-
Peerless Industries HDS200 - page 1
ISSUED: 07-24-12 SHEET #: 180-9023-1 User Manual and Installation Guide Pro Wireless Multimedia Kit Models: HDS200 HDS200-2 HDS200-3 HDS200-4 REA D Y ® ...
-
Peerless Industries HDS200 - page 2
...
-
Peerless Industries HDS200 - page 3
3 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Contents Safety Precautions ...........................................................................................................................................4 Proper Care and Safety ................................................................................................................. ...
-
Peerless Industries HDS200 - page 4
4 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Please read this manual before using the product. • Unit can be placed vertically (preferred) or horizontally . • T o clean, use a soft, dry cloth only . Do not use water or other cleaning products as they may cause electrical failure or damage the surface of the product. Keep the product out of reac ...
-
Peerless Industries HDS200 - page 5
5 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 HD Flow Pro Wireless Multimedia Kit provides Full HD 1080p signal transfer , including 3D signal*, without the hassle of running cables. Create brilliant HD quality multimedia for signage, presentations, or entertainment in any location,completely un-tethered to your source device! By simply connecting t ...
-
Peerless Industries HDS200 - page 6
6 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 2 x HDMI up to 1080p (60Hz) 1 x Composite 1 x YPbPr Component 1 x HDMI up to 1080p (60Hz) 1 x Composite 1 x YPbPr Component H.264 Baseline Profile with Level 4.2 HDCP compliant Wireless Connection Supporting IEEE 802.11n: OFDM RJ-45 LAN Port Direct Connection (LAN Cable) 1 x LAN Port (Transmitter and Rec ...
-
Peerless Industries HDS200 - page 7
7 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Video Format Supported • Digital Video º HDMI - Up to 1080p @ 24Hz, 25Hz, 30Hz, 50Hz, 60Hz • Analog Video º Composite – 480i @ 60Hz, 70Hz, 85Hz º Component – 1080i @ 50Hz, 60Hz, 720p @ 50Hz, 60Hz º VGA – Up to 1920x1080 @ 50Hz, 60Hz Audio Format Supported • Analog • Digital • Receiver ...
-
Peerless Industries HDS200 - page 8
8 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 T ransmitter Front 1 2 3 4 5 6 7 T ransmitter ...
-
Peerless Industries HDS200 - page 9
9 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 T ransmitter Front 1. Power/Link Indicator Light • Blinking indicator light - System booting or establishing link between the T ransmitter and the Receiver . • Quick blinking indicator light - Software upgrading or wireless/LAN mode switching. • Solid indicator light - Link between the T ransmitter ...
-
Peerless Industries HDS200 - page 10
10 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 2 T ransmitter Back 1 3 4 5 6 7 8 ...
-
Peerless Industries HDS200 - page 11
1 1 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 T ransmitter Back 1. HDMI 1 IN • HDMI1 input port 2. HDMI 2 IN • HDMI2 input port 3. A V -IN • Composite input port 4. IR-OUT • Connects IR Flasher to the T ransmitter for remote control of external devices which are connected to the T ransmitter (i.e. Blu-Ray player , DVD, STB, etc). 5. PC AUD ...
-
Peerless Industries HDS200 - page 12
12 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 2 3 4 5 6 Receiver Front Receiver ...
-
Peerless Industries HDS200 - page 13
13 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Receiver Front 1 . Power/Link • Blinking indicator light - System booting or establishing link between the T ransmitter and the Receiver . • Rapid blinking indicator light - Software upgrading or wireless/LAN mode switching. • Solid indicator light - Link between the T ransmitter and Receiver has ...
-
Peerless Industries HDS200 - page 14
14 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 2 3 4 5 6 7 8 Receiver Back ...
-
Peerless Industries HDS200 - page 15
15 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Receiver Back 1. HDMI-OUT • HDMI output port 2. A V -OUT • Composite output port 3. IR-IN • Connects the IR Extender in order to extend IR reception range. 4. AUDIO-OUT* • Stereo audio output port 5. COMPONENT -OUT* 6. USB • USB port is used for fi rmware upgrades only . 7. LAN • LAN connec ...
-
Peerless Industries HDS200 - page 16
16 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 4 3 6 7 2 5 8 1 . POWER Button - T urns the T ransmitter and Receiver power ON/OFF . • ON: If the T ransmitter and Receiver are powered off and the Power/Link Indicator Light is on, press the power button pointed at either unit to turn on both unit's at the same time (this will take about 30 se ...
-
Peerless Industries HDS200 - page 17
17 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 3. VIDEO OUT (Receiver) - Selects the Audio/Video output port of the Receiver . • HDMI - Selects HDMI as the Audio/Video output. • Component - Selects Component as the Audio/Video output. • A V - Selects A V as the Audio/Video output. Note: Remote must be pointing at the Receiver directly to contr ...
-
Peerless Industries HDS200 - page 18
18 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Installing the Remote Control Battery The battery slip is located on the bottom of the remote control. Step 1 Push the tab, located on the left of the battery slip, to the right and pull out the slip. Battery Slip Battery Slip T ab Step 2 Place the battery into the slip, positive (+) end facing up as sh ...
-
Peerless Industries HDS200 - page 19
19 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Before starting the installation, please ensure that all source components (Blu-ray player , cable box, etc.) and the display equipment (TV , display , projector , etc.) are turned off. Step 1 Connecting Source Components T o The T ransmitter A. HDMI Media Source • Connect HDMI cable from the source c ...
-
Peerless Industries HDS200 - page 20
20 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 A. Connect the provided IR Flasher to the IR-OUT port of the T ransmitter . B. Find the location of the IR widow on your component and adhere the IR Flasher Eye directly over the IR window of your component. Note: One IR Flasher eye is to be used for one component device. Tips Most often the IR window o ...
-
Peerless Industries HDS200 - page 21
21 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Step 5 Powering-up the HD Flow Multimedia Kit Plug in the power adapters for the T ransmitter and the Receiver to available power outlets. Plug in the other end of the power cable to the T ransmitter and then to the Receiver . The units will automatically turn on. Step 6 T urn on your display device (TV ...
-
Peerless Industries HDS200 - page 22
22 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 While turning on the display device, the HD Flow Pro Wireless Multimedia Kit will be going through the start up process. The process takes about 1.5 to 2 minutes to complete. The Power/Link Indicator Light on the T ransmitter and the Receiver should be fl ashing at fi rst. Flashing indicates that that ...
-
Peerless Industries HDS200 - page 23
23 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Notes: 1. Audio and video sources will switch simultaneously whether using the remote or Power/Source Selection Button. 2. Independent audio switching is only allowed for A V and PC audio. 3. Inputs on the T ransmitter and Receiver can be switched by pointing the remote at the T ransmitter or Receiver O ...
-
Peerless Industries HDS200 - page 24
24 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Notes: 1. We recommend that you disconnect and then re-connect the LAN cable to ensure LAN operation. Once video and audio come back up, the process is complete. 2. T o return the units back to WiFi mode press the WiFi Channel 1 button for 5 seconds in front of the Receiver until all the indicator light ...
-
Peerless Industries HDS200 - page 25
25 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Step 5 Under the heading “Streaming I/F” use the pull down menu to change WiFi to LAN. Step 6 Enter the proper IP address, for the unit being set up, based on the network's domain. Step 7 Once all the settings have been entered click the Submit button at the bottom of the form. Keep clicking on ...
-
Peerless Industries HDS200 - page 26
26 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Receiver • HDMI, COMPO, A V - The indicator light will be solid for the selected port as long as the output cable is present and connected to the output device. If no output device is detected by the selected output port, the indicator light will be fl ashing. IR Flasher IR Flashers are provided to a ...
-
Peerless Industries HDS200 - page 27
27 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Note: Peer-to-Peer units can be con fi gured to multicast mode using the USB Multicast Set-Up Method or LAN Multicast Set-Up Method. Additional Receivers (HDS200-R) are required and sold separately . Please visit http://www .hd fl ow .com/T ech-Support for programming instructions. Multicast Modes Mul ...
-
Peerless Industries HDS200 - page 28
28 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Q. What compression standard does the HD Flow use to stream Full HD 1080p content? A. H.264 Baseline Pro fi le Level 4.2 video compression. Q. Does HD Flow Pro Wireless Multimedia Kit deliver 5.1 audio? A. No, the HD Flow Pro Wireless Multimedia Kit only outputs 2-channel audio at the Receiver . Q. Wha ...
-
Peerless Industries HDS200 - page 29
29 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Q. Can the HD Flow Pro Wireless Multimedia Kit be set to default to a speci fi c input/output if the unit is turned off or power is lost? A. Y es, the HD Flow Pro Wireless Multimedia Kit can be set to desired input and output ports via a programming page that can be accessed by using LAN programming. P ...
-
Peerless Industries HDS200 - page 30
30 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Factory Reset CAUTION Factory reset will revert all settings to factory defaults. It is not recommended to perform factory reset on multicast systems (systems that have two or more Receivers). If there are issues with multicast systems, please reference http://www .hd fl ow .com/T ech-Support or call T ...
-
Peerless Industries HDS200 - page 31
31 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 How to Check Firmware V ersion Step 1 Connect the Receiver that needs its fi rmware to be checked to the display device (reference the installation section of this manual). Step 2 Plug in the power AC adapter into a power outlet, and then connect the power cord to the HD Flow Pro Wireless Multimedia Ki ...
-
Peerless Industries HDS200 - page 32
32 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 HDMI D Ͳ Sub AV(CVBS) HDMI COMP AV(CVBS) OO X O X X OO X O X X OO X O X X OO X O X X OO X O X X OO X O X X OO X O ^ X OO X O X X OO X O X X OO X O ^ X OO X O X X OO X O X X OO X O X X OO X O ^ X OO X O X X OO X O X X OO X O ^ X OO X O X X OX XOX X OO X O ^ X OX XOX X OO X O X X OOO XO O OOO XO O OO X O ...
-
Peerless Industries HDS200 - page 33
33 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and ...
-
Peerless Industries HDS200 - page 34
34 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 1 YEAR LIMITED W ARRANTY The HDS200 is distributed by Peerless Industries, Inc. using the highest quality components and technology available. The Product is warranted to be free from defects in material and workmanship, given normal use and care, for 1 Y ear from the original purchase date with proof o ...
-
Peerless Industries HDS200 - page 35
35 of 36 ISSUED: 07-24-12 SHEET #: 180-9023-1 Customer Care Need help with installation or set up? Call Peerless-A V Customer Care 1-1-800-865-21 12 (available 7:00am- 7:00pm CST , Monday - Friday), or email us at info@peerless-av .com. Peerless -A V 2300 White Oak Circle Aurora, IL 60502 USA www .hd fl ow .com Contact Information ...
-
Peerless Industries HDS200 - page 36
Distributed exclusively by Peerless Industries, Inc. 2300 White Oak Circle, Aurora, IL 60502 USA 1-800-865-21 12 www .peerless-av .com www .hd fl ow .com ©2012 Peerless-A V . All rights reserved. Peerless-A V is a trademark of Peerless Industries, Inc. HD Flow is a trademark of I Do It, L TD. Other parties’ marks are the property of their respe ...
¿Tienes una pregunta acerca de Peerless Industries HDS200?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Peerless Industries HDS200, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Peerless Industries HDS200 probablemente compartirá una forma de solucionarlo.