-
Kenwood KDC-MP5029VG - page 1
CD-RECEIVER KDC-MP5029V KDC-MP5029V G INSTR UCTION MANU AL © B64-3051-00/00 (MW) B64-3051-00_English_r3.indd ii B64-3051-00_English_r3.indd ii 05.3.10 5:26:25 PM 05.3.10 5:26:25 PM ...
-
Kenwood KDC-MP5029VG - page 2
2 | English Con tents Safety precautions 3 Notes 4 About CDs 5 About,MP3, and WMA 6 General featur es 7 Pow er Selecting the Source Volume Attenuator System Q Audio Control Audio Setup Speaker Setting Theft Deterrent F aceplate Switching Display Dimmer Control TEL Mute T uner fea tures 11 T uning T uning Mode Station Pr eset Memor y Auto Memory Ent ...
-
Kenwood KDC-MP5029VG - page 3
English | 3 Safety precautions About CD play ers/disc changers connected to this unit KENWOOD disc changers/ CD players released in 1998 or later can be connected to this unit. Refer to the catalog or consult your Kenw ood dealer for connectable models of disc changers/ CD players. Note that any KENWOOD disc changers/ CD players released in 1997 or ...
-
Kenwood KDC-MP5029VG - page 4
4 | English Notes • If you experience problems during installation, consult your Kenwood dealer . • If the unit fails to operate properly , press the Reset button. The unit returns to factory settings when the Reset button is pressed. • P ress the reset button if the disc auto changer fails to operate correctly . Normal operation should be re ...
-
Kenwood KDC-MP5029VG - page 5
English | 5 Handling CDs • Don ’t touch the recor ding sur face of the CD. • CD-R and CD-R W are easier to damage than a normal music CD. Use a CD-R or a CD-R W after reading the caution items on the package etc. • Don ’t stick tape etc. on the CD . Also, don ’t use a CD with tape stuck on it. When using a new CD If the CD center hole o ...
-
Kenwood KDC-MP5029VG - page 6
6 | English About, MP3 and WMA The playable MP3/WMA file (hereafter called Audio file) and the media format has the f ollowing limitation. The Audio file, which is out of the specification, may not able to be played normally , or the file and folder names may not be display ed correctly. • Attach the correct extension for the Audio file (MP3: &qu ...
-
Kenwood KDC-MP5029VG - page 7
English | 7 General fea tures Powe r T urning ON the P ower Press the [SRC] button. • When the power is ON, the <Security Code> (page 18) is displayed as "CODE ON" or "C ODE OFF" . T urning OFF the P ower Press the [SRC] button for at least 1 sec ond. Selecting the S ource Press the [SRC] button. Source required Display ...
-
Kenwood KDC-MP5029VG - page 8
8 | English General fea tures Attenua tor T urning the volume down quickly . Press the [ A T T ] button. Each time the button is pressed, the Att enuator turns ON and OFF . When it’ s ON, the " A T T " indicator blinks. Sy stem Q Y ou can recall the best sound setting preset for different types of music. 1 Select the source to set Press ...
-
Kenwood KDC-MP5029VG - page 9
English | 9 Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ST ANDBY" display. 2 Enter Speak er Setting mode Press the [VOL] knob. 3 Select the Speaker type T urn the [ VOL] knob. Each time the knob is turned, the setting switches as shown ...
-
Kenwood KDC-MP5029VG - page 10
10 | English General fea tures Switching Displa y Switching the information displa yed. 1 Enter S witching Display mode Press the C ontrol knob for at least 1 second. "DISP SEL " is displayed. 2 Select the Display item Push the Contr ol knob to [ 4 ] or [ ¢ ]. In T uner source Information Display Fr equenc y "FREQ" Clock " ...
-
Kenwood KDC-MP5029VG - page 11
English | 11 T uner features T uning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the " TUNER" display . 2 Select the band Push the Contr ol knob to [FM] or [AM]. Each time the knob is pushed to [FM], it switches between the FM1, F M2, and FM3 bands. 3 T une up or down band Push the Contr ol knob to [ 4 ] or ...
-
Kenwood KDC-MP5029VG - page 12
12 | English T uner features Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Push the Contr ol knob to [FM] or [AM]. 2 Open Auto Memory Entry Press the [ AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memor y Entr y close ...
-
Kenwood KDC-MP5029VG - page 13
English | 13 CD/Audio file/V CD/Ex ternal disc con trol featur es Playing CD , Audio file & VCD When there is no disc inserted 1 Drop open the fac eplate Press the Release button. 2 Insert a disc. 3 Push the fac eplate on the left side, and return it to its former position. • When the faceplate has been dropped open, it might interfere with t ...
-
Kenwood KDC-MP5029VG - page 14
14 | English CD/Audio file/V CD/Ex ternal disc contr ol featur es Playing External Disc Playing discs set in the optional accessory disc player connected to this unit. Press the [SRC] button. Select the display for the disc player you want. Display examples: Display Disc player "CD CH" CD changer "MD CH" MD changer Pause and pla ...
-
Kenwood KDC-MP5029VG - page 15
English | 15 In CD ,VCD & External disc source Repeat play Display T rack Repeat "TRACK REP" Disc Repeat (In Disc Changer) "DISC REP" OFF "REP OFF" In Audio file Repeat play Display File Repeat "FILE REP" Folder Repeat "FOLD REP" OFF "REP OFF" Scan Play Playing the first part of each s ...
-
Kenwood KDC-MP5029VG - page 16
16 | English CD/Audio file/V CD/Ex ternal disc contr ol featur es F unction of Audio file Folder Select Quickly selecting the folder you want to listen to . 1 Enter F older Select mode Press the [F .SEL] button. "F-SELEC T" is displayed. During Select mode the folder information is displayed as shown below . Folder name displa y Displays ...
-
Kenwood KDC-MP5029VG - page 17
English | 17 Menu system Menu Sy stem Setting during operation beep sound etc. functions. The Menu system basic operation method is explained here. The reference for the Menu items and their setting content is after this operation explanation. 1 Enter Menu mode Press the [MENU] button f or at least 1 second. "MENU" is displayed . 2 Select ...
-
Kenwood KDC-MP5029VG - page 18
18 | English Menu system In Standby mode Secur ity C ode Because authorization by the Security Code is required when it’ s removed from the vehicle , personalizing this unit is by using the Security Code is a help in preventing theft. • When the Security Code function is activated, it can’t be released. Note, your Security Code is the 4 digit ...
-
Kenwood KDC-MP5029VG - page 19
English | 19 4 Exit Clock adjustment mode Press the [MENU] button. In Standby mode DSI (Disabled Sy stem Indicator) A red indicator will blink on the unit after the faceplate is remov ed, warning potential thieves. Display Setting "DSI ON" LED flashes. "DSI OFF" LED OFF . In FM reception CRSC ( Clean Reception Sy stem Circuit) T ...
-
Kenwood KDC-MP5029VG - page 20
20 | English Menu system In Standby mode CD Read Setting When there is a problem on playing a CD with special format, this setting play the CD by f orce. Display Setting "CD READ 1" Play CD and Audio file. "CD READ 2" Play CD by for ce. • Setting "CD READ 2" cannot play Audio file. Some music CDs may not be played ba ...
-
Kenwood KDC-MP5029VG - page 21
English | 21 Basic Operations of r emote Loading and Replacing the battery Use two " AA "-size batteries. Slide the cover while pr essing downwards to remove it as illustrated . Inser t the batteries with the + and – poles aligned properly , following the illustration inside the case . 2 W ARNING • Store unused batteries out of the re ...
-
Kenwood KDC-MP5029VG - page 22
22 | English Basic Operations of r emote Audio C ontrol [A UD] button Select the Audio item for adjustment. [VOL] buttons Adjust the Audio item. • Refer to <Audio C ontrol> (page 8) for the operation method, such as the procedures of A udio control and others. In T uner source [FM]/ [ AM] buttons Select the band. Each time the [FM] button i ...
-
Kenwood KDC-MP5029VG - page 23
English | 23 Ac cessories/ Installation P rocedure Ac cessories 1 ..........1 2 ..........2 3 ..........4 4 ..........4 5 ..........1 6 ..........2 7 ..........1 8 ..........1 9 ..........1 0 ..........1 Installation Proc edure 1. T o prevent a shor t circuit, remov e the key from the ignition and disconnect the - battery. 2. Make the proper input ...
-
Kenwood KDC-MP5029VG - page 24
24 | English Connecting W ires to T erminals ANT. CONT MUTE P.CONT FRONT • L FRONT • R REAR • L REAR • R – + FRONT R L VIDEO OUT PRK SW Battery Ground wire (Black) - ( T o car chassis) FM/AM antenna input Rear left output ( White) Rear right output (Red) F use (10A) Wiring harness (Accessory 1 ) Ignition wire (Red) Battery wire ( Y ellow) ...
-
Kenwood KDC-MP5029VG - page 25
English | 25 • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (for example, the sound may skip). non-Japanese cars Japanese cars 1 Refer to the section <Removing the hard rubber frame> (page 27) and then remove the hard rubber frame. 2 Align the holes in the unit (two locations on each si ...
-
Kenwood KDC-MP5029VG - page 26
26 | English Installation Screwing the F acepla te on the Unit If you want to fasten the faceplate to the main unit so that it does not fall off . 1 Refer to the section <Removing the hard rubber frame> (page 27) and then remove the hard rubber frame. 2 Drop open the faceplate by pressing the Release button. 3 Tighten the stepped screw (A cce ...
-
Kenwood KDC-MP5029VG - page 27
English | 27 Removing the Unit Removing the hard rubber fr ame 1 Engage the catch pins on the removal tool and remove the two locks on the upper level . Upper the frame and pull it forward as shown in the figure. 2 When the upper level is removed , remove the lower two locations. • The frame can be removed from the bottom side in the same manner ...
-
Kenwood KDC-MP5029VG - page 28
28 | English T roubleshooting Guide What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Befor e calling ser vice, first check the following table f or possible problems. General ? The pow er does not turn ON. ✔ The fuse has blo wn. ☞ After checking for shor t circuits in the wires , repla ...
-
Kenwood KDC-MP5029VG - page 29
English | 29 T uner source ? Radio reception is poor . ✔ The car ant enna is not extended. ☞ Pull the antenna out all the way . ✔ The ant enna control wire is not connected. ☞ Connect the wire correctly, r eferring to the section on <Connecting Wir es to T erminals>. Disc source ? " AUX EXT" is display ed without achieving E ...
-
Kenwood KDC-MP5029VG - page 30
30 | English The messages shown belo w display your systems condition. EJEC T: No disc magazine has been loaded in the changer . The disc magazine is not completely loaded. ➪ L oad the disc magazine properly. No CD in the unit. ➪ Insert the CD. NO DISC: No disc has been loaded in the disc magazine. ➪ L oad a disc into the disc magazine. TOC E ...
-
Kenwood KDC-MP5029VG - page 31
English | 31 Specifications FM tuner section Fr equency range (50 kHz space): 87.5 MH z – 108.0 MHz (200 kHz space): 87.9 MH z – 107.9 MHz Usable sensitivity (S/N = 30dB) : 9.3dBf (0.8 µV/75 Ω) Quieting Sensitivity (S/N = 50dB) : 15.2dBf (1.6 µV/75 Ω) Fr equency response (±3 dB) : 30 Hz – 15 kH z Signal to Noise ratio (MONO) : 70 dB Se ...
-
Kenwood KDC-MP5029VG - page 32
B64-3051-00_English_r3.indd 32 B64-3051-00_English_r3.indd 32 05.3.10 5:26:43 PM 05.3.10 5:26:43 PM ...
¿Tienes una pregunta acerca de Kenwood KDC-MP5029VG?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Kenwood KDC-MP5029VG, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Kenwood KDC-MP5029VG probablemente compartirá una forma de solucionarlo.