-
AEG LN 79680A3 - page 1
LAVAMAT LN 79680A3 LAVAMAT LN 79689A3 User manual Washing Machine ...
-
AEG LN 79680A3 - page 2
Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all process es perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass i ...
-
AEG LN 79680A3 - page 3
Water drainage 34 ELECTRICAL CONNECTION 35 ENVIRONMEN T CONCERNS 36 Packaging materials 36 Ecological hints 36 Subject to change without notice OPERATING INSTRUCTIONS SAFETY INFORMATIO N Read carefully & keep for future reference. • The safety of Your appliance complies with the industry standards and with legal re - quirements on the safety ...
-
AEG LN 79680A3 - page 4
Installati on • This appliance is heavy. Care should be taken when moving it. • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the Service Centre. • All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. Se ...
-
AEG LN 79680A3 - page 5
• Make sure that children or pets do not climb inside the drum. To prevent children or pets becoming trapped inside the drum the ma - chine incorporates a special feature. To acti - vate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device an ...
-
AEG LN 79680A3 - page 6
Detergent dispenser drawer Compartment for detergent used for prewash . The prewash detergent is added at the beginning of the wash programme. Compartment for powder or liquid detergent used for main wash . Compartment for liquid additives (fabric softener, starch). Compartment for stain remover used for main wash with STAIN-option . CONTROL PANEL ...
-
AEG LN 79680A3 - page 7
3 SPIN reduction button 4 OPTIONS button 5 OK button 6 TIME SA VING butto n 7 START/PAUSE button 8 DELAY S TART butto n 9 Display Symbols: Handwash; Child Lock. DISPLAY 9.1 9.2 9.4 9.5 9.6 9.7 9.8 9.3 9.9 9.1 - Temperature indicator and COLD symbol 9.2 - Spin Speed indicator, RINSE HOLD , NIGHT CYCLE - symbols 9.3 - Programme progress display: PREW ...
-
AEG LN 79680A3 - page 8
– After selecting a programme, the duration is displayed in hours and minutes (for ex - ample . The duration is calculated automatically on the basis of the maximum recommended load for each type of fabric. – After the programme has started, the time remaining is updated every minute. • Delay start – The selected delay (20 hours max) set by ...
-
AEG LN 79680A3 - page 9
This function remains able also when the washing machin e is not working. To enable (or disable) this option press simultaneously for about 6 seconds buttons 4 and 5 until the Child Lock symbol appears on (or disappears from) the display . There are two different ways to set this option: • Before pressing button 7 : it will be impossible to start ...
-
AEG LN 79680A3 - page 10
2. If required, pour fabric softener into the compa rtme nt mark ed (the amount used must not exceed the MAX mark in the drawer). Close the drawer gently. Turn the programme dial (1) to set the required programme You can choose the right programme for any type of laundry following the descriptions on the washing programme tables (see «Washing Prog ...
-
AEG LN 79680A3 - page 11
Select the spin speed, NIGHT CYCLE or RINSE HOLD option (button 3) When the required programme has been selected, your appliance automatically proposes the maximum spin speed provided for that programme. Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washi ...
-
AEG LN 79680A3 - page 12
This option is recommended for heavily soiled laundry. STAIN option Select this option to treat heavily soiled or stained laundry with stain remover (extended main wash with time optimized stain action phase). The relevant symbol will appear on the display. This option is not available with a temperature lower than 40°C. If you wish to perform a p ...
-
AEG LN 79680A3 - page 13
Select the DELAY START (button 8) Before you start the programme , if you wish to delay the start, press the button repeat - edly, to select the desired delay. The corresponding symbol will appear on the display. The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 20 hours by means of this ...
-
AEG LN 79680A3 - page 14
Opening the door after the programme has started When the machine is working and throughout the delay time the door is locked. If, for any reason, you wish to open the door, set firstly the machine to pause by pressing the button 7 . • If the DOOR symbol blinks and after a few minutes disappears, the door can be opened; • If the DOOR symbol doe ...
-
AEG LN 79680A3 - page 15
WASHING PROGRAMMES Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry Options Detergent Compartmen t COTTON 95°- Cold Main wash - Rinses - Long spin at maximum spin speed Max. load 8 kg - Reduced load 4 kg For white and coloured cotton (normally soil ed items). SPIN reduction / NIGHT CYCLE / RINSE HOLD ...
-
AEG LN 79680A3 - page 16
Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry Options Detergent Compartmen t SYNTHETICS 60°- Cold Main wash - Rinses - Short spin at 1200 rpm Max. load 4 kg - Reduced load 2 kg Synthetic or mixed fabrics: underwear, coloured garments, non-shrink shirts, blouses. SPIN reduction / NIGHT CYCLE / RINS ...
-
AEG LN 79680A3 - page 17
Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry Options Detergent Compartmen t DRAIN Draining of water Max. load 8 kg For emptyi ng out the wa ter of the last rinse in pro - grammes with the Rinse Hold or Night Cycle option selected. SPIN Drain and long spin at maximum spin spe ed Max. load 8 kg Sepa ...
-
AEG LN 79680A3 - page 18
Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry Options Detergent Compartmen t SPORT JACKETS 40° - Cold Main wash - Rinses - Short spin at 800 rpm Max. load 2 kg Special program for sport clothes. By selecti ng this program, do not add any additives. SPIN reduction / RINSE HOLD EXTRA RINSE SPORT INT ...
-
AEG LN 79680A3 - page 19
Programme Maximum and Minimum Temperature Cycle Description Maximum Fabrics Load Type of Laundry Options Detergent Compartmen t COTTON EC ONOMY 60° Main wash - Rinses - Long spin at maximum spin speed Max. load 8 kg White and fast coloured cotton . This programme can be selected for slightly or nor - mally soiled cotton items. The temperatur e wil ...
-
AEG LN 79680A3 - page 20
Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cl oth. Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will already have b een damaged and the fabric tends ...
-
AEG LN 79680A3 - page 21
Degrees of water hardness Water hardness is classified in so-called “degrees” of har dness. Information on hardness of the water in your area can be obtained from the relevant water supply company, or from your local authority. If the water hardness degree is medium or high w e suggest you to add a water softener following always the manufactur ...
-
AEG LN 79680A3 - page 22
2. Remove the conditioner insert from the middle compartment. 3. Clean all parts with water. 4. Put the conditioner insert in as far as it will go, so that it is firmly in place. 5. Clean all parts of the washing machine, especially the nozzles in the top of the washing-in chamber, with a brush. 6. Insert the detergent dispenser drawer in the guide ...
-
AEG LN 79680A3 - page 23
• the appliance makes an unusual noise during draining due to objects such as safety pins, coins etc. blocking the pump; • a problem with water draining is detected (see chapter “What to do if... ” for more de - tails ). WARNING! Before opening the pump door, switch the appliance off remove the mains plug from the socket. Proceed as follows ...
-
AEG LN 79680A3 - page 24
8. Remove foreign bodies and fluff from the filter seat and from the pump im - peller. 9. Check carefully whether the pump im - peller rotates (it rotates jerkily). If it doesn’t rotate, please contact your Serv - ice Cen tre. 10. Put the cap back on the emergency emptying hose and place the latter back in its seat. 11. Replace the filter into th ...
-
AEG LN 79680A3 - page 25
5. Unscrew the hose from the machine. Keep a towel nearby because some wa - ter may flow. 6. Clean the filter in the valve with a stiff brush or with the piece of cloth. 7. Screw the hose back to the machine and make sure the connection is t ight. 8. Turn on the water tap. Frost precautions If the machine is installed in a place where the temperatu ...
-
AEG LN 79680A3 - page 26
5. place a bowl on the floor and place the end of the emergency emptying hose into the bowl. Remove its cap. The water should drain by gravity into the bow l. When the bowl is full, put the cap back on the hose. Empty the bowl. Repeat the procedure until water stops flowing out; 6. clean the pump if necessary as previously described; 7. replace the ...
-
AEG LN 79680A3 - page 27
Problem Possible cause/Solutio n The machine does not fill: The water tap is closed. • Open the wate r tap. The inlet hose is squashed or kinked. • Check the inlet hose connection. The filter in the in let hose or the inle t valve fil - ter are blocked . • Clean the water inlet filte rs (see "Cleaning the water inlet filters" for m ...
-
AEG LN 79680A3 - page 28
Problem Possible cause/Solutio n Unsatisfactory washing results: Too little detergent or unsuit able detergent has been used. • Increase the de tergent quantity or use an - other one. Stubborn stains have not been treated prior to washing. • Use commercial products to treat the stub - born stains. The correct temperature was not selected. • C ...
-
AEG LN 79680A3 - page 29
Problem Possible cause/Solutio n The machin e makes an unusual noi se: The machine is fitted with a type of motor which makes an unusual noise compared wit h other tradition al motors. This new m otor en - sures a softer start and more even distribution of the laundry in the drum when spinning, as well as increased stability of the machine. No wate ...
-
AEG LN 79680A3 - page 30
CONSUMPTION VALUES Programme 1) Energy consumption (KWh) 2) Water consumption (li - tre) 2) White Cottons 95 °C 2.5 65 Cottons 60 °C 1.7 63 Cottons 40 °C 1.0 62 Synthetics 40 °C 0.55 51 Delicates 40 °C 0.50 68 Wool/ Handwash 30 °C 0.30 64 1) Refer to the dis play for the program me time. 2) The consumption in formation shown in this chart is ...
-
AEG LN 79680A3 - page 31
1. After removing all the packaging, care - fully lay machine on it’s back to remove the polystyrene base from the bottom. 2. Remove the power supply cable and the draining hose from the hose holders on the rear of the appliance. 3. Unscrew the three bolts using the key suppli ed wit h the m achin e. Installation 31 ...
-
AEG LN 79680A3 - page 32
4. Slide out the relevant plastic spacers. 5. Open the porthole, take out the inlet hose from the drum and remove the polystyrene block fitted on the door seal. 6. Fill the smaller upper hole and the two large ones with the corresponding plas - tic plug caps supplied in the bag con - taining the instruction booklet. 7. Connect the water inlet hose ...
-
AEG LN 79680A3 - page 33
Positioning and levelling Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. Before placing it on small tiles, apply a rubb er coatin g. Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine. If it is ...
-
AEG LN 79680A3 - page 34
3. Set the hose correctly by loosening the ring nut. After positioning the inlet hose, be sure to tighten the ring nut again to prevent leaks. 4. Connect the hose to a tap with a 3/4” thread. Always use the hose supplied with the appliance. The inlet hose must not be lengthened. If it is too short and you do not wish to move the tap, you will hav ...
-
AEG LN 79680A3 - page 35
This could be done by tying it to the tap with a piece of string or attaching it to the wall. 2. In a sink drain pipe branch. This branch must be above the trap so that the bend is at least 60 cm above the ground. 3. Directly into a drain pipe at a height of not less than 60 cm and not more than 90 cm. The end of the drain hose must always be venti ...
-
AEG LN 79680A3 - page 36
WARNING! Should the appliance power supply cable need to be replaced, this must be carried out by a Service Centre. ENVIRONMENT CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and e ...
-
AEG LN 79680A3 - page 37
37 ...
-
AEG LN 79680A3 - page 38
38 ...
-
AEG LN 79680A3 - page 39
39 ...
-
AEG LN 79680A3 - page 40
www.aeg.com/shop 132943471-A-282011 ...
¿Tienes una pregunta acerca de AEG LN 79680A3?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con AEG LN 79680A3, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con AEG LN 79680A3 probablemente compartirá una forma de solucionarlo.