-
Bogen V60 - page 1
Power V ector Amplifiers V35, V60, V100, V150, & V250 Models Inst allation and Use Manual © 2004 Bogen Communications, Inc. All rights reserved. Specifications subject to change without notice. 54-2072-0 1 B 040 1 ...
-
Bogen V60 - page 2
Notice Every effort was made to ensure that the information in this guide was complete and accurate at the time of printing. How ev er , information is subject to change. Important Safety Information W ARNING: T o Reduce The Risk of Fire Or Electric Shock, Do Not Expose This Apparatus T o Rain Or Moisture. Alwa ys f ollow these basic saf ety precau ...
-
Bogen V60 - page 3
Contents Page P ANEL DESCRIPTIONS..................................................................................................2-3 Po w er V ector Front Panel ....................................................................................................... ...........2 Po w er V ector Rear Panel ........................................... ...
-
Bogen V60 - page 4
P anel Descriptions Po wer V ector Fr ont P anel 1 . Input V olume Control Each of the 8 inputs is controlled b y an independent v olume contr ol. 2. Signal / Clip Indicator A single two-color LED located abov e each channel’ s volume control indicates the audio activity of that channel’ s input. Green indicates signal pr esent at the input; r ...
-
Bogen V60 - page 5
P anel Descriptions Po wer V ector Rear P anel 1 . A C Receptacle A grounded, unswitched A C convenience r eceptacle with a 500W maximum ca pacity is pr ovided for external equipment. 2 . A C Line Cor d and Cir cuit Br eak er A grounded, 3-wire A C line cord pro vides pow er to the amplifier and is pr otected by a resettable cir cuit break er . 3. ...
-
Bogen V60 - page 6
Installation P ackage Contents • Po w er V ector Amplifier • Module Cov ers (8) • Switch Lock • 1 2 mm Module Cov er Scre ws ( 1 6) • Instruction Manual V entilation and Mounting Models V250 and V 1 50 When rack or table mounting models V250 and V 1 50, allow a minimum clearance of 1 - 1 /4" on the left side of the unit for pr oper v ...
-
Bogen V60 - page 7
Modules Output Modules Functionality The Po w er V ector series of amplifiers accepts Bogen signal-pr ocessing output modules, which offer a cost eff ec- tive and con v enient wa y to add specific signal-pr ocessing capability into a system. When an output module is installed, the mix bus signal is automatically rer outed through the output module, ...
-
Bogen V60 - page 8
Connections Speakers T ransf ormer -Coupled Speaker Connections T ransf ormer -coupled, constant voltage speak er loads are connected to their respectiv e load type (i.e ., 70V speak ers to the 70V terminal, 25V speak ers to the 25V terminals) and the COM terminal. Make sur e the selector switch is in the TRANS OUT position. A separate 8-ohm termin ...
-
Bogen V60 - page 9
Connections COM and GND T erminals A shorting jumper typically connects the COM and GND terminals of the amplifier together . The COM terminal is a common lead from the output transformer . For the transf ormer -coupled speaker output to work, one of the speaker load leads must be connected to this terminal. The GND terminal is a connection to the ...
-
Bogen V60 - page 10
Mute Contr ol Each priority bus (High, Medium, and Low) can be externally activated. This allows priority buses of tw o or more P ower V ector units to be link ed together for system expansion purposes. A particular mute priority can be externally for ced by shor ting that priority’ s bus terminal to the C terminal of the Mute Control (the C term ...
-
Bogen V60 - page 11
Operation Fr ont P anel Controls & Indicators Input V olume Contr ols Each input module ma y be individually controlled by its cor r esponding volume contr ol knob. Signal / Clip Indicator A single LED located above each channel’ s volume contr ol indicates the audio activity of that channel’ s input. Green indicates signal pr esent at the ...
-
Bogen V60 - page 12
Operation Rear P anel Controls Load Selector Switch A large slide switch abov e the amplifier’ s output barrier strip determines transformer -coupled or direct output operation. The setting of this switch contr ols which amplifier output terminals ar e active and what type of f ilter shape will be used for the bass contr ol. See the connections s ...
-
Bogen V60 - page 13
Block Dia gram 11 ...
-
Bogen V60 - page 14
Specifications 12 P o wer Output (RMS): V35: 35W (45W T ypical, @ 1 kHz/0. 1% /4 Ω) V60: 60W (85W T ypical, @ 1 kHz/0. 1% /4 Ω) V 1 00: 1 00W ( 1 40W T ypical, @ 1 kHz/0. 1% /4 Ω) V 1 50: 1 50W (200W T ypical, @ 1 kHz/0. 1% /4 Ω) V250: 250W (340W T ypical, @ 1 kHz/0. 1% /4 Ω) Fr equency Response T ransf ormer : 45-20 kHz; 0/-2 dB @ FRP Di ...
-
Bogen V60 - page 15
T r oubleshooting 13 • Amplifier not plugged in. • A C outlet dead. • Po w er switch off. • Circuit br eaker tripped. • Speak er connections on amplifier incorr ect. • T rans / Direct Out selector not set corr ectly . • Poor / br oken speak er wiring. • Defectiv e speak ers. • Poor electrical connections at input. • Input cable ...
-
Bogen V60 - page 16
W arranty 50 S pring S treet, Ramsey , NJ 07446, U.S.A. T el. 201-934-8500, Fax: 201-934-9832, www .bogen.com Bogen Power V ector Amplifiers are warranted to be free from defects in material or workmanship for three (3) years from the date of sale to the original purchaser . Any part of the product covered by this warranty that, with normal install ...
¿Tienes una pregunta acerca de Bogen V60?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Bogen V60, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Bogen V60 probablemente compartirá una forma de solucionarlo.