-
Infrasonic BLOW5D - page 1
BI-AMPLIFIED STUDIO MONIT OR INFRASONIC BLOW SERIES Premium Digital Module BLO W5D User ’ s Manual V er .1.00 April 2007 ...
-
Infrasonic BLOW5D - page 2
BLOW5/BLOW5D User’s Manual 2 W ARNING : TO REDUCE TH E RISK OF FIRE OR ELECTRIC SHOC K, DO NOT EXPO SE THIS APPARATUS TO RAIN OR MOISTURE. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash wit h the arrowhead symbol w ...
-
Infrasonic BLOW5D - page 3
BLOW5/BLOW5D User’s Manual 3 INTR ODUCTION Thank you for purchasing BLOW5! Before using this gear , please ca refully read the ‘CAUTION’ , and ‘SAFETY’ sections and the boxed out ‘IMPORT ANT NOTE’ sections. Thes e sections pr ovide important infor mation for the pr oper operation of the un it. And, in order for you to get a better mon ...
-
Infrasonic BLOW5D - page 4
BLOW5/BLOW5D User’s Manual 4 1. Main F ea t ur es 1.1. BLOW5 2-w ay bas s-reflex b i-amp lified 5 inch nea r field stu dio monito r Flat frequency response (±1.5 dB, 58 Hz to 20 kHz) and wide pass-band frequency (50Hz ~ 22kHz) 90 watt (40 watt HF and 50 watt LF) Full discrete power ampli fiers with servo-loop and perfect protections. ...
-
Infrasonic BLOW5D - page 5
BLOW5/BLOW5D User’s Manual 5 2. PANEL DESCRIPTIONS 2.1 F RONT V IEW (1) 0.75” natural silk dome High Frequency Transducer (2) 5.25" Polymer coated paper fibe r cone low frequency Transducer (3) Front Illuminant Logo La mp and Protect ion Indicator The white Lamp mean s that the unit is o n normal operation mode. The red Indicator stands fo ...
-
Infrasonic BLOW5D - page 6
BLOW5/BLOW5D User’s Manual 6 2.2 R EAR V IEW Digital Module Pre-Ampl if ie r Module Power Amplif ier Module 3 4 2 5 6 7 1 (5) High Fr equency T ilt Con trol Y ou can adjust the treble tilt of the unit by selecting from 3 steps (-2dB, Flat, 2dB @3.0 kHz) (6) Room Compensation Cont ro l This switch reduce s low frequency level in steps of -2dB for ...
-
Infrasonic BLOW5D - page 7
BLOW5/BLOW5D User’s Manual 7 2.3. DA-912 ( INCLUDED IN BLOW5D ) (1) AES/EBU Digital Input Connector (2) S/PDIF Coaxial Input Connector XLR for AES/EBU and RCA for S/PDIF coaxial digital inpu t connector . (24-bit/192kHz) <Note> DO NOT try to use Coaxial inpu t for analog audio signals. (3) Source Select Cont r ol Switch Y ou can sele ct the ...
-
Infrasonic BLOW5D - page 8
BLOW5/BLOW5D User’s Manual 8 3. INST ALLA TION 3.1. P OSITIONING S PEAKERS IMPORT ANT NOTES Be careful not to grab or touch the speakers when in use. Damage may occur . Do not put anything on the unit. When the speaker is in operation. The heat sink in the rear side will be hot. T ake care not to touch it. The heat sink which is b ...
-
Infrasonic BLOW5D - page 9
BLOW5/BLOW5D User’s Manual 9 3.2. A DAPTING THE BLOW5 TO THE ROOM ACOUSTICS Generally there are many factors affecting the monitori ng of sound . F or example, room size, distance from the wall, size of studio spac e, the reflection of the room, and the distance between speakers and user . In a multi-channe l monitor ing system like 5.1 su rround ...
-
Infrasonic BLOW5D - page 10
BLOW5/BLOW5D User’s Manual 10 Room Compensati on Contr ol If you’ve pla ced speakers close to the wall or in a corner , you’ll be hearing too much loud low frequency level. In the c ase of some studios, there is bass-trap for reducing the low frequency level. The Room Compensation Control allows yo u to lower the bass range depending on the r ...
-
Infrasonic BLOW5D - page 11
BLOW5/BLOW5D User’s Manual 11 4. CONNECTION 4.1. P OWERING U P IMPORT ANT NOTE All connections should be made, And faders, volumes, sensitivity and other controls are at minimum levels. Before powering up the BLOW5 speakers, a ll other equipment should be turned on first. Please make sure that the unit is plugged into the correct volt ...
-
Infrasonic BLOW5D - page 12
BLOW5/BLOW5D User’s Manual 12 4.3. D IGITAL A UDIO I NPUT ( INCLUDED IN BLOW5D) Connect the XLR for AES/EBU cable to the AES/E BU inpu t or the RCA for S/PDIF coax ial input of the rear panel. Connect ‘THRU’ to the RCA coaxial input of the o ther unit wit h RCA cable. Select the channel of eac h unit’s panel Input Select Swi ...
-
Infrasonic BLOW5D - page 13
BLOW5/BLOW5D User’s Manual 13 5. SPECIFICA TIONS 5.1. BLOW5 System / Enclosure T wo-way , bi-amplified reference monitor (bass-reflex type) Free field frequency Response : 58Hz ~ 20kHz (+/- 1. 5 dB) Free field cutoff response 50Hz ~ 22kHz (+/- 3.0dB) Enclosure Resonant Frequency (vent tun ing): 62Hz Measured Maximum Continuous ...
-
Infrasonic BLOW5D - page 14
BLOW5/BLOW5D User’s Manual 14 High frequency tilt control : -2dB / Flat / +2dB (@ 10kH z) Room control : Flat / -2dB / -4dB (@ 100Hz) Base cut -off frequency control : Flat / 80Hz(THX) / 100Hz (-12dB/ octave) Acoustic S ystem Compensation rage : 30Hz ~ 200Hz, +/-6dB Max Indicator: power/protection (front, white LED) AC Pow ...
-
Infrasonic BLOW5D - page 15
BLOW5/BLOW5D User’s Manual 15 6. END USERS WARRANTY Trademarks INFRASONIC, BLOW5 and BLOW5D are registered trademarks of SIMS C orp. End User Warranty SIMS Corp. warrants this pr oduct, under normal use, to be free of defects in materials and workmanship for a p e r i o d o f O n e ( 1 ) y e a r f r o m d a t e o f p u r c h a s e , s o l o n g a ...
-
Infrasonic BLOW5D - page 16
BLOW5/BLOW5D User’s Manual 16 ...
¿Tienes una pregunta acerca de Infrasonic BLOW5D?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Infrasonic BLOW5D, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Infrasonic BLOW5D probablemente compartirá una forma de solucionarlo.