-
Jensen JTA-450 - page 1
JTA-450 3-SPEED STEREO TURNTABLE WI TH MP3 ENCODING AND AM/FM STEREO RADIO INSTRUCTION MANUAL PLEASE READ THIS OPERATING MANUAL COMP LETELY BEFORE OPERATI NG THIS UNIT AND RETAIN IT FOR FUTURE REFERENCE. ...
-
Jensen JTA-450 - page 2
1 IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF F IRE OR ELECTRIC S HOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGE ROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CA BINET REFER SERVICING TO QUALIF IED PERSONNEL ONLY. CAUTION: PLEASE READ AND OBSERVE ALL W ARNINGS AND IN STRUCTIO NS GIVEN IN THIS O ...
-
Jensen JTA-450 - page 3
2 7. Do not block any of the ventilation openings. I nstall in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, s toves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding – type plug. A polarize ...
-
Jensen JTA-450 - page 4
3 FCC NOTICE: This equipment has been tested and found to com ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Ru les. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if no ...
-
Jensen JTA-450 - page 5
4 LOCATION OF CON TROLS MAIN UNIT 1. Turntable 16. Play / Pau se Button 2. 45 RPM Adaptor 17. Record Button 3. Cue-lever (use this lever to lift th e tone arm). 18. Skip + Button 4. Tone Arm 19. Skip - Button 5. Speed Selector 20. SD/MMC Card Slot 6. Tone Arm Holder 21. Headphone Jack 7. Speaker 22. USB Port 8. Dust Cover 23. Volume Contr ol 9. Dis ...
-
Jensen JTA-450 - page 6
5 REMOTE CONTROL UNIT 1. PLAY/PAUSE BUTTON 2. RECORD BUTTON 3. STOP/CD/USB/SD BUTTON 4. SKIP- BUTTON 5. SK IP+ BU TTON 6. DISPLAY BUTTON 7. PROG BUTTON 8. MO DE BU T TO N 9. FOLDER UP BUTTON 10. FOLDER DOWN BUTTON 11. DELETE BUTTON IMPORTANT NOTES Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close ...
-
Jensen JTA-450 - page 7
6 BATTERY CARE i. If the unit is not to be used for an ex tended period of time, remove the battery. An old or leaking batt ery can cau se damage to the Remote Co ntrol. ii. Do not dispose of batteries in fire, ba tteries ma y explode or leak. BATTERY REPLACEMENT When the battery becomes weak, the operating distance of the Remote Control is greatly ...
-
Jensen JTA-450 - page 8
7 TIPS FOR BEST RECEPTION AM – The AM antenna is located inside the cabinet of the main unit. If AM reception is weak, change the position of cabinet until t he internal antenna picks up t he strongest AM signal. FM – During FM reception, always keep t he FM Wire Antenna fully extended. If FM reception is weak try repositioning the FM Wire Ante ...
-
Jensen JTA-450 - page 9
8 IMPORTANT : Moving or jarring the Turntable without securing the Tone Arm Clamp (6) could res ult in damage to the Tone Arm (3). ENCODING RECORDS TO MP3 You can convert you favorite re cords into MP3 f iles and s tore then on a USB Flash Drive or SD/MMC Memory Card via th e US B port (22) or S D/MMC slot (2 0) located on the fron t panel. 1. Inse ...
-
Jensen JTA-450 - page 10
9 USB / CARD OPE RATION The following tasks can be accomplished by ei t her using the controls on the REMOTE Control or those which have similar function markings on the JTA-450 m ain unit. This icon indicates that a task can only be performed using the controls on JTA-450. 1. Select the USB / CARD function mode by setting the Function selector ...
-
Jensen JTA-450 - page 11
10 2. The trac k will be re peated and s top unti l the STOP Button ( 3) is pressed. 3. To repeat a Folder, press the MODE button twice. " FOLDER " will light up. 4. The selected Folder will be repeated and stop until t he STOP Button is pressed. 5. To repeat all the tracks, press the MODE Button 3 times and the Reapeat All Indicator &quo ...
-
Jensen JTA-450 - page 12
11 PROGRAMMED PLAY Programmed play can only be achieved in Stop mode. 1. In stop mode, briefly press the MODE button (14) on the unit. Program Channel No. ‘ P1 ’ will brief ly appear. ‘ P ’ will then disappear leaving the Program Indicator,‘ PROG ’ and ‘ 1 ’ flash in the Displa y to prompt for input. 2. Press the or Butt ons (4, 5) ...
-
Jensen JTA-450 - page 13
12 4. To star t recording briefly press the RECORD Button once. Copying USB Files to Card Copying Card Files to USB 5. To stop copying, briefly press the STOP Button once. DELE TING FI LES 1. With the U SB or Card in t he pla yback stop mode, press or Buttons to select the track to delete, for example tr ack 5 is selected. 2. When the desired t rac ...
-
Jensen JTA-450 - page 14
13 4. Sound will then come out from t he system’s built-in speakers and the external Amplifier’s speakers simultaneously. 5. Set the VOLUME CONTROL (23) to “MIN” and adjust the sound level using the VOLUME CONTROL on the external Amplifier as desired. 6. Turn the System and the external Amplifier off when y ou have finished listening. 7. Un ...
-
Jensen JTA-450 - page 15
14 STYLU S REPL ACEMENT PLEASE REFER TO THE DIAGRAM BELOW TO REPLACE THE STYLUS. NO ADDITIONAL STYLUS IS SUPPLIED WITH THE SYSTEM. CARE AND MAINTE NANCE 1. Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used. 2. Avoid leaving your unit in direct s unlight or in hot, humid or dusty places. 3. Keep your unit away ...
-
Jensen JTA-450 - page 16
15 TROUBLESHOOTING GUIDE Should you experience difficulties in the use of this player please refer to the followin g chart or call 1-800-777-5331 for Customer Service. PROBLEM POSSIBLE CAUSE REMEDY • The unit is disc onnected from the AC outlet • Connect to an outlet. The unit will not play • The AC outlet has no po wer • Try the unit on an ...
¿Tienes una pregunta acerca de Jensen JTA-450?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Jensen JTA-450, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Jensen JTA-450 probablemente compartirá una forma de solucionarlo.