-
Planet Technology FGSW-2620VSF - page 1
24-Port 10/100Mbps with 2-Gigabit Web Smart Ethernet Switch FGSW-2402VS/FGSW-2620VSF User’s Manual - 1 - ...
-
Planet Technology FGSW-2620VSF - page 2
- 2 - Trademarks Copyright © PLANET Technology Corp. 2006. Contents subject to revisi on w ithout prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware w ill w o rk properly in all env ironments and applicatio ...
-
Planet Technology FGSW-2620VSF - page 3
- 3 - TABLE OF CONTENTS 1. INTRODUCTION .......................................................................................................................................... 4 1.1 C HECKLIST ................................................................................................................................................ 4 1.2 A B ...
-
Planet Technology FGSW-2620VSF - page 4
- 4 - 1. INTRODUCTION 1.1 Checklist Check the contents of your packag e for follow ing p arts: z FGSW-2402VS or FGSW-2620VSF x1 z User's manual CD x1 z Quick installation guide x1 z Power cord x 1 z Rubber feet x 4 z Rack mount accessory x 1 If any of these pieces are missing or dam aged, please contact your dealer immediat ely , if possible, ...
-
Planet Technology FGSW-2620VSF - page 5
- 5 - 1.3 Features ◆ Complies with the IEEE 802.3, IEEE 802.3u, I EEE 802.3z and IEEE 802.3ab Gigabit Ethernet standard ◆ 24-Port 10/100 Mbps Fa st Ethernet Switch ◆ 2 open slots for 1000Base-T and 100Base- FX, 1000Base-SX/LX fiber-optic interface with various connection media and distances (FGSW-2420VS) ◆ 2-Port Gigabit TP/SFP comb ...
-
Planet Technology FGSW-2620VSF - page 6
- 6 - Temperature Operating: 0~50 degree C, Storage -40~70 degree C Humidity Operating: 10% to 90%, Storage: 5% to 95% (Non-condensing) Smart function System Configuration Web interface Port Status Display per port’s disable/enable status, per port’s link status and speed duplex mode. Also the Flow control status Port Configuration Per port dis ...
-
Planet Technology FGSW-2620VSF - page 7
- 7 - 2. HARDWARE DESCRIPTION This product provides three different running speeds – 10Mbps, 100Mbps and 1000Mbps in the same Web Smart Switch and automatically distinguishes the speed of incoming connection. This section describes the hardware f eatures of Web Smart Switch. For easie r management and control of the Web Smart Switch, familiarize ...
-
Planet Technology FGSW-2620VSF - page 8
- 8 - # Notice: 1. Press the RESET button once. The Web Smart Switch w ill reboot automatically. 2. Press the RESET button for 5 seconds. The Web Smart Sw itch w ill back to the factor y default mode; the entire con- figuration will be erased. 3. The FGSW-2402VSv2 must work with MII-V series module for 100Base-FX fiber connection. 3. The 2 Gigabit ...
-
Planet Technology FGSW-2620VSF - page 9
- 9 - To install the Web Smart Switch in a 19-inch standard rack, follow the instructions described below. Step 1: Place your Web Smart Sw itch on a hard flat surface, w ith the front panel positioned towa rds your front side. Step 2: Attach a rack-mount bracket to each side of the Web Smart Switch with supplied screw s attached to the package. Fig ...
-
Planet Technology FGSW-2620VSF - page 10
- 10 - 3. SWITCH MANAGEMENT This chapter describes how to manage the Web Smart Sw itch. Topics include: - Overview - Management method - Logging on to the Web Smart Switch 3.1 Overview The Web Smart Switch provides a user-friendly, w eb interface. Using this interface, you can perform various sw itch con- figuration and management activities, inclu ...
-
Planet Technology FGSW-2620VSF - page 11
- 11 - 4. WEB MANAGEMENT To modify your PC’s IP domain to the same w ith Web Smart Switch then use the default IP address ( 192.168.0.100 ) to remote configure Web Smart Switch through the Web interface. # Notice: The following section w ill base on the c onsole screens of FGSW-2620VSF, for FGSW -2402VS the display will be the same to FGSW-2620VS ...
-
Planet Technology FGSW-2620VSF - page 12
- 12 - Figure 4-2 Web main menu screen 4-2 Port Status This section provides current status of each port from W eb Smart Switch, the screen in Figure 4-3 appears and table 4-1 describes the port status object of Web Smart Switch. Figure 4-3 Port Status Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 13
- 13 - Object Description Port Indicate port 1 to port 26. Enable Display the port Disable or Enable state of each port on Web Smart Switch. Link Status The state of the link, indicati ng a valid link partner device. "Up" means a device is successful con- nected to the port. “Down” means no device is connected. Spd/Dpx Display the Spe ...
-
Planet Technology FGSW-2620VSF - page 14
- 14 - Figure 4-5 Port Configuration Web Page screen Object Description Port Indicate port 1 to port 26. Enable Per port Disable or Enable on Web Smart Switch. Au t o Per port Disable (Off) or enable (On) Auto negotiation on Web Smart Switch. Spd/Dpx Adjust per port speed duplex mode on Web Sm art Switch; the available options are A uto, 100F, 100H ...
-
Planet Technology FGSW-2620VSF - page 15
- 15 - 4-4 Trunk configuration This function allows to configuring the trunk function. It provides up to 7 trunk groups and each trunk group provides 2 to 8 member ports. Please check the member port from “Normal” to 7 trunk groups and the screen in Figure 4-6 & 4-7 ap- pears. Figure 4-6 Trunk Configuration Web Page screen Figure 4-7 Trunk ...
-
Planet Technology FGSW-2620VSF - page 16
- 16 - Figure 4-8 Trunk Configuration Web Page screen Please press “Back” for return to Trunk configuration screen for further configuration. If the me mber port from each trunk group is out of range or less than 2 ports than the follow ing screen appears. Figure 4-9 Trunk Configuration Web Page screen Please press “Back” for return to Trun ...
-
Planet Technology FGSW-2620VSF - page 17
- 17 - 4-5 VLAN configuration A Virtual LAN (VLAN) is a logical network grouping that limits t he broadcast domain. It allow s y ou to isolate netw ork traffic so only members of the VLAN receive traffic from the same VLAN members. The Web Smart Switch supports 26 port-based VLAN groups. In the default configur ation wi th VLAN disable, the screen ...
-
Planet Technology FGSW-2620VSF - page 18
- 18 - Figure 4-11 Port-based VLAN Setting Web Page screen Press “Relogin” to re-login the Web Smart Switch and the screen in Figure 4-12 appears. Figure 4-12 Port-based VLAN Setting Web Page screen After login web interface of Web Smart Sw itch and choose VLAN confi guration, the screen in Figure 4-13 appears. Figure 4-13 Port-based VLAN Confi ...
-
Planet Technology FGSW-2620VSF - page 19
- 19 - Press “A ddNew” button to add a port-based VLAN group and setup procedure is shown as below: 1. Input a VLAN group ID and available range is 1-4094 . 2. Select specific port as member port and the screen in Figure 4-14 appears. 3. After setup completed, please press “A pply” button to take effect and the screen in Figure 4-15 appears ...
-
Planet Technology FGSW-2620VSF - page 20
- 20 - Figure 4-16 Port-based VLAN Setting Web Page screen 4.5.2 Edit existence port-based VLAN group Click existence VLA N group ID to edit existence port-based VLAN group, the edit procedure is shown as below : ...
-
Planet Technology FGSW-2620VSF - page 21
- 21 - 1. Select specific port as member port and the screen in Figure 4-17 appears. 2. After setup completed, please press “A pply” button to take effect and the screen in Figure 4-18 appears. 3. Please press “Back” for return to VLAN configuration screen to continue VLAN configuration. Figure 4-17 Edit Port-based VLAN Setting Web Page scr ...
-
Planet Technology FGSW-2620VSF - page 22
- 22 - 1. Check existence VLA N group ID and the screen in Figure 4-19 appears. 2. Press “Delete” button to delete existenc e port-based VLAN group. 3. Then the “Delete all checked groups” window appears, please press “OK” to continue the delete VLAN group procedure and the screen in Figure 4-20 appears. 4. Please press “Back” for r ...
-
Planet Technology FGSW-2620VSF - page 23
- 23 - Figure 4-21 Delete Port-based VLAN group Web Page screen Figure 4-22 Port-based VLAN group Web Page screen 4.5.4 Disable port-based VLAN function Select “Disable” and pop window appears, press “OK” to disable the port-based VLAN function then the Web Smart Switch w ill reboot for take affect. The screen in Figure 4-23 & 4-24 & ...
-
Planet Technology FGSW-2620VSF - page 24
- 24 - Figure 4-23 Disable Port-based VLAN function Web Page screen Figure 4-24 Disable Port-based VLAN function Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 25
- 25 - Figure 4-25 Disable Port-based VLAN function Web Page screen Figure 4-26 Disable Port-based VLAN function Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 26
- 26 - Figure 4-27 Disable Port-based VLAN function Web Page screen 4-6 Port Monitoring This function provide to monitoring netwo rk traffic that forw ards a copy of each incoming or outgoing packet from one port of a network Sw itch to another port w her e the packet can be studied. It enables the manager to keep close track of sw itch performance ...
-
Planet Technology FGSW-2620VSF - page 27
- 27 - Figure 4-28 Port Monitoring Web Page screen Object Description Port Monitoring Mode Provide Disable, RX, TX and RX & TX different modes for port Monitoring function. Default mode is Disable . Monitoring Port The monitoring port can be used to see all moni tor port traffic. It can connect monitoring port to LAN analyzer or Netxray. Monito ...
-
Planet Technology FGSW-2620VSF - page 28
- 28 - 4-7 QoS Configuration This function provides QoS Configurat ion of Web Smart Switch, the screen in Figure 4-29 appears and table 4-4 descrip- tions the QoS Configuration of Web Smart Switch. Figure 4-29 QoS Configuration Web Page screen Object Description QoS Mode Provide different modes for QoS Configuration, the available options are shown ...
-
Planet Technology FGSW-2620VSF - page 29
- 29 - Figure 4-30 QoS Configuration Web Page screen Figure 4-31 QoS Configuration Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 30
- 30 - Figure 4-32 QoS Configuration Web Page screen 4-8 Port counters This function could provide you with an i ndividual statistical counter; it is a usef ul page for administrator to monitor each port’s usage condition. Also, it is helpful to troubleshooting netw ork problems. The screen in Figure 4-33 & 4-34 appears. ...
-
Planet Technology FGSW-2620VSF - page 31
- 31 - Figure 4-33 Port Counters Web Page screen Figure 4-34 Port Counters Web Page screen Press “ClearAllCntr” button to refresh current per port counters on Web Smart Switch. ...
-
Planet Technology FGSW-2620VSF - page 32
- 32 - 4-9 Access Control List The Access Control List ( AC L ) is a concept in computer security used to enforce privilege separation . It is a means of determining the appropriate access rights to a given object depending on certain aspects of the process that is making the request, principally the process's user identifier. A ccess Control ...
-
Planet Technology FGSW-2620VSF - page 33
- 33 - Figure 4-36 Access Control List (ACL) Web Page screen Figure 4-37 Access Control List (ACL) Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 34
- 34 - Figure 4-38 Access Control List (ACL) Web Page screen Figure 4-39 Access Control List (ACL) Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 35
- 35 - Figure 4-40 Access Control List (ACL) Web Page screen Figure 4-41 Access Control List (ACL) Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 36
- 36 - Figure 4-42 Access Control List (ACL) Web Page screen Figure 4-43 Access Control List (ACL) Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 37
- 37 - Figure 4-44 Access Control List (ACL) Web Page screen Figure 4-45 Access Control List (ACL) Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 38
- 38 - Figure 4-46 Access Control List (ACL) Web Page screen Figure 4-47 Access Control List (ACL) Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 39
- 39 - Figure 4-48 Access Control List (ACL) Web Page screen Figure 4-49 Access Control List (ACL) Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 40
- 40 - 4-10 Web Smart Function This function could provide you to define device indica te connect to each port on Web Smart Switch, the screen in Figure 4-50 appears. Figure 4-50 Web Smart Funciton W eb Page screen The available options are shown as below : 1. PC 2. PC+Voip 3. Sw itch 4. Router 5. A P 6. Server 7. Printer 8. Guest 9. Other The scre ...
-
Planet Technology FGSW-2620VSF - page 41
- 41 - Figure 4-51 Web Smart Funciton W eb Page screen Figure 4-52 Web Smart Funciton W eb Page screen ...
-
Planet Technology FGSW-2620VSF - page 42
- 42 - Figure 4-53 Web Smart Funciton W eb Page screen This function also provides Apply for all ports option from Select a port function, the setup procedure show n as below: 1. Choose a device and check “Apply for all ports” from options of Select a port function, the screen in Figure 4-54 appears. 2. Check any port then all port w ill be sel ...
-
Planet Technology FGSW-2620VSF - page 43
- 43 - Figure 4-54 Web Smart Funciton W eb Page screen Figure 4-55 Web Smart Funciton W eb Page screen ...
-
Planet Technology FGSW-2620VSF - page 44
- 44 - Figure 4-56 Web Smart Funciton W eb Page screen Figure 4-57 Web Smart Funciton W eb Page screen ...
-
Planet Technology FGSW-2620VSF - page 45
- 45 - 4-11 Misc Operation This section provide Misc Operati on of Web Smart Switch, the screen in Figure 4-58 appears and table 4-6 descriptions the Misc Operation objects of Web Smart Switch. Figure 4-58 Misc Operation Web Page screen Object Description Switch Configuration Provide Advanced Switch Configuration and av ailable options are Broadcas ...
-
Planet Technology FGSW-2620VSF - page 46
- 46 - 4.11.1 Switch Configuration Choose Switch Configuration from Misc Operation of Web Smart Sw itch( please see the Figure 4-58) , the screen in Figure 4-59 appears and table 4-7 descriptions the Switch Configuration from Misc Operation of Web Smart Sw itch. Figure 4-59 Switch Configuration Web Page screen O bject Description Broadcast Storm Fi ...
-
Planet Technology FGSW-2620VSF - page 47
- 47 - Figure 4-60 Switch Configuration Web Page screen Figure 4-61 Switch Configuration Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 48
- 48 - Figure 4-62 Switch Configuration Web Page screen Figure 4-63 Switch Configuration Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 49
- 49 - 4.11.2 TFTP Firmware Upgrade This section provides Firmware upgrade through TF T P method on Web Smart Switch, the screen in Figure 4-64 appears. Figure 4-64 T FTP Firmware Update Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 50
- 50 - 4.11.3 Password Setting This section provides password setting of Web Smart Switch, the screen in Figure 4-65 appears and table 4-8 descriptions the Password Setting. Figure 4-65 Password Setting Web Page screen Object Description Passw ord Pro- tection Provide Password protection function” Disable” or” Enable” on Web Smart Switch ; ...
-
Planet Technology FGSW-2620VSF - page 51
- 51 - 4.11.4 IP Configuration This section provides IP Conf iguration on Web Smart Switch; the screen in Figure 4-66 appears and tables 4-9 descrip- tions the IP Configuration. Figure 4-66 IP Configuration Web Page screen MAC A dd ress Display MAC address on Web Smart Switch. IP A ddress Provide to modify IP Address on Web Smart Sw itch. Default I ...
-
Planet Technology FGSW-2620VSF - page 52
- 52 - 4.11.5 Factory Default This section provides Factory Defaul t function on Web Smart Switch, after c hoose this function and the follow ing screen appears in Figure 4-67. Please press “OK” button to take effect and the switch w ill reset to factory default mode and ask you to w aiting rebooting around 10 sec, press “OK” button to re-l ...
-
Planet Technology FGSW-2620VSF - page 53
- 53 - Figure 4-69 Factory Default Web Page screen Figure 4-70 Factory Default Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 54
- 54 - 4.11.6 Reboot System This section provides Reboot function on Web Smart Switch, after choose this function and the following screen appears in Figure 4-71. Please press “OK” button to take effect and the switch w ill reboot and ask you to waiting rebooting around 10 sec, press “OK” button to re-login the Web Smart Switch. The screen ...
-
Planet Technology FGSW-2620VSF - page 55
- 55 - Figure 4-73 Reboot Web Page screen Figure 4-74 Reboot Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 56
- 56 - 4.11.7 System Information This section display system information on Web Smart Sw itch, after choose this function and the following screen appears in Figure 4-75. Figure 4-75 System Information Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 57
- 57 - 4-12 Logout This section provide web logout func tion on Web Smart Switch, after choose this function and the follow ing screen appears in Figure 4-76. Please press “OK” button to take effect and Logout pop w indow appears, press “OK” button to re-login the Web Smart Switch. The screen in Figure 4-77 & 4-78 & 4-79 appears. Fi ...
-
Planet Technology FGSW-2620VSF - page 58
- 58 - Figure 4-77 Logout Web Page screen Figure 4-78 Logout Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 59
- 59 - Figure 4-79 Logout Web Page screen ...
-
Planet Technology FGSW-2620VSF - page 60
- 60 - 5. SWITCH OPERATION 5.1 Address Table The Switch is implemented w ith an address table. This address table composed of many entries. Each entry is used to store the address information of some node in network, including MAC address, port no, etc. This information comes from the learning proce ss of Ethernet Switch. 5.2 Learning When one pack ...
-
Planet Technology FGSW-2620VSF - page 61
- 61 - 6.TROUBLESHOOTING This chapter contains information to hel p you solve problems. If the Sw itch is not functioning properly, make sure the Ethernet Switch w as set up according to instructions in this manual. The Link LED is not lit Solution: Check the cable connection and remo ve duplex mode of the Switch. Some st ations cannot t alk to oth ...
-
Planet Technology FGSW-2620VSF - page 62
- 62 - APPENDIX A NETWORKING CONNECTION A.1 Switch‘s RJ-45 Pin Assignments 1000Mbps, 1000Base T Contact MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_DA- BI_DB- 3 BI_DB+ BI_DA+ 4 BI_DC+ BI_DD+ 5 BI_DC- BI_DD- 6 BI_DB- BI_DA- 7 BI_DD+ BI_DC+ 8 BI_DD- BI_DC- 10/100Mbps, 10/100Base-TX RJ-45 Connector pin assig nment Contact MDI Media Dependant Interface MDI-X Medi ...
-
Planet Technology FGSW-2620VSF - page 63
- 63 - There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following show s the pin allocation and color of straight cable and crossover cable connection: Figure A-1: Straight-Through and Crossover Cable Please make sure your connected cables are w ith same pin assignment and color as abov e picture before deploy ing the ...
¿Tienes una pregunta acerca de Planet Technology FGSW-2620VSF?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Planet Technology FGSW-2620VSF, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Planet Technology FGSW-2620VSF probablemente compartirá una forma de solucionarlo.