLOR CCD CAM ERA User’s Manual 39 COL OR CCD CAM ERA User’s Manual 38 • PRESET SAVE: Save configured preset. • PRESET CLEAR : Clear configured preset. • END : Revert to the SPECIAL SETUP menu. • GROUP SEL : Choose up to four groups. Each group can consist of eight mask areas. • MASK COLOR : Select desired mask ...
-
Silex technology SDZ-330 - page 21
Operating Y our Camera COLOR CCD CAM ERA User’s Manual 41 COL OR CCD CAM ERA User’s Manual 40 DAY/NIGHT: Select from COLOR, BW or AUTO modes. • COLOR : Color mode. • B/W : BW mode. • AUTO : The camera automatically detects lighting conditions and selects the mode accordingly. • For NTSC models, the line-lock mode can be used if the exte ...
-
Silex technology SDZ-330 - page 22
Operating Y our Camera COLOR CCD CAM ERA User’s Manual 43 COL OR CCD CAM ERA User’s Manual 42 V-REV : Use this feature to vertically inverse the screen. Position the indicator over 'V-REV' using the UP or DOWN button and then set to 'ON' using the LEFT or RIGHT button. Press the SET button to confirm. IMAGE ADJ: Includes ima ...
-
Silex technology SDZ-330 - page 23
T roubleshooting COLOR CCD CAM ERA User’s Manual 45 COL OR CCD CAM ERA User’s Manual 44 Refer to the following table if you are experiencing trouble with your camera. Contact an authorized technician if the table does not provide you with a solution to the trouble. Problem No display Dim display Dark display The camera is not functioning proper ...
-
Silex technology SDZ-330 - page 24
COLOR CCD CAM ERA User’s Manual 47 COL OR CCD CAM ERA User’s Manual 46 Specifications Input Voltage Input Current Power Consumption Size Total Pixels Effective Pixels Optics Min. Focus Distance D. ZOOM Angle Field of view Scanning System Synchronization Frequency Camera Title Camera ID Resolution Video Output S/N (Y signal) Min. Illumination WD ...
-
Silex technology SDZ-330 - page 25
Protocol Command Description COLOR CCD CAM ERA User’s Manual 49 COL OR CCD CAM ERA User’s Manual 48 Byte1 Byte2 Byte3 Byte4 || Byte5 Byte6 Byte7 Byte8 Byte9 Byte10 Byte11 Function Execution Description. Command Packet STX CAM ID HOST ADDR Command Data3 Data4 Data5 Data6 ETX CHECK SUM Return Packet STX CAM ID HOST ADDR Response Data3 Data4 Data5 ...
-
Silex technology SDZ-330 - page 26
Protocol Command Description COLOR CCD CAM ERA User’s Manual 51 COL OR CCD CAM ERA User’s Manual 50 Parameter P1: 00h = USER PRESET 1 01h = USER PRESET 2 02h = USER PRESET 3 03h = USER PRESET 4 04h = USER PRESET 5 05h = USER PRESET 6 06h = USER PRESET 7 07h = USER PRESET 8 Function Execute selected user preset. Command Packet A0h CAM ID HOST AD ...
-
Silex technology SDZ-330 - page 27
Protocol Command Description Function Move OSD arrow to down. Command Packet A0h CAM ID HOST ADDR 0010h 00h 00h 00h 00h AFh CHECK SUM Return Packet A0h CAM ID HOST ADDR 0010h 00h 00h 00h 00h AFh CHECK SUM Function Move OSD arrow to left. Command Packet A0h CAM ID HOST ADDR 0004h 00h 00h 00h 00h AFh CHECK SUM Return Packet A0h CAM ID HOST ADDR 0004h ...
-
Silex technology SDZ-330 - page 28
DECLARA TION OF CONFORMITY Application of Council Directive(s) 89 / 336 / EEC Manufacturer's Name SAMSUNG TECHWIN CO., LTD Manufacturer's Address SAMSUNG TECHWIN CO., LTD 42, SUNGJU-DONG CHANGWON-CITY, KYUNGNAM, KOREA, 641-120 European Representative Name European Representative Address Equipment Type/Environment CCTV Camera Model Name SD ...
¿Tienes una pregunta acerca de Silex technology SDZ-330?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Silex technology SDZ-330, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Silex technology SDZ-330 probablemente compartirá una forma de solucionarlo.