-
Simplicity SMLBC55151BV - page 1
ASSEMBLY INSTRUCTIONS OPERATOR’S MANUAL PARTS LIST COPYRIGHT © 2004 ALL RIGHTS RESERVED Manual No. 3071773 (I.R. 2/4/04) CLASSIC Walk-Behind Leaf Blower Series 1 Actual product may differ slightl y from product pictured above MFG NO. MODEL 1694581 SMLBC55151BV ...
-
Simplicity SMLBC55151BV - page 2
1 preliminaries Congratulations! You have just purchased one of the fi nest pieces of outdoor power equipment on the market today. If properly cared for, your new blower will pr ovide years of dependable service. Pl ease read and follow this instruction manual carefully in order to get t he most out of your new equipment. As you carefully unpack yo ...
-
Simplicity SMLBC55151BV - page 3
2 safety rules regarding outdoor power equipment IMPORTANT! READ CAREFULLY THE FO LLOWING SAFETY RULES BEFORE ASSEMBLING OR OPERATING UNIT. TRAINING • Read, understand, and follow all instructions in the manual and on the unit before starting. If the operator(s) or mechanic(s) can not read English it is the owner’s responsibility to explain thi ...
-
Simplicity SMLBC55151BV - page 4
2 safety rules regarding outdoor power equipment (cont.) • Watch for holes, ruts, or bumps. Uneven terrain could overturn the unit. Tall grass can hide obstacles. • Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction. Do Not • Do not start or stop on a slope. If tires lose traction, proceed slowl ...
-
Simplicity SMLBC55151BV - page 5
3 unit assembly Note: Please refer to Parts List for corr ect part identification and placement. FRONT WHEEL ASSEMBLY • Attach left and right caster brackets to caster wheel using 3/8-18 x 2-1/4 bolt and lock nut. Insert bolt through hole in bracket. Place caster wheel onto bolt. Place other caster bracket onto bolt. Secure with lock nut. Do not ...
-
Simplicity SMLBC55151BV - page 6
4 unit operation STARTING THE ENGINE IMPORTANT NOTE: The procedures outlined within this section are general guidelines, and are in no way meant to replace or supercede engine manufacturer’ s oper ating instructions. In order to obtain optimum performance from your engine, refer to your engine manual. WARNING! IMPELLER IS MOUNTED DIRECTLY TO ENGI ...
-
Simplicity SMLBC55151BV - page 7
4 unit operation (cont.) STARTING THE ENGINE (cont.) • Bracing unit with one hand on the upper handle and a foot on the right rear tire, firmly grasp recoil handle and pull briskly. You may have to pull several times before engine starts. (If engine fails to start within a reasonable amount of time, discontinue and check engine manual for further ...
-
Simplicity SMLBC55151BV - page 8
4 unit operation (cont.) GENERAL RULES TO OBSERVE BEFORE AND DURING OPERATION: • Inspect your unit before each and every use. Check for wo rn, bent or broken components, loose fasteners, low or flat tires, etc., and repair or replace prior to operation. DO NOT OPERATE A MACHINE THAT IS WORN OR DAMAGED – SERIOUS INJURY OR DEATH CAN RESULT. • C ...
-
Simplicity SMLBC55151BV - page 9
5 maintenance BEFORE MAKING ANY ADJUSTMENTS, STOP ENGINE AND DISCONNECT SPARK PLUG WIRE TO PREVENT INADVERTENT STARTING OF UNIT. GENERAL: • Follow implicitly the engine manufacturer’s reco mmendations for maintenance. • Always keep your machine clean – especially the engine. Check all adjustments periodically. Also, periodically check that ...
-
Simplicity SMLBC55151BV - page 10
5 maintenance (cont.) BEFORE MAKING ANY ADJUSTMENTS, STOP ENGINE AND DISCONNECT SPARK PLUG WIRE TO PREVENT INADVERTENT STARTING OF UNIT. TROUBLESHOOTING: • UNIT WILL NOT START: • Check fuel and oil levels. • Check to make sure choke is se t when engine is cold, off when hot. • Check throttle for proper operation. • Check intake baffle for ...
-
Simplicity SMLBC55151BV - page 11
6 illustrated parts list ...
-
Simplicity SMLBC55151BV - page 12
6 illustrated parts list (cont’d) Item Part No. Qty Description 1 3010003 1 WELDMENT, Base & Housing 52 Classic 2 3021506 1 WELDMENT, Impeller Steel 4 Blade 15.00 O.D. 3 90167 1 SCREW, 3/8-24 x 2" Hex Head Cap, GR5 4 3020234 1 WELDMENT, Intake Baffle 5 91511 8 NUT, 5/16-18 Hex, GR5 or B 6 91315 10 WASHER, 5/16" Split Lock 7 3024507 ...
-
Simplicity SMLBC55151BV - page 13
6 illustrated parts list 39 91962 1 WASHER, .468 x 1.625 x .25 Flat 40 3031220 1 BUSHING, Flanged .375 x .500 x .25 (.625 x .063 Flange) 41 91189 4 BOLT, 5/16-18 x 2", Curved Head Square Neck, GR2 42 90391 4 WASHER, 5/16" Internal Tooth Lock 43 3071776 4 KNOB, Folding Handle 44 46465 1 GUIDE, Rope 45 90372 1 NUT, 1/4-20 Hex Center Lock, G ...
-
Simplicity SMLBC55151BV - page 14
NOTES __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ ____________________________________________ ...
-
Simplicity SMLBC55151BV - page 15
NOTES __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ __________________________________________________________________________ ____________________________________________ ...
-
Simplicity SMLBC55151BV - page 16
COPYRIGHT © 2004 SIMPLICITY MANUFACTURING, INC. www.simplicity.com ALL RIGHTS RESERVED Manual No. 3071773 (I.R. 2/4/04) Port Washington, WI 53074 USA CLASSIC Walk-Behind Leaf Blower Series 1 ...
¿Tienes una pregunta acerca de Simplicity SMLBC55151BV?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Simplicity SMLBC55151BV, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Simplicity SMLBC55151BV probablemente compartirá una forma de solucionarlo.