-
JVC HR-J435EA - page 1
H R-J435EA VIDEO CASSETTE RECORDER INSTRUCTIONS PU30425-1841 PAL OPERATE PROG. TV/VIDEO PICTURE DISPLAY 12 3 45 6 78 9 DAILY(M-F) WEEKLY ADD AUX START TIMER 0 CANCEL C.RESET VOL. TV PROG. REMOTE CONTROL UNIT OK TV C.MEMORY CLOCK Press and hold TV button while pressing OPERATE, TV PROG.+ / –, TV/ VIDEO STOP DATE PUSH JOG AUTO SP/ ...
-
JVC HR-J435EA - page 2
2 SAFETY FIRST Safety Precautions The rating plate and the safety caution are on the rear of the unit. W ARNING: DANGEROUS VOL T AGE INSIDE W ARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION n When you are not using the recorder for a long period of time, it is recommended that you disconnect the power c ...
-
JVC HR-J435EA - page 3
3 Basic Connections CHECK CONTENTS 1 Make sure the package contains all of the accessories listed in “Specifications” ( Z pg. 30). SITUA TE RECORDER 2 Place the recorder on a stable, horizontal surface. CONNECT RECORDER TO TV 3 The connection method you use depends on the type of TV you have. RF CONNECTION ● T o Connect T o A TV With ...
-
JVC HR-J435EA - page 4
4 INST ALLING YOUR NEW RECORDER (cont.) T une The TV T o Y our V ideo Recorder TURN ON THE RECORDER 1 Press OPERA TE . SELECT OUTPUT MODE 2 Set the TEST switch on the back of the recorder to ON. SET TV CHANNEL 3 Set your TV to the video channel (UHF channel 37). T wo white bars appear on screen vertically . ● T une the TV until the bars are as cl ...
-
JVC HR-J435EA - page 5
5 q 6 5 / 8 2 3 On-Screen Displays The superimposed indication on the TV screen tells you what the recorder is doing. 1– Operation mode indicators 2– Channel position number/Aux. indicator (AUX) 3– Cassette loaded mark 4– T ape speed SP/LP/EP (EP is for NTSC playback only) 5– Clock display 6– Current day/month/year 7 ...
-
JVC HR-J435EA - page 6
6 T uner Set INITIAL SETTINGS (cont.) Y our recorder needs to memorise all necessary stations in channel positions in order to record TV programmes. Once stored, you can call them up with the TV PROG. buttons without going through any vacant channels. SEARCH/STORE DELETE FINE TUNING GUIDE PROG. SET [TV PROG 5 ∞ ] = [CANCEL] :EXIT BAND SELECT VHF ...
-
JVC HR-J435EA - page 7
7 SELECT POSITION 6 Press TV PROG. 5 / ∞ until an open position in which you want to store a channel appears, then press OK . STORE CHANNEL 7 If fine tuning is not necessary , simply press STORE . For fine tuning adjustment, press TV PROG. 5 / ∞ until the picture becomes clearer, then press STORE . ● T o continue Auto Channel Search, press TV ...
-
JVC HR-J435EA - page 8
8 INITIAL SETTINGS (cont.) Fine-T uning Channels Already Stored TURN ON THE RECORDER 1 Press OPERA TE . ACCESS CHANNEL SET MODE SELECT SCREEN 2 Press and hold CH SET for more than 2 seconds. The Channel Set Mode Select screen appears. SELECT MODE 3 Press TV PROG. 5 / ∞ to place the pointer next to "FINE TUNING", then press OK . SELECT C ...
-
JVC HR-J435EA - page 9
9 q 6 5 / 8 2 3 Clock Set 12 3 45 6 78 9 0 T urn on the TV and select the VIDEO channel (or AV mode). NOTE: If, in step 7 , the year digits are automatically cleared, it is possible that you have input 29th February for a non-leap year . Input the correct data. OPERATE NUMBER 5∞ CLOCK OPERATE TV PROG. OK Use the buttons on the ...
-
JVC HR-J435EA - page 10
10 PLA YBACK Basic Playback The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme. LOAD A CASSETTE 1 Make sure the window side is up, the rear label side is facing you and the arrow on the front ...
-
JVC HR-J435EA - page 11
11 Playback Features High-Speed Search ACTIV A TE HIGH-SPEED SEARCH 1 Press FF for forward high-speed sear ch, or REW for reverse high-speed sear ch. ● For short searches, press and hold FF or REW for over 2 seconds. When released, normal playback resumes. T o resume normal playback, press PLA Y . NOTE: When playing back LP recordings in the sear ...
-
JVC HR-J435EA - page 12
12 q 6 5 / 8 2 3 PLA YBACK (cont.) Instant ReView Simply by pressing a single button, the recorder power comes on, rewinds, and begins playback of the last timer -recorded programme. If you have several programmes recorded, you can easily access any of them. NOTES: ● Before starting, make sure that the recorder is off and that ...
-
JVC HR-J435EA - page 13
13 T ape Position Indicator The tape position indicator appears on screen when, from the Stop mode, you press FF , REW or perform an Index Sear ch. The position of “ 5 ” in relation to “0” (beginning) or “+” (end) shows you where you are on the tape. ”O.S.D.” ( Z pg. 5) must be set to “ON”, or the indicator will not appear . NOT ...
-
JVC HR-J435EA - page 14
14 TV signals being received by the recorder ’s built-in tuner can be recorded onto a video tape. Y ou can “capture” a TV programme using your video recorder . RECORDING Basic Recording T urn on the TV and select the VIDEO channel (or AV mode). 12 3 45 6 78 9 0 q 6 5 / 8 2 3 LOAD A CASSETTE 1 Insert a cassette with the rec ...
-
JVC HR-J435EA - page 15
15 Record One Pr ogramme While W atching Another SELECT CHANNEL TO W A TCH 1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view . ● The programme selected with the TV’ s channel controls appears on the TV screen while the one selected with the TV PROG . button(s) is record ...
-
JVC HR-J435EA - page 16
16 The G-Code timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the G-Code number for the TV program you wish to record (found in most TV listings) and the recorder’s timer is automatically programmed. Depending on the TV or cable stations that you r ...
-
JVC HR-J435EA - page 17
17 ST AR T SETTING 3 Press OK . ● The GUIDE PROG. number starts blinking. INPUT GUIDE PROG. NUMBER 4 Press TV PROG. 5∞ to input the Guide Prog. number , then press OK . ● The TV PROG. number starts blinking. INPUT RECEIVING CHAN- NEL (TV PROG.) NUMBER 5 Press TV PROG. 5∞ to input the TV Prog. number , then press OK . ● Repeat steps 3 – ...
-
JVC HR-J435EA - page 18
18 G-Code Timer Pr ogramming TIMER RECORDING (cont.) Before performing G-Code timer recording, be sure to read "G-Code Setup" ( Z pg. 16). Before performing the following steps: ● Insert a cassette with the safety tab in place. The recorder will come on automatically . ● T urn on the TV and select the VIDEO channel (or A V mode). ...
-
JVC HR-J435EA - page 19
19 NOTES: ● Y ou can programme this recorder to timer -record as many as 8 programmes. T o record the extra programme, you must first cancel any unnecessary programmes ( Z pg. 21, "Check And Cancel Programmes"). ● For safety , your recorder disables all other functions while in the T imer mode. If you want to use the recorder but its ...
-
JVC HR-J435EA - page 20
20 Regular Timer Pr ogramming Before performing the following steps: ● Insert a cassette with the safety tab in place. The recorder will come on automatically . ● T urn on the TV and select the VIDEO channel (or A V mode). Remember , the clock must be set before you can programme the timer ( Z pg. 9). 12 3 45 6 78 9 0 q 6 5 / 8 ...
-
JVC HR-J435EA - page 21
21 ENTER CHANNEL POSITION 6 Press TV PROG. 5 / ∞ to select the channel you wish to record. SET T APE SPEED 7 Press SP/LP to set the tape speed. ● For each additional programme, press PROG. and repeat steps 3 – 7 . RETURN TO NORMAL SCREEN 8 Press PROG. as many times as necessary to return to normal screen. ENGAGE RECORDER’S TIMER MODE 9 Pres ...
-
JVC HR-J435EA - page 22
22 EDITING Edit T o Or Fr om Another V ideo Recorder Y ou can use your video recorder as the source player or the recording deck. MAKE CONNECTIONS 1 Connect the player’s AUDIO/VIDEO OUT connector to the recorder’ s AUDIO/VIDEO IN connector . SET RECORDING DECK’S INPUT MODE 2 Set to AUX. W ith this video recorder , press NUMBER Key &qu ...
-
JVC HR-J435EA - page 23
23 q 6 5 / 8 2 3 Y ou can use a camcorder as the source player and your video recorder as the recorder . Edit Fr om A Camcorder MAKE CONNECTIONS 1 Connect the camcorder’s AUDIO/VIDEO OUT connectors to the recorder ’ s front panel AUDIO/VIDEO input connectors. ● When a Master Edit Control-equipped JVC camcorder is used, the ...
-
JVC HR-J435EA - page 24
24 TROUBLESHOOTING Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily corrected, and this can save you the trouble of sending your video recorder off for repair . POSSIBLE CAUSE ● The mains power cord is discon- nected. ● “TIMER“ is displayed on the display ...
-
JVC HR-J435EA - page 25
25 TIMER RECORDING CORRECTIVE ACTION Re-perform the clock and/or timer settings. Press TIMER and confirm that “TIMER“ is displayed on the display panel. T imer programming can’t be performed while a timer recording is in progress. W ait until it finishes. Load a cassette with the Record Safety tab intact, or cover the hole using adhesive tape ...
-
JVC HR-J435EA - page 26
26 PLA YBACK Q. What happens if the end of the tape is reached during playback or search? A. The tape is automatically rewound to the beginning. Q. Can the video recorder indefinitely remain in the still mode? A. No. It stops automatically after 5 minutes to protect the heads. Q. During search, slow , still and frame-by-frame playback, I can’t he ...
-
JVC HR-J435EA - page 27
27 FRONT VIEW 1 OPERA TE Button ( Z pg. 4) 2 Cassette Loading Slot 3 CH SET Button ( Z pg. 6) 4 Rewind [REW] Button ( Z pg. 10) 5 PLA Y Button ( Z pg. 10) OK Button ( Z pg. 6) 6 Fast Forward [FF] Button ( Z pg. 10) 7 VIDEO and AUDIO Input Connectors ( Z pg. 23) 8 AUTO SP/LP TIMER Button ( Z pg. 21) 9 AUTO SP/LP TIMER Indicator ( Z pg. 21) 0 INTELLI ...
-
JVC HR-J435EA - page 28
28 DISPLA Y P ANEL REC TIMER PLAY M SP LP 1 7 5 2 3 6 4 5 ”Cassette Loaded” Mark 6 Counter Memory Indicator ( Z pg. 13) 7 ”T imer” Indicator ( Z pg. 18) 1 PLA Y Indicator ( Z pg. 10) 2 REC Indicator ( Z pg. 14) 3 T ape Speed Indicators ( Z pg. 14) 4 Clock/Counter/Channel Display ( Z pg. 6) INDEX (cont.) ...
-
JVC HR-J435EA - page 29
29 OPERATE PROG. TV/VIDEO PICTURE DISPLAY 12 3 45 6 78 9 DAILY(M-F) WEEKLY ADD AUX START TIMER 0 CANCEL C.RESET VOL. TV PROG. REMOTE CONTROL UNIT OK TV C.MEMORY CLOCK Press and hold TV button while pressing OPERATE, TV PROG.+ / –, TV/ VIDEO STOP DATE PUSH JOG 2 0 # ( y u 3 * 4 1 ! % $ i o & ^ 5 6 8 @ 9 ) e t 7 q w r REMOTE C ...
-
JVC HR-J435EA - page 30
30 GENERAL Power requirement : AC 220 – 240 V ` , 50/60 Hz Power consumption : 17 W T emperature Operating : 5°C to 40°C Storage : –20°C to 60°C Operating position : Horizontal only Dimensions (WxHxD) : 400 x 94 x 276 mm W eight : 3.6 kg Format : VHS standard Maximum recording time (SP) : 240 min. with E-240 video cassette : 160 min. with T ...
-
JVC HR-J435EA - page 31
HR-J435EA COPYRIGHT © 1996 VICTOR COMPANY OF JAPAN, LTD. EA Printed in Malaysia 0796YOV * UN * PJ VICTOR COMP ANY OF JAPAN, LIMITED ...
¿Tienes una pregunta acerca de JVC HR-J435EA?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con JVC HR-J435EA, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con JVC HR-J435EA probablemente compartirá una forma de solucionarlo.