-
Jumpking JTR6 - page 1
PRODUCT MODEL JTR6 Round 6' Diameter T rampoline Users Manual ASSEMBLY, SAFETY, CARE AND MAINTENANCE, USE, AND INSTRUCTIONAL MATERIALS ENCLOSED. WARNING: USING THIS TRAMPOLINE EXPOSES YOU TO THE RISK OF SERIOUS INJURY, INCLUDING PERMANENT PARALYSIS OR EVEN DEATH FROM LANDING ON THE BACK, NECK OR HEAD. THIS RISK EXISTS EVEN IF YOU LAND ON THE T ...
-
Jumpking JTR6 - page 2
Page W ARNING All Jumpking trampolines come equipped with important information regarding proper assembly, usage and safety procedures. This information must be read by all supervisors and trampoline users before allowing any person to jump on a trampoline. 2 Jumpking, Inc. Limited Trampoline Warranty Jumpking, Inc. (Jumpking) warrants its trampoli ...
-
Jumpking JTR6 - page 3
Page 3 BEFORE YOU BEGIN Thank you for selecting a Jumpking Trampoline. The Jumpking Trampoline is designed and crafted to provide you and your family with many years of fun and fitness. For your benefit and safety, read this manual carefully before using this trampoline. If you have additional questions, please call our Customer Service Department, ...
-
Jumpking JTR6 - page 4
Page Lay out all frame sections in a circle (See Fig. 1). The frame sections consist of 3 components: Top rail - 4 pieces (part no. JTR6TR) Top rail with leg sockets - 4 pieces (part no. JTR6TRS) Leg base - 4 pieces (part no. JTR6L) These are all interchangeable and have no “left hand” or “right hand” orientation. All connections consist of ...
-
Jumpking JTR6 - page 5
Page Step 3: 5 After the metal frame has been assembled it must be turned over so the base of the legs is in contact with the assembly surface. Stand outside the frame circle and lift one edge of the top rail to a vertical position. The frame is now like a coin on edge with the legs facing away from you. Rotate the frame until the legs face you and ...
-
Jumpking JTR6 - page 6
Page Step 5: Lay the jumping mat (bed) (part no. JTR6B) inside the frame. Springs are used to support the mat (bed) and are connected between “V” rings on the mat (bed) and holes in the top frame rail. There are 48 “V” rings on the mat (bed) that have to line up with corresponding holes on the top frame rail. These are not numbered. To make ...
-
Jumpking JTR6 - page 7
Page Step 7: To install the rest of the springs, follow the above procedures in the following steps: a. Attach springs every 6 holes/”V” rings (springs now at 6, 18, 30, 42). b. Attach springs every 3 holes/”V” rings (springs now at 3, 9, 15, 21, 27, 33, 39, 45). c. You now have a two spring gap between the installed springs. Install one sp ...
-
Jumpking JTR6 - page 8
Page CARE AND MAINTENANCE Your trampoline is manufactured using quality materials and is finely-crafted to provide you and your family with many years of enjoyment and exercise. Proper maintenance and care will help to prolong the life of the trampoline and reduce the possibility of injury. The following guidelines should always be observed. 1. Ins ...
-
Jumpking JTR6 - page 9
Page TRAMPOLINE SAFETY SAFETY PRECAUTIONS 1. When used indoors or outdoors, ensure adequate horizontal and vertical (overhead) clearance from electric power wiring, tree limbs, ceilings, furniture, and other possible hazards. 2. The trampoline must be placed on a level surface before use. Place on carpet when used indoors. Place on grass when used ...
-
Jumpking JTR6 - page 10
Page OWNER’S ROLE IN PREVENTING ACCIDENTS The supervisor or owner must teach the fundamentals, supervise the users, and enforce the rules. Strict supervision and enforcement of the rules will help minimize the likelihood of accidents or injuries. The supervisor must be in direct charge of any activity on the trampoline. Nearly every activity has ...
-
Jumpking JTR6 - page 11
Page BASIC JUMPING TECHNIQUE 11 FUNDAMENT AL BOUNCE 1. Start from standing position with head erect and eyes on mat. 2. Swing arms forward and up in a circular motion. 3. Bring feet together and point toes downward while in the air. 4. Keep feet about 15 inches apart when landing on mat. ...
-
Jumpking JTR6 - page 12
Page Exploded Drawing and Part List for Model JTR6, Round 6' Diameter T rampoline. Replacement Parts Drawing Needed Reference Part Number Quantity Description Number JTR6B ( 1) 5'-6''dia. bed stitched w/48 V-rings (1) JTR6PW ( 1) 8" wide frame pad (2) JTR6S (48) set of 48, 5-1/2" galvanized springs (3) JTR6TRS ( 4) top ...
-
Jumpking JTR6 - page 13
Page ORDERING REPLACEMENT P ARTS Replacement parts can be ordered by calling our Customer Service Department, toll-free, at 1-800-322-2211, Monday through Friday, 8 a.m. until 5 p.m. Central Time (excluding holidays). When ordering parts, please be prepared to give the following information: 1. The NAME and MODEL NUMBER OF THE PRODUCT (Jumpking tra ...
-
Jumpking JTR6 - page 14
Page ORDER FORM Name:____________________________________________________________________________________________________ Street : _____________________________________________________________________________________________ City: ___________________________________ State: __________________ Zip: _____________ Home Phone #: ( ) Business Phone # ( ) ...
-
Jumpking JTR6 - page 15
Page 15 NOTES: ...
-
Jumpking JTR6 - page 16
Page 20 (Optional) 2nd Day UPS Charge _____________ TOTAL ENCLOSED $ _____________ You may order by phone with a credit card by dialing 1-800-322-2211; ask for Retail Sales Office. Jumpking, Inc. 901 W. Miller Road Garland, Texas 75041 800-322-2211 As a manufacturer, we are committed to providing you complete customer satisfaction. If you have ques ...
¿Tienes una pregunta acerca de Jumpking JTR6?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Jumpking JTR6, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Jumpking JTR6 probablemente compartirá una forma de solucionarlo.