-
Zanussi ZDF 221 - page 1
User manual Dishwasher ZDF 221 156999 64/0en 17-03-2006 14:11 Pagina 1 ...
-
Zanussi ZDF 221 - page 2
2 Content Safety information - - - - - - - - - - - - - - - - - -3 Control panel and functions - - - - - - - - - - -4 Programme table - - - - - - - - - - - - - - - - - - -6 Before the first use - - - - - - - - - - - - - - - - -7 Setting the water softener - - - - - - - - - - - - -7 Filling with dishwasher salt - - - - - - - - - - -10 Filling with ri ...
-
Zanussi ZDF 221 - page 3
3 Safety information Correct use ● This dishwasher is only intended for washing household utensils suitable for machine washing. ● Do not put any solvents in the dishwasher . This could cause an explosion. ● Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position ...
-
Zanussi ZDF 221 - page 4
Control panel and functions 4 ● Never use the dishwasher if the electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard. ● All sides of the dishwasher must never ...
-
Zanussi ZDF 221 - page 5
5 Start/Cancel button ● Starting the washing programme: 1. Select a washing programme. 2. Press the Start/Cancel button (corresponding light on). IMPORTANT! Once the programme has started, if you want to change the selection made you must cancel the washing programme in progress. ● Cancel the washing programme in progress: 1. Press and hold the ...
-
Zanussi ZDF 221 - page 6
6 Programme Use Cycle description Programme table Intensive 70°C Heavy soil. Prewash - Main wash A Crockery , cutlery , 2 intermediate rinses - pots and pans Final rinse - Dry Rinse and Hold Any . Prewash E Partial load (to be completed later in the day). This programme does not require the use of detergent. 30 min. Light soil. Main wash- C Crocke ...
-
Zanussi ZDF 221 - page 7
7 Before the first use When using separate special (dishwasher) salt, rinse aid and detergent: - set the water softener - add special (dishwasher) salt - fill up with rinse aid When using tablets that integrate rinse aid and detergent: there is no need to fill up with rinse aid - set the water softener - add special (dishwasher) salt When using tab ...
-
Zanussi ZDF 221 - page 8
8 Water hardness Number of flashes of the Adjustment of the water “end of programme” light hardness setting in Clarke 1) in °TH 2) in mmol/l 3) manually electronically 64 - 88 91 - 125 9,0 - 12,5 10 2 level 10 53 - 63 76 - 90 7,6 - 8,9 9 2 level 9 46 - 52 65 - 75 6,5 - 7,5 8 2 level 8 36 - 45 51 - 64 5,1 - 6,4 7 2 level 7 28 - 35 40 - 50 4,0 - ...
-
Zanussi ZDF 221 - page 9
9 Setting the water softener electronically (see table) The dishwasher must be switched off Release the button. The end of programme indicator light will flash. The number of flashes corresponds to current level set. The end of programme indicator light might flash 5 times, for example. The flashing is repeated every 5 seconds. T o change the level ...
-
Zanussi ZDF 221 - page 10
10 Filling with dishwasher salt Unscrew the cap. Only before filling with salt for the first time , fill the salt container with water Using the funnel provided, pour in the salt until the container is filled with salt. Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click. CAUTION! Use only special salt ...
-
Zanussi ZDF 221 - page 11
11 Filling with rinse aid Open the lid. Fill up with rinse aid. The maximum level for filling is indicated by " max " . Clean up any rinse aid which overflows. Close the lid and press until it locks. CAUTION! Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage ...
-
Zanussi ZDF 221 - page 12
12 Loading cutlery and dishes ● The following items are not suitable for use in the dishwasher: - Cutlery with wooden, horn, china or mother-of-pearl handles - Plastic items that are not heat resistant - Older cutlery with glued parts that are not temperature resistant - Bonded cutlery items or dishes - Pewter or copper items - Lead crystal glass ...
-
Zanussi ZDF 221 - page 13
13 Load upper basket. Light items (plastic bowls etc.) must be loaded in the upper basket and arranged so they do not move. For taller items, the cup racks can be folded upwards. If plates are to be loaded in the upper basket: load them starting from the rear positions; tilting them slightly forwards and avoiding the front positions near the door. ...
-
Zanussi ZDF 221 - page 14
14 Filling with detergent Unloading the dishwasher Open the lid. For programmes with prewash add an additional detergent dose in compartment B. When using detergent tablets: place detergent tablets in compartment A. Close the lid. Fill in the detergent in compartment A. Observe the dosing levels. IMPORTANT! Only use detergents suitable for dishwash ...
-
Zanussi ZDF 221 - page 15
15 Cleaning and care IMPORTANT! NEVER use the dishwasher without filters. Incorrect repositioning and fitting of the filters will produce poor washing results. Cleaning the filters IMPORTANT! NEVER try to remove the spray arms. If residues of soil have clogged the holes in the upper spray arm, remove them with a toothpick. Clean filters A , B and C ...
-
Zanussi ZDF 221 - page 16
16 Environmental concerns External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc....). Ensure that the seals around the door , the detergent and rinse aid dispensers are clea ...
-
Zanussi ZDF 221 - page 17
17 Something not working Fault code / malfunction Possible cause Solution The dishwasher does not fill with water . - continuous flashing of the start/cancel indicator light - 1 flash of the " end of programme " indicator light The dishwasher will not drain. - continuous flashing of the start/cancel indicator light - 2 flashes of the &quo ...
-
Zanussi ZDF 221 - page 18
18 The wash results are not satisfactory The dishes are not clean ● The wrong washing programme has been selected. ● The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. ● The spray arm do not rotate freely due to incorrect arrangement of the load. ● The filters in th ...
-
Zanussi ZDF 221 - page 19
19 Technical data Consumption values Dimensions Width 60 cm Height 85 cm Depth. 61 cm W ater supply pressure Minimum 0,05 MPa (0.5 bar) Maximum 0,8 MPa (8 bar) Electrical connection Information on the electrical connection is given on the rating plate on V oltage - Overall power - Fuse the inner edge of the dishwasher ’s door . Capacity 12 place ...
-
Zanussi ZDF 221 - page 20
20 Hints for test institutes T esting in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Consumption values"). T est in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the ...
-
Zanussi ZDF 221 - page 21
21 CAUTION! If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. Inlet hose Connect the inlet hose to a water tap with an external thread of 3/4”. The inlet hose can be turned either to the left or the right to suit the installation ...
-
Zanussi ZDF 221 - page 22
22 Ensure that the hoses are not kinked, crushed or entangled. CAUTION! Always be sure, that there is no water leakage from hoses and their connections after the installation. WARNING! Multi-way plugs, connectors and extension cables must not be used. This could constitute a fire hazard through overheating. If necessary , have the domestic wiring s ...
-
Zanussi ZDF 221 - page 23
23 Fitting under a counter By removing the dishwasher ’s worktop, you can install it under a close fitting sink unit or a pre-existing top. Be sure that once the appliance has been installed, it is easily accessible for the service engineer in the event that a repair is required. Unscrew the two screws at the rear . Push the top backwards about 1 ...
-
Zanussi ZDF 221 - page 24
Service and spare parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre an ...
-
Zanussi ZDF 221 - page 25
25 Guarantee conditions Standard Guarantee Conditions We, Zanussi-Electrolux, undertake that if within 12 months of the date of purchase this ZANUSSI-ELECTROLUX appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour , mate ...
-
Zanussi ZDF 221 - page 26
This appliance is guaranteed by Electrolux, in each of the countries listed in the following page, for the period specified in the appliance guarantee or otherwise by law . If you move from one of these countries to another of these countries the appliance guarantee will move with you subject to the following qualifications: ● The appliance guara ...
-
Zanussi ZDF 221 - page 27
27 www.electrolux.com Albania +35 5 4 261 450 Rr . Pjeter Bogdani Nr . 7 Tirane Belgique/België/Belgien +32 2 363 04 44 Bergensesteenweg 719, 1502 Lembeek Danmark +45 70 1 1 74 00 Sjællandsgade 2, 7000 Fredericia Eesti +37 2 66 50 030 Mustamäe tee 24, 10621 T allinn France www .electrolux.fr Hellas +30 23 10 56 19 70 4 Limnou Str ., 54627 Thessa ...
-
Zanussi ZDF 221 - page 28
www .electrolux.com www .zanussi-electrolux.co.uk Subject to change without notice 156999 64/0 156999 64/0en 17-03-2006 14:12 Pagina 28 ...
¿Tienes una pregunta acerca de Zanussi ZDF 221?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Zanussi ZDF 221, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Zanussi ZDF 221 probablemente compartirá una forma de solucionarlo.