Español dropdown-ico

Manual de instrucciones Cisco Systems 78-16019-02

32 de páginas 0.36 mb
Descargar

Pasar a la página of 32

Summary
  • Cisco Systems 78-16019-02 - page 1

    CHAPTER 3-1 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 3 Initial Configuration This chapter describes how to conf igure the Cisco ONS 15530 so it can be accessed by other devices. • About the CPU Switch Module, page 3-1 • Starting Up the Cisco ONS 15530, page 3-2 • Using the Console Po ...

  • Cisco Systems 78-16019-02 - page 2

    3-2 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Starting Up the Cisco ONS 15530 The CPU switch module provides a slot on the front panel that accommodates a CompactFlash card. Y ou can use the CompactFlash card for system image upgrades, FPGA image upgrades, st ...

  • Cisco Systems 78-16019-02 - page 3

    3-3 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About Passwords Modem Support The auxiliary port of the Cisco ONS 15530 provides modem connection support. The follo wing settings on the modem are required: • Enable auto answer mode. • Suppress result codes. ...

  • Cisco Systems 78-16019-02 - page 4

    3-4 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring IP Access on the NME Interface Configuring IP Access on the NME Interface The Fast Ethernet interface, or NME, on the acti ve CPU switch module, named fastethernet 0 , is the management interface that ...

  • Cisco Systems 78-16019-02 - page 5

    3-5 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring IP Access on the NME Interface The Cisco ONS 15530 NME interface should no w be operating correctly . Note If a CPU switch module switchov er occurs, you can use the same IP address to access the redun ...

  • Cisco Systems 78-16019-02 - page 6

    3-6 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring the Host Name Example Switch# show interfaces fastethernet 0 FastEthernet0 is up, line protocol is up Hardware is AmdFE, address is 0000.1644.28ea (bia 0000.1644.28ea) Internet address is 172.20.54.152 ...

  • Cisco Systems 78-16019-02 - page 7

    3-7 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About NTP Note The host name is also synchronized with the standby CPU switch module. The host name prompt on the standby CPU switch module appears with “sby-” as a pref ix. Example The following e xample show ...

  • Cisco Systems 78-16019-02 - page 8

    3-8 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring NTP implementation allows a machine to be conf igured so that it acts as though it is synchronized using NTP , when in fact it has determined the time using other means. Other machines then synchronize ...

  • Cisco Systems 78-16019-02 - page 9

    3-9 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Security Features Configuring Security Features The Cisco ONS 15530 supports the following Cisco IOS softw are security features: • AAA (authentication, authorization, and accounting) • Kerberos ? ...

  • Cisco Systems 78-16019-02 - page 10

    3-10 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Security Features method you hav e implemented) in the form of accounting records. Each accounting record contains accounting attribute-v alue (A V) pairs and is stored on the security serv er . This ...

  • Cisco Systems 78-16019-02 - page 11

    3-11 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Security Features Configuring TACACS+ T o conf igure your router to support T A CACS+, perform the follo wing tasks: Step 1 Use the aaa new-model global conf iguration command to enable AAA. AAA must ...

  • Cisco Systems 78-16019-02 - page 12

    3-12 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About CPU Switch Module Redundancy Refer to the “Conf iguring Passwords and Pri vileges” part in the Cisco IOS Security Conf iguration Guide . About CPU Switch Module Redundancy The Cisco ONS 15530 supports f ...

  • Cisco Systems 78-16019-02 - page 13

    3-13 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About CPU Switch Module Redundancy Figure 3-1 shows the v alid hardware transition states for a system with redundant CPU switch modules. Figur e 3-1 CPU Switc h Module State T ransition Diagr am In response to r ...

  • Cisco Systems 78-16019-02 - page 14

    3-14 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About CPU Switch Module Redundancy Redundant Operation Requirements For fully redundant operation, the follo wing requirements must be met: • T wo CPU switch modules are required. • The CPU switch modules mus ...

  • Cisco Systems 78-16019-02 - page 15

    3-15 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy • The acti ve CPU switch module f ails. The standby CPU switch module takes o ver as the activ e CPU switch module, using the last synchronized running conf iguration f ...

  • Cisco Systems 78-16019-02 - page 16

    3-16 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Forcing a Switchover from ROM Monitor Mode Y ou can manually force the standby CPU switch module to take ov er as the active CPU switch module R OM monitor mode. T o force ...

  • Cisco Systems 78-16019-02 - page 17

    3-17 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Configuring Autoboot If you hav e changed the default conf iguration register v alue from autoboot, you can change it back by performing the following steps, be ginning in ...

  • Cisco Systems 78-16019-02 - page 18

    3-18 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Example The follo wing example sho ws the contents of the conf iguration register: Switch# show version Cisco Internetwork Operating System Software IOS (tm) ONS-15530 Sof ...

  • Cisco Systems 78-16019-02 - page 19

    3-19 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Example The following e xample shows ho w to manually synchronize the running conf iguration: Switch# redundancy manual-sync running-config Enabling and Disabling Automati ...

  • Cisco Systems 78-16019-02 - page 20

    3-20 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Configuring Maintenance Mode Y ou can conf igure the Cisco ONS 15530 to enter the redundancy maintenance mode. Conf iguration synchronizations and standby CPU switch modul ...

  • Cisco Systems 78-16019-02 - page 21

    3-21 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Examples The following e xample shows the CPU switch module redundanc y conf iguration and status: Switch# show redundancy summary Redundant system information ----------- ...

  • Cisco Systems 78-16019-02 - page 22

    3-22 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy The follo wing example sho ws the CPU switch module capabilities: Switch# show redundancy capability CPU capability support Active CPU Sby CPU Sby Compat CPU capability de ...

  • Cisco Systems 78-16019-02 - page 23

    3-23 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy deviation_numbers_str YES N/A N/A manufacturing_use YES 0 0 rma_number_str YES rma_failure_code_str YES oem_str YES Cisco Cisco clei_str YES TBD TBD snmp_oid_substr YES TB ...

  • Cisco Systems 78-16019-02 - page 24

    3-24 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Configuring Privileged EXEC Mode Access on the Standby CPU Switch Module Access to pri vileged EXEC mode from the standby CPU switch module CLI can be enabled from the act ...

  • Cisco Systems 78-16019-02 - page 25

    3-25 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register Example The following e xample shows the pri vileged EXEC mode access status on the standby CPU switch module: Switch# show redundancy summary Redundant system informatio ...

  • Cisco Systems 78-16019-02 - page 26

    3-26 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register • Enable booting from a TFTP server • Recov er a lost password • Boot the system manually using the boot command at the bootstrap program prompt. • Force the syst ...

  • Cisco Systems 78-16019-02 - page 27

    3-27 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register Bit 12 and bit 11 in the conf iguration register determine the data transmission rate of the console terminal. T able 3-6 sho ws the bit settings for the four av ailable ...

  • Cisco Systems 78-16019-02 - page 28

    3-28 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register T able 3-7 describes the v alues for the boot f ield. Default System Boot Behavior The factory default v alue for the conf iguration register on the Cisco ONS 15530 is 0x ...

  • Cisco Systems 78-16019-02 - page 29

    3-29 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Changing the Software Configuration Register Changing the Software Configuration Register T o change the conf iguration register , perform the following steps: Note The factory default v alue for the register is ...

  • Cisco Systems 78-16019-02 - page 30

    3-30 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About Fan Failure Shutdown About Fan Failure Shutdown The Cisco ONS 15530 fan assembly is located at the bottom of the chassis and contains six indi vidual fans and a fan controller board. The controller board mo ...

  • Cisco Systems 78-16019-02 - page 31

    3-31 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Fan Failure Shutdown Displaying the Fan Tray Failure Shutdown Configuration T o display the fan tray failure shutdo wn conf iguration, use the following EXEC command: Example The following e xample sh ...

  • Cisco Systems 78-16019-02 - page 32

    3-32 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Fan Failure Shutdown ...

Fabricante Cisco Systems Categoría Switch

Los documentos del dispositivo Cisco Systems 78-16019-02 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos Cisco Systems
- manuales de instrucciones 78-16019-02
- hojas de producto Cisco Systems
- folletos informativos
- o etiquetas energéticas Cisco Systems 78-16019-02
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones Cisco Systems 78-16019-02.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje Cisco Systems 78-16019-02, instrucciones de servicio, instrucciones cortas o instrucciones de usuario Cisco Systems 78-16019-02. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto Cisco Systems 78-16019-02.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo Cisco Systems 78-16019-02, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar Cisco Systems 78-16019-02. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de Cisco Systems 78-16019-02.

El manual de instrucciones completo de Cisco Systems debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual Cisco Systems 78-16019-02 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice Cisco Systems 78-16019-02, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de Cisco Systems 78-16019-02 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo Cisco Systems 78-16019-02 - que deben facilitarnos los primeros pasos durante el uso de Cisco Systems 78-16019-02
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con Cisco Systems 78-16019-02
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de Cisco Systems 78-16019-02 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de Cisco Systems 78-16019-02?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Cisco Systems 78-16019-02, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Cisco Systems 78-16019-02 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)