-
Fujitsu A17-2 - page 1
Monitor Operating Manual English SCENICVIEW A17-2 / A19-1 / A17-2 DVI / A19-1 DVI / RE17-1 DE / RE19-1 DE ...
-
Fujitsu A17-2 - page 2
Are there ... ... any technical problems or other questions which y ou would like to be clarified? Please contact our help desk (see Warranty Booklet). The latest information on our products, tips, updates, etc., can be found on the internet at: www.fujitsu-siemens.com ...
-
Fujitsu A17-2 - page 3
...
-
Fujitsu A17-2 - page 4
This manual was produced by cognitas. Gesellschaft für Technik-Dokumentation mbH – www.c ognitas.de Published by Fujitsu Siemens Computers GmbH Order No.: A 26361-K1063-Z121-1-7619 Edition 1 AG 0106 01/06 ...
-
Fujitsu A17-2 - page 5
SCENICVIEW A17-2 / A19-1 / A17-2 DVI / A19-1 DVI / RE17-1 DE / RE19-1 DE Operating Manual January 2006 edition ...
-
Fujitsu A17-2 - page 6
VESA, DDC and DPMS are registered tradem arks of Video Electronics Standards Association. All rights, including rights of translation, reproduc tion by printing, copying or similar methods, in part or in whole, are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model ...
-
Fujitsu A17-2 - page 7
A26361-K1063-Z121-1-7619, edition 1 Contents Introduction ........................................................................................................................................... 1 Notational conventions ......................................................................................................... ........ 2 Important ...
-
Fujitsu A17-2 - page 8
...
-
Fujitsu A17-2 - page 9
A26361-K1063-Z121-1-7619, edition 1 1 Introduction Your new LCD (Liquid Cry stal Display) monitor o ffers numerous features and functions, for example: ● TFT display (Thin Film Transistor; ac tive matrix) ● minimal space requirements thanks to slim casing ● optimum ergonomic characteristics (totally distor tion-free, excellent picture definit ...
-
Fujitsu A17-2 - page 10
2 A26361-K1063-Z121-1-7619, edition 1 Notational conventions The meanings of the symbols and fonts used in this manual are as follows: ! Pay particular attention to text marked with th is symbol. Failure to observe this w arning endangers your life, destroys the device, or may lead to loss of data. i Supplementary information, remarks, and tips fol ...
-
Fujitsu A17-2 - page 11
A26361-K1063-Z121-1-7619, edition 1 3 ● Lay all cables so that nobody can stand on them or trip over them. When attaching the device, observe the relevant notes in t he "Connecting the monitor" chapter. ● No data transfer cables should be connected or disconnec ted during a thunderstorm. ● Make sure that no objects (e.g. jewellery c ...
-
Fujitsu A17-2 - page 12
4 A26361-K1063-Z121-1-7619, edition 1 Transport ● Transport the monitor with care and only in its original packaging or another corresponding packaging fit to protect it against knocks and jolts. ● Never drop the LCD monitor (danger of glass breakage). Power cable To guarantee safe operation, use the cable supplied. Us e the following guideline ...
-
Fujitsu A17-2 - page 13
A26361-K1063-Z121-1-7619, edition 1 5 FCC Class B Compliance Statement The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products w ill appear in the accompanying documentation. NOTE: This equipment has been tested and found to comply with the limits for a "Class ...
-
Fujitsu A17-2 - page 14
6 A26361-K1063-Z121-1-7619, edition 1 Disposal and recycling This device has been manufactured to the highes t possible degree from materials which can be recycled or disposed of in a manner that is not environmentally damaging. The device may be taken back after use to be recycled, provided that it is returned in a condition that is the result of ...
-
Fujitsu A17-2 - page 15
A26361-K1063-Z121-1-7619, edition 1 7 Installing an ergonomic video workstation Before you set up your equipment, y ou should select a suitable position for working at the monitor. Please observe the following advice when installing a video workstation. 1 1 2 1 = Windows Avoid direct and reflected glare. Avoid glare from electric lighting. 1 = appr ...
-
Fujitsu A17-2 - page 16
8 A26361-K1063-Z121-1-7619, edition 1 Mounting and removing the monitor base Mounting monitor base On delivery the monitor base is removed. ...
-
Fujitsu A17-2 - page 17
A26361-K1063-Z121-1-7619, edition 1 9 Removing monitor base Before you can use a swivel arm or a wall bracket, y ou must remove the entire monitor base: ► Switch off the monitor and pull the power plug out of the power socket. ! The display surface is susceptible to scratching! ► Lay the monitor on its face on a soft surface. ► Remove all cab ...
-
Fujitsu A17-2 - page 18
10 A26361-K1063-Z121-1-7619, edition 1 Connecting the monitor ! Observe the "Safety notes" in the "Import ant notes" chapter in this operating manual. CE conformance and optimum picture quality are guaranteed only if y ou use the data cable supplied. Do not cover the ventilation openings of the monitor. The computer power plug m ...
-
Fujitsu A17-2 - page 19
A26361-K1063-Z121-1-7619, edition 1 11 ► Insert one plug of the audio line in the AUDIO IN (5) socket on the monitor and make sure it is properly engaged. ► Plug the power cable supplied into t he power connector (1) of the monitor. ► Mount the cover over the connections. i A lock (Kensington Lock) can be mounted in the se curity slot (1) to ...
-
Fujitsu A17-2 - page 20
12 A26361-K1063-Z121-1-7619, edition 1 Operation of the monitor The monitor offers the following possibilities that enable it to be optimally adjusted for the respective user and the respective situation. Adjusting rake The rake of the monitor can be adjusted by -5° (for ward) and +20° (back) from its vertical position. ► Grasp the monitor with ...
-
Fujitsu A17-2 - page 21
A26361-K1063-Z121-1-7619, edition 1 13 Notes on power management If your computer is equipped with power managemen t, the monitor can support this function fully . Here the monitor does not distinguish between the individual energy-saving m odes of the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately switching int ...
-
Fujitsu A17-2 - page 22
14 A26361-K1063-Z121-1-7619, edition 1 Changing the monitor settings When putting the monitor into operation for the fi rst time, the screen display should be optimally adapted to the screen controller used and adjusted in accordance with your needs. Basic monitor settings If one of the operating systems Windows 95/98, Windows NT, Window s Me, Wind ...
-
Fujitsu A17-2 - page 23
A26361-K1063-Z121-1-7619, edition 1 15 Monitor settings using the OSD menu With the buttons on the control panel, call up and us e the integrated OSD (On-Screen display) menu. i The OSD menu is available in different languages. The English menu names are used in the following description (default setting). With the OSD function Language in the menu ...
-
Fujitsu A17-2 - page 24
16 A26361-K1063-Z121-1-7619, edition 1 Adjusting the brightness and contrast Calling the setting window Brightness Setting the brightness of the display With this function you change the br ightness of the background lighting. Contrast Setting the contrast of the display With this function you modify the contrast of bright colour tones. i If the co ...
-
Fujitsu A17-2 - page 25
A26361-K1063-Z121-1-7619, edition 1 17 Setting colour temperature and colours Calling the setting window Selecting the colour temperature The "warmth" of the screen colours is set us ing the colour temperature. The colour temperature is measured in K (= Kelvin). You can select from 6500 K , 9300 K , Customer Colour and sRGB . Custom Colou ...
-
Fujitsu A17-2 - page 26
18 A26361-K1063-Z121-1-7619, edition 1 Setting advanced options Calling the setting window Setting language for the OSD menu With this function you select the language for the OSD menu. The following languages are offered: French Polish English (default setting) Spanish Dutch Language German Italian Russian Input Selecting input signal (only for mo ...
-
Fujitsu A17-2 - page 27
A26361-K1063-Z121-1-7619, edition 1 19 Notes on ergonomic colour adjustment If you select colours for the display in y our app lication programmes, take note of the information below. The primary colours blue and red on a dark ba ckground do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data ...
-
Fujitsu A17-2 - page 28
20 A26361-K1063-Z121-1-7619, edition 1 Troubleshooting Should an error occur, first check the following point s. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. Having this problem? Check the following points: No screen d ...
-
Fujitsu A17-2 - page 29
A26361-K1063-Z121-1-7619, edition 1 21 Having this problem? Check the following points: Picture is shaking ► Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. ► Press the AUTO button to conduct the auto- adjustment of the screen. Picture is wrongly adjusted ► Press the AUTO button to condu ...
-
Fujitsu A17-2 - page 30
22 A26361-K1063-Z121-1-7619, edition 1 Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixe ls (picture elements) may be present. The maximum permitted number of pixels faults is ...
-
Fujitsu A17-2 - page 31
A26361-K1063-Z121-1-7619, edition 1 23 Technical data 17" LCD Monitor 19" LCD Monitor Dimensions and weight Visible diagonals: 43 cm 48 cm Dot pitch: 0.264 mm 0.294 mm Maximal resolution: 1280 x 1024 1280 x 1024 Dimensions incl. monitor base: Dimensions box: Width: Height: Depth: Width: Height: Depth: 380 mm 400 mm 214 mm 440 mm 466 mm 12 ...
-
Fujitsu A17-2 - page 32
24 A26361-K1063-Z121-1-7619, edition 1 Environmental conditions Environment class 3K2, IEC 721 Rated range of operation: Humidity: 15 °C .... 35 °C 20 % .... 85 % Limit range of operation: Humidity: 5 °C .... 35 °C 20 % .... 85 % Condensation must be avoided. VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible ...
-
Fujitsu A17-2 - page 33
A26361-K1063-Z121-1-7619, edition 1 25 Pin assignment D-SUB 1 5 6 10 11 15 Pin Meaning Pin Meaning 1 Video input red 9 +5 V (DDC) 2 Video input green 10 Sync. earth 3 Video input blue 11 not assigned 4 not assigned 12 DDC-Data 5 Earth 13 H. sync 6 Red video earth 14 V. sync 7 Green video earth 15 DDC Clock 8 Blue video earth Monitor port DVI-D (onl ...
¿Tienes una pregunta acerca de Fujitsu A17-2?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Fujitsu A17-2, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Fujitsu A17-2 probablemente compartirá una forma de solucionarlo.