-
Weslo WATL16105.0 - page 1
USER'S MANUAL Serial Number Decal Model No. WATL16105.0 S erial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. QUESTIONS? If you have questions, or if any par ts are missing or damaged, PLEASE CONTACT OUR CUS- TOMER SERVICE DEPARTMENT DIRECTLY. Call toll-fr ...
-
Weslo WATL16105.0 - page 2
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . ...
-
Weslo WATL16105.0 - page 3
3 W ARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the f ollowing important precautions and information before operating the treadmill. IMPORT ANT PRECAUTIONS 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the ...
-
Weslo WATL16105.0 - page 4
4 The decals shown at the right have been placed on the treadmill. If a decal is missing or illegible, call the tele- phone number on the front cover of this manual and order a free replacement decal. Apply the decal in the lo- catio n sho wn. Note: The decals are not shown at actual size. NOT SHOWN A T ACTUAL SIZE 2 2. Inspect and properly tighten ...
-
Weslo WATL16105.0 - page 5
5 Thank you for selecting the WESLO ® A-40 treadmill. The A-40 treadmill combines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and p rivacy of y our h ome. And when you’re not exercising, the unique A-40 tread mill can be folded up, requiring less than half the floor ...
-
Weslo WATL16105.0 - page 6
6 ASSEMBL Y A ssembly requires two persons. S et the treadmill in a cleared area and remove all packing materials. D o not remo ve t he long wire inside of the right handrail yet. In addition, do not disp ose of t he p acki ng m ateri als until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance ...
-
Weslo WATL16105.0 - page 7
7 5. Hold the Console Base (1) near the Right Handrail (6). Touch the Right Handrail to discharge any static. Insert the end of the Wire Harness (22) through the three looped plastic ties. Next, press the end of the Wire Harness into the connector on the back of the Console Base (1) in the location shown. The end of the Wire Harness should slide ea ...
-
Weslo WATL16105.0 - page 8
9. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex key in a secure place; the hex key is used to adjust the walking belt (see page 14). To protect the floor or carpet, place a mat under the treadmill. 8. Carefully lower the Handrails (6, 7) to the floor. Center the Frame (55) between the Handrails ...
-
Weslo WATL16105.0 - page 9
9 OPERA TION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- c one spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER CO ...
-
Weslo WATL16105.0 - page 10
10 DIAGRAM OF THE CONSOLE ETW A16105 Clip Key Note: If there is a sheet of clear plastic on the console, remove the plastic. STEP-BY-STEP CONSOLE OPERATION Before operating the con- sole, make sure that the power cord is properly plugged in (see page 9). Next, locate the reset/off cir- cuit breaker on the treadmill frame near the power cord, and ma ...
-
Weslo WATL16105.0 - page 11
1 1 To stop the walking belt, press the Stop button. If the elapsed time is shown in the display (see step 3 ), the time will begin to flash. Note: The first time the treadmill is used, observe the alignment of the walking belt, and center the walking belt if necessary (see page 14). Monitor your progress with the display. As you exer- cise, the lo ...
-
Weslo WATL16105.0 - page 12
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the t readmill. 1. Hold the metal frame firmly in the location shown by the arrow at the right. CAUTION: To decrease the pos- sibility of injury, do not lift the frame by ...
-
Weslo WATL16105.0 - page 13
13 MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a properly earth ...
-
Weslo WATL16105.0 - page 14
14 PROBLEM: The walking belt slows when walked on S OLUTION: a . I f an extension cord is needed, use only a 3-conductor, 1mm 2 ( 14-gauge) cord that is no longer than 1.5 m (5 ft.). b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD . Usi ...
-
Weslo WATL16105.0 - page 15
15 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with ...
-
Weslo WATL16105.0 - page 16
P ART LIST—Model No. W A TL16105.0 R0306A Key No. Qty. Description 1 1 Console 2 4 Round Endcap 3 1 Key/Clip 4 1 Console Back 5 8 Electronics Screw 6 1 Right Handrail 7 1 Left Handrail 8 4 Hood Screw 9 2 Motor Tension Bolt 10 2 Frame Bolt 11 2 Rear Roller Bracket Screw 12 4 Handrail Bolt 13 2 Frame Spacer 14 2 Wheel Bolt 15 2 Wheel 16 1 Right Rea ...
-
Weslo WATL16105.0 - page 17
Handrail W asher (1 1)–2 2 3/4” Bolt (47)–4 Star W asher (81)–4 W asher (29)–4 3 Handrail Nut (17)–4 C Frame Bolt (10)–2 Wheel Bolt (14)–2 Console Screw (70)–4 Nut (17)–6 Base Pad Screw (42)–6 Handrail Star W asher (60)–2 Handrail W asher (30)–2 Handrail Bolt (12)–4 16mm Screw (87)–6 4 ” Bolt (120)–2 Remove this ch ...
-
Weslo WATL16105.0 - page 18
65 81 20 20 27 29 61 57 55 47 56 37 26 49 46 5 48 76 27 25 1 3 6 71 2 17 15 15 14 17 17 23 88 21 13 10 13 7 17 30 60 30 10 60 68 68 51 66 22 12 12 22 19 42 42 19 42 18 2 70 2 4 87 87 87 63 9 39 38 36 43 75 19 70 19 42 19 42 14 42 19 40 40 8 20 20 20 8 8 52 47 20 1 1 63 64 64 52 52 52 52 51 66 52 52 69 69 50 87 41 32 5 35 5 5 80 9 52 20 77 77 20 59 ...
-
Weslo WATL16105.0 - page 19
Part No. 236099 R0306A Printed in China © 2006 ICON IP, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, call our Customer Service Department toll-free at 800-830-7240, or call: When ordering parts, please be prepared to provide the following information: • the MODEL NUMBER of the product (WATL16105.0) • the NAME of the product (WE ...
¿Tienes una pregunta acerca de Weslo WATL16105.0?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Weslo WATL16105.0, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Weslo WATL16105.0 probablemente compartirá una forma de solucionarlo.