Español dropdown-ico

Manual de instrucciones JVC TH-G40

118 de páginas 4.57 mb
Descargar

Pasar a la página of 118

Summary
  • JVC TH-G40 - page 1

    TH-G40 Consists of XV -THG40 and SP-THG50C/F/W DVD DIGIT AL THEA TER SYSTEM INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No. L VT1881-001A [J] HT993SJ_ENG TUNING TUNING ...

  • JVC TH-G40 - page 2

    G-1 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert ...

  • JVC TH-G40 - page 3

    G-2 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future reference. 3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to. 4. ...

  • JVC TH-G40 - page 4

    1 Introduction . . . . . . . . . . . . . . . . . . .2-5 About the Symbol Display . . . . . . . . . . . . . .2 Symbol Used in this Manual . . . . . . . . . . . . . . .2 Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .2 Handling Discs . . . . . . . . . . . . . . . . ...

  • JVC TH-G40 - page 5

    Operation Reference Installation and Setup 2 To ensure proper use of this product, please read this owner ’s manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your DVD player . Should the unit require service, contact an authorized service location. About the Symbol Display ? ...

  • JVC TH-G40 - page 6

    3 T ypes of Playable Discs DVD (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD± R/RW and CD-R/RW , Dual disc that contains audio titles, MP3, WMA, and/or JPEG files. Notes: • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD± R/RW) disc itself, some CD-R/RW (or DVD± R/RW) discs may ...

  • JVC TH-G40 - page 7

    Operation Reference Installation and Setup 4 Introduction Front Panel a 1 1 / / ' ' (ST ANDBY/ON) Switches the unit ON and OFF . b Disc T ray Insert a disc here. c AUDIO IN The AUDIO IN port means you can connect a audio device to play through the surround sound speakers. d Z (OPEN/CLOSE) Opens or closes the disc tray . e B (PLA Y) Starts ...

  • JVC TH-G40 - page 8

    5 Remote Control Remote Control operation Point the remote control at the remote sensor and press the buttons. Cautions: • Do not mix old and new batteries and never mix different types of batteries such as standard, alkaline, etc. • Do not put the batteries in the place where young children can reach. • Battery shall not be exposed to excess ...

  • JVC TH-G40 - page 9

    Operation Reference Introduction 6 Installation and Setup TV Connection Make one of the following connections, depending on the capabilities of your existing equipment. Tips:   Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver . Use one of the connections described below ...

  • JVC TH-G40 - page 10

    7 Optional Equipment Connection AUX IN connection (A) Connect a Output of auxiliary device to the AUX AUDIO Input (L/R) Connector . OPTICAL IN connection (O) Connect an optical output of DVD Player (or Digital Device etc) to the OPTICAL IN connector . AUDIO IN connection (D) Connect a output of portable device (MP3 or PMP etc) to the AUDIO input co ...

  • JVC TH-G40 - page 11

    8 HDMI Connection About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easy all- digital output to an HDMI or DI-equipped TV . Connection to an HDMI TV requires an HDMI cable while connection to a DVI-equipped TV requires a DVI adapter besides a HDMI cable. HDMI has the capabilit ...

  • JVC TH-G40 - page 12

    9 Speaker System Connection Connect the speakers using the supplied speaker cables. To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.). Notes: • Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be dist ...

  • JVC TH-G40 - page 13

    Operation Reference Introduction 10 Installation and Setup Displaying Disc Information on-screen Y ou can display various information about the disc loaded on-screen. 1. Press DISPLA Y to show various playback information. The displayed items differ depending on the disc type or playing status. 2. Y ou can select an item by pressing v / V and chang ...

  • JVC TH-G40 - page 14

    11 General Operation 1. Press SETUP . The Setup menu appears. 2. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 3. Use v / V to select the second desired option and then press B to move to the third level. 4. Use v / V to s ...

  • JVC TH-G40 - page 15

    Operation Reference Introduction 12 Installation and Setup AUDIO Each DVD disc has a variety of audio output options. Set the player ’s AUDIO options according to the type of audio system you use. Dynamic Range Control (DRC) With the DVD* 1 format, you can hear a program’s soundtrack in the most accurate and realistic presentation, thanks to di ...

  • JVC TH-G40 - page 16

    13 5.1 Speaker Setup T est Press b / B to test the signals of each speaker . Adjust the volume to match the volume of test signals memorized in the system. Front Left (Front L) → Center → Front Right (Front R) → Rear Right (Rear R) → Rear Left (Rear L) → SubWoofer LOCK (Parental Control) Initial Setting the Area Code: See the Area Codes o ...

  • JVC TH-G40 - page 17

    14 Operation Operation General features Buttons Operations Z (OPEN / CLOSE) Opens or closes the disc tray . X (P AUSE) During playback, press X to pause playback. Press X repeatedly to play Frame-by-Frame. SKIP ( . / > ) During playback, press SKIP ( . or > ) to go to the next chapter/track or to return to the beginning of the current chapter ...

  • JVC TH-G40 - page 18

    15 Additional features T ime Search To start playing at any chosen time on the disc: 1. Press DISPLA Y during playback. 2. Press v / V to select the time clock icon and “--:--:--” appears. 3. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you ent ...

  • JVC TH-G40 - page 19

    16 Operation Playing an Audio CD or MP3/WMA file This unit can play Audio CDs or MP3/WMA files. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recording media or Audio CD a menu appears on the TV screen. Press v / V to select a track/file and then press PLA Y or ENTER, and playback starts. Y ou can use variable playback functions. Refer to the ...

  • JVC TH-G40 - page 20

    17 Programmed Playback The program function enables you to store your Favourite tracks from any disc in the receiver memory . A program can contain 300 tracks. 1. Insert a disc. Audio CD and MP3/WMA Discs: 2. Select a track on the “List” and then press PROG. or select “ (Add)” icon and then press ENTER to place the selected track on the “ ...

  • JVC TH-G40 - page 21

    18 Operation Vi ewing a JPEG file This unit can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on the right. 1. Insert a disc and close the tray . The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder, and then press ENTER. A list of files in the folder appears. If you are in a fil ...

  • JVC TH-G40 - page 22

    19 Using iPod Y ou can enjoy playback of your iPod using the supplied remote control. iPod is a trademark of Apple Computer , Inc, registered in the U.S. and other countries. General operation 1. Connect the iPod and the unit with iPod docking station. Refer to the page 7. 2. T urn the unit on. Y our iPod is automatically turned on. 3. Press INPUT ...

  • JVC TH-G40 - page 23

    20 Operation Playing the iPod in the OSD iPod mode Y ou can operate your iPod by controlling OSD menu on the TV screen with the supplied remote control. The controls on your iPod are not operational in the OSD iPod mode. If you want to charge the iPod while listening music, selects the OSD iPod mode. 1. Press INPUT on the Remote Control until “OS ...

  • JVC TH-G40 - page 24

    21 Presetting the Radio Stations Y ou can preset 50 stations for FM. Before tuning, make sure that you have turned down the volume. 1. Press FUNCTION on the remote control until FM appears in the display window . 2. Press and hold TUNNING.(-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when ...

  • JVC TH-G40 - page 25

    22 Sleep Timer Setting Y ou can set the DVD/CD Receiver to turn off automatically at a specified time. 1. Press SLEEP to set the desired sleep time. The SLEEP indicator and the sleep time appears in the display window . 2. Each time you press SLEEP the setting changes in the following order . SLEEP 180 → 150 → 120 → 90 → 80 → 70 → 60 ? ...

  • JVC TH-G40 - page 26

    23 Area Code Afghanistan AF Argentina AR Australia AU Austria A T Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG Costa Rica CR Croatia HR Czech Republic CZ Denmark DK Ecuador EC Egypt EG El Salvador SV Area Code Ethiopia ET Fiji FJ Finland FI France FR Germany DE Great Britain GB Greece GR Gre ...

  • JVC TH-G40 - page 27

    24 Reference T roubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom No power . The power is on, but the DVD/CD Receiver does not work. No picture. There is no sound or only a very low-level sound is heard. The playback picture is poor . The DVD/CD Receiver does not start playback. Loud hum ...

  • JVC TH-G40 - page 28

    25 Symptom Radio stations cannot be tuned in. The remote control does not work properly . The front panel display is too dim. Cause • The antenna is positioned or connected poorly . • The signal strength of the stations is too weak (when tuning in with automatic tuning). • No stations have been preset or preset stations have been cleared (whe ...

  • JVC TH-G40 - page 29

    26 Reference ❋ Designs and specifications are subject to change without notice. Specifications General CD/DVD V ideo Amplifier Speakers T uner FM Power supply Refer to main label. Power consumption Refer to main label. Net Weight 4 kg External dimensions (W x H x D) 430 x 72 x 307 mm Operating conditions T emperature: 5°C to 35°C, Operation sta ...

  • JVC TH-G40 - page 30

    27 W W ARRANTY ARRANTY (Only in U.S.A.) (Only in U.S.A.) ...

  • JVC TH-G40 - page 31

    0208SKMLGEEGL TH-G40 ...

  • JVC TH-G40 - page 32

    TH-G30 Consists of XV -THG30 and SP-THG50C/F/W DVD DIGIT AL THEA TER SYSTEM INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located on the rear of cabinet. Retain this information for future reference. Model No. Serial No. L VT1880-001A [J] HT993SJ_ENG TUNING TUNING ...

  • JVC TH-G40 - page 33

    G-1 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert ...

  • JVC TH-G40 - page 34

    G-2 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future reference. 3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to. 4. ...

  • JVC TH-G40 - page 35

    1 Introduction . . . . . . . . . . . . . . . . . . .2-5 About the Symbol Display . . . . . . . . . . . . . .2 Symbol Used in this Manual . . . . . . . . . . . . . . .2 Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .2 Handling Discs . . . . . . . . . . . . . . . . ...

  • JVC TH-G40 - page 36

    Operation Reference Installation and Setup 2 To ensure proper use of this product, please read this owner ’s manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your DVD player . Should the unit require service, contact an authorized service location. About the Symbol Display ? ...

  • JVC TH-G40 - page 37

    3 T ypes of Playable Discs DVD (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD± R/RW and CD-R/RW , Dual disc that contains audio titles, MP3, WMA, and/or JPEG files. Notes: • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD± R/RW) disc itself, some CD-R/RW (or DVD± R/RW) discs may ...

  • JVC TH-G40 - page 38

    Operation Reference Installation and Setup 4 Introduction Front Panel a 1 1 / / ' ' (ST ANDBY/ON) Switches the unit ON and OFF . b Disc T ray Insert a disc here. c AUDIO IN The AUDIO IN port means you can connect a audio device to play through the surround sound speakers. d Z (OPEN/CLOSE) Opens or closes the disc tray . e B (PLA Y) Starts ...

  • JVC TH-G40 - page 39

    5 Remote Control Remote Control operation Point the remote control at the remote sensor and press the buttons. Cautions: • Do not mix old and new batteries and never mix different types of batteries such as standard, alkaline, etc. • Do not put the batteries in the place where young children can reach. • Battery shall not be exposed to excess ...

  • JVC TH-G40 - page 40

    Operation Reference Introduction 6 Installation and Setup TV Connection Make one of the following connections, depending on the capabilities of your existing equipment. Tips:   Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver . Use one of the connections described below ...

  • JVC TH-G40 - page 41

    7 Optional Equipment Connection AUX IN connection (A) Connect a Output of auxiliary device to the AUX AUDIO Input (L/R) Connector . OPTICAL IN connection (O) Connect an optical output of DVD Player (or Digital Device etc) to the OPTICAL IN connector . AUDIO IN connection (D) Connect a output of portable device (MP3 or PMP etc) to the AUDIO input co ...

  • JVC TH-G40 - page 42

    8 HDMI Connection About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easy all- digital output to an HDMI or DI-equipped TV . Connection to an HDMI TV requires an HDMI cable while connection to a DVI-equipped TV requires a DVI adapter besides a HDMI cable. HDMI has the capabilit ...

  • JVC TH-G40 - page 43

    9 Speaker System Connection Connect the speakers using the supplied speaker cables. To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.). Notes: • Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be dist ...

  • JVC TH-G40 - page 44

    Operation Reference Introduction 10 Installation and Setup Displaying Disc Information on-screen Y ou can display various information about the disc loaded on-screen. 1. Press DISPLA Y to show various playback information. The displayed items differ depending on the disc type or playing status. 2. Y ou can select an item by pressing v / V and chang ...

  • JVC TH-G40 - page 45

    11 General Operation 1. Press SETUP . The Setup menu appears. 2. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 3. Use v / V to select the second desired option and then press B to move to the third level. 4. Use v / V to s ...

  • JVC TH-G40 - page 46

    Operation Reference Introduction 12 Installation and Setup AUDIO Each DVD disc has a variety of audio output options. Set the player ’s AUDIO options according to the type of audio system you use. Dynamic Range Control (DRC) With the DVD* 1 format, you can hear a program’s soundtrack in the most accurate and realistic presentation, thanks to di ...

  • JVC TH-G40 - page 47

    13 5.1 Speaker Setup T est Press b / B to test the signals of each speaker . Adjust the volume to match the volume of test signals memorized in the system. Front Left (Front L) → Center → Front Right (Front R) → Rear Right (Rear R) → Rear Left (Rear L) → SubWoofer LOCK (Parental Control) Initial Setting the Area Code: See the Area Codes o ...

  • JVC TH-G40 - page 48

    14 Operation Operation General features Buttons Operations Z (OPEN / CLOSE) Opens or closes the disc tray . X (P AUSE) During playback, press X to pause playback. Press X repeatedly to play Frame-by-Frame. SKIP ( . / > ) During playback, press SKIP ( . or > ) to go to the next chapter/track or to return to the beginning of the current chapter ...

  • JVC TH-G40 - page 49

    15 Additional features T ime Search To start playing at any chosen time on the disc: 1. Press DISPLA Y during playback. 2. Press v / V to select the time clock icon and “--:--:--” appears. 3. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you ent ...

  • JVC TH-G40 - page 50

    16 Operation Playing an Audio CD or MP3/WMA file This unit can play Audio CDs or MP3/WMA files. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recording media or Audio CD a menu appears on the TV screen. Press v / V to select a track/file and then press PLA Y or ENTER, and playback starts. Y ou can use variable playback functions. Refer to the ...

  • JVC TH-G40 - page 51

    17 Programmed Playback The program function enables you to store your Favourite tracks from any disc in the receiver memory . A program can contain 300 tracks. 1. Insert a disc. Audio CD and MP3/WMA Discs: 2. Select a track on the “List” and then press PROG. or select “ (Add)” icon and then press ENTER to place the selected track on the “ ...

  • JVC TH-G40 - page 52

    18 Operation Vi ewing a JPEG file This unit can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on the right. 1. Insert a disc and close the tray . The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder, and then press ENTER. A list of files in the folder appears. If you are in a fil ...

  • JVC TH-G40 - page 53

    19 Presetting the Radio Stations Y ou can preset 50 stations for FM. Before tuning, make sure that you have turned down the volume. 1. Press FUNCTION on the remote control until FM appears in the display window . 2. Press and hold TUNNING.(-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when ...

  • JVC TH-G40 - page 54

    20 Sleep Timer Setting Y ou can set the DVD/CD Receiver to turn off automatically at a specified time. 1. Press SLEEP to set the desired sleep time. The SLEEP indicator and the sleep time appears in the display window . 2. Each time you press SLEEP the setting changes in the following order . SLEEP 180 → 150 → 120 → 90 → 80 → 70 → 60 ? ...

  • JVC TH-G40 - page 55

    21 Area Code Afghanistan AF Argentina AR Australia AU Austria A T Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG Costa Rica CR Croatia HR Czech Republic CZ Denmark DK Ecuador EC Egypt EG El Salvador SV Area Code Ethiopia ET Fiji FJ Finland FI France FR Germany DE Great Britain GB Greece GR Gre ...

  • JVC TH-G40 - page 56

    22 Reference T roubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom No power . The power is on, but the DVD/CD Receiver does not work. No picture. There is no sound or only a very low-level sound is heard. The playback picture is poor . The DVD/CD Receiver does not start playback. Loud hum ...

  • JVC TH-G40 - page 57

    23 Symptom Radio stations cannot be tuned in. The remote control does not work properly . The front panel display is too dim. Cause • The antenna is positioned or connected poorly . • The signal strength of the stations is too weak (when tuning in with automatic tuning). • No stations have been preset or preset stations have been cleared (whe ...

  • JVC TH-G40 - page 58

    24 Reference ❋ Designs and specifications are subject to change without notice. Specifications General CD/DVD V ideo Amplifier Speakers T uner FM Power supply Refer to main label. Power consumption Refer to main label. Net Weight 4 kg External dimensions (W x H x D) 430 x 72 x 307 mm Operating conditions T emperature: 5°C to 35°C, Operation sta ...

  • JVC TH-G40 - page 59

    25 W W ARRANTY ARRANTY (Only in U.S.A.) (Only in U.S.A.) ...

  • JVC TH-G40 - page 60

    0208SKMLGEEGL TH-G30 ...

  • JVC TH-G40 - page 61

    TH-G40 Consists of XV -THG40 and SP-THG50C/F/W DVD DIGIT AL THEA TER SYSTEM INSTRUCTIONS L VT1881-002A [C] HT993SJ_ENG TUNING TUNING ...

  • JVC TH-G40 - page 62

    G-1 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert ...

  • JVC TH-G40 - page 63

    G-2 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future reference. 3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to. 4. ...

  • JVC TH-G40 - page 64

    1 Introduction . . . . . . . . . . . . . . . . . . .2-5 About the Symbol Display . . . . . . . . . . . . . .2 Symbol Used in this Manual . . . . . . . . . . . . . . .2 Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .2 Handling Discs . . . . . . . . . . . . . . . . ...

  • JVC TH-G40 - page 65

    Operation Reference Installation and Setup 2 To ensure proper use of this product, please read this owner ’s manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your DVD player . Should the unit require service, contact an authorized service location. About the Symbol Display ? ...

  • JVC TH-G40 - page 66

    3 T ypes of Playable Discs DVD (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD± R/RW and CD-R/RW , Dual disc that contains audio titles, MP3, WMA, and/or JPEG files. Notes: • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD± R/RW) disc itself, some CD-R/RW (or DVD± R/RW) discs may ...

  • JVC TH-G40 - page 67

    Operation Reference Installation and Setup 4 Introduction Front Panel a 1 1 / / ' ' (ST ANDBY/ON) Switches the unit ON and OFF . b Disc T ray Insert a disc here. c AUDIO IN The AUDIO IN port means you can connect a audio device to play through the surround sound speakers. d Z (OPEN/CLOSE) Opens or closes the disc tray . e B (PLA Y) Starts ...

  • JVC TH-G40 - page 68

    5 Remote Control Remote Control operation Point the remote control at the remote sensor and press the buttons. Cautions: • Do not mix old and new batteries and never mix different types of batteries such as standard, alkaline, etc. • Do not put the batteries in the place where young children can reach. • Battery shall not be exposed to excess ...

  • JVC TH-G40 - page 69

    Operation Reference Introduction 6 Installation and Setup TV Connection Make one of the following connections, depending on the capabilities of your existing equipment. Tips:   Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver . Use one of the connections described below ...

  • JVC TH-G40 - page 70

    7 Optional Equipment Connection AUX IN connection (A) Connect a Output of auxiliary device to the AUX AUDIO Input (L/R) Connector . OPTICAL IN connection (O) Connect an optical output of DVD Player (or Digital Device etc) to the OPTICAL IN connector . AUDIO IN connection (D) Connect a output of portable device (MP3 or PMP etc) to the AUDIO input co ...

  • JVC TH-G40 - page 71

    8 HDMI Connection About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easy all- digital output to an HDMI or DI-equipped TV . Connection to an HDMI TV requires an HDMI cable while connection to a DVI-equipped TV requires a DVI adapter besides a HDMI cable. HDMI has the capabilit ...

  • JVC TH-G40 - page 72

    9 Speaker System Connection Connect the speakers using the supplied speaker cables. To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.). Notes: • Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be dist ...

  • JVC TH-G40 - page 73

    Operation Reference Introduction 10 Installation and Setup Displaying Disc Information on-screen Y ou can display various information about the disc loaded on-screen. 1. Press DISPLA Y to show various playback information. The displayed items differ depending on the disc type or playing status. 2. Y ou can select an item by pressing v / V and chang ...

  • JVC TH-G40 - page 74

    11 General Operation 1. Press SETUP . The Setup menu appears. 2. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 3. Use v / V to select the second desired option and then press B to move to the third level. 4. Use v / V to s ...

  • JVC TH-G40 - page 75

    Operation Reference Introduction 12 Installation and Setup AUDIO Each DVD disc has a variety of audio output options. Set the player ’s AUDIO options according to the type of audio system you use. Dynamic Range Control (DRC) With the DVD* 1 format, you can hear a program’s soundtrack in the most accurate and realistic presentation, thanks to di ...

  • JVC TH-G40 - page 76

    13 5.1 Speaker Setup T est Press b / B to test the signals of each speaker . Adjust the volume to match the volume of test signals memorized in the system. Front Left (Front L) → Center → Front Right (Front R) → Rear Right (Rear R) → Rear Left (Rear L) → SubWoofer LOCK (Parental Control) Initial Setting the Area Code: See the Area Codes o ...

  • JVC TH-G40 - page 77

    14 Operation Operation General features Buttons Operations Z (OPEN / CLOSE) Opens or closes the disc tray . X (P AUSE) During playback, press X to pause playback. Press X repeatedly to play Frame-by-Frame. SKIP ( . / > ) During playback, press SKIP ( . or > ) to go to the next chapter/track or to return to the beginning of the current chapter ...

  • JVC TH-G40 - page 78

    15 Additional features T ime Search To start playing at any chosen time on the disc: 1. Press DISPLA Y during playback. 2. Press v / V to select the time clock icon and “--:--:--” appears. 3. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you ent ...

  • JVC TH-G40 - page 79

    16 Operation Playing an Audio CD or MP3/WMA file This unit can play Audio CDs or MP3/WMA files. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recording media or Audio CD a menu appears on the TV screen. Press v / V to select a track/file and then press PLA Y or ENTER, and playback starts. Y ou can use variable playback functions. Refer to the ...

  • JVC TH-G40 - page 80

    17 Programmed Playback The program function enables you to store your Favourite tracks from any disc in the receiver memory . A program can contain 300 tracks. 1. Insert a disc. Audio CD and MP3/WMA Discs: 2. Select a track on the “List” and then press PROG. or select “ (Add)” icon and then press ENTER to place the selected track on the “ ...

  • JVC TH-G40 - page 81

    18 Operation V iewing a JPEG file This unit can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on the right. 1. Insert a disc and close the tray . The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder, and then press ENTER. A list of files in the folder appears. If you are in a fil ...

  • JVC TH-G40 - page 82

    19 Using iPod Y ou can enjoy playback of your iPod using the supplied remote control. iPod is a trademark of Apple Computer , Inc, registered in the U.S. and other countries. General operation 1. Connect the iPod and the unit with iPod docking station. Refer to the page 7. 2. T urn the unit on. Y our iPod is automatically turned on. 3. Press INPUT ...

  • JVC TH-G40 - page 83

    20 Operation Playing the iPod in the OSD iPod mode Y ou can operate your iPod by controlling OSD menu on the TV screen with the supplied remote control. The controls on your iPod are not operational in the OSD iPod mode. If you want to charge the iPod while listening music, selects the OSD iPod mode. 1. Press INPUT on the Remote Control until “OS ...

  • JVC TH-G40 - page 84

    21 Presetting the Radio Stations Y ou can preset 50 stations for FM. Before tuning, make sure that you have turned down the volume. 1. Press FUNCTION on the remote control until FM appears in the display window . 2. Press and hold TUNING.(-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when t ...

  • JVC TH-G40 - page 85

    22 Sleep T imer Setting Y ou can set the DVD/CD Receiver to turn off automatically at a specified time. 1. Press SLEEP to set the desired sleep time. The SLEEP indicator and the sleep time appears in the display window . 2. Each time you press SLEEP the setting changes in the following order . SLEEP 180 → 150 → 120 → 90 → 80 → 70 → 60 ? ...

  • JVC TH-G40 - page 86

    23 Area Code Afghanistan AF Argentina AR Australia AU Austria A T Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG Costa Rica CR Croatia HR Czech Republic CZ Denmark DK Ecuador EC Egypt EG El Salvador SV Area Code Ethiopia ET Fiji FJ Finland FI France FR Germany DE Great Britain GB Greece GR Gre ...

  • JVC TH-G40 - page 87

    24 Reference T roubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom No power . The power is on, but the DVD/CD Receiver does not work. No picture. There is no sound or only a very low-level sound is heard. The playback picture is poor . The DVD/CD Receiver does not start playback. Loud hum ...

  • JVC TH-G40 - page 88

    25 Symptom Radio stations cannot be tuned in. The remote control does not work properly . The front panel display is too dim. Cause • The antenna is positioned or connected poorly . • The signal strength of the stations is too weak (when tuning in with automatic tuning). • No stations have been preset or preset stations have been cleared (whe ...

  • JVC TH-G40 - page 89

    26 Reference ❋ Designs and specifications are subject to change without notice. Specifications General CD/DVD V ideo Amplifier Speakers T uner FM Power supply 120 V ~ 60 Hz Power consumption 130 W Net Weight 4 kg External dimensions (W x H x D) 430 x 72 x 307 mm Operating conditions T emperature: 5°C to 35°C, Operation status: Horizontal Operat ...

  • JVC TH-G40 - page 90

    0408SKMLGEEGL TH-G40 2008 Victor Company of Japan, Limited EN ...

  • JVC TH-G40 - page 91

    TH-G30 Consists of XV -THG30 and SP-THG50C/F/W DVD DIGIT AL THEA TER SYSTEM INSTRUCTIONS L VT1880-002A [C] HT993SJ_ENG TUNING TUNING ...

  • JVC TH-G40 - page 92

    G-1 This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert ...

  • JVC TH-G40 - page 93

    G-2 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future reference. 3. Heed all warnings. - All warnings on the product and in the operating instructions should be adhered to. 4. ...

  • JVC TH-G40 - page 94

    1 Introduction . . . . . . . . . . . . . . . . . . .2-5 About the Symbol Display . . . . . . . . . . . . . .2 Symbol Used in this Manual . . . . . . . . . . . . . . .2 Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . .2 Handling Discs . . . . . . . . . . . . . . . . ...

  • JVC TH-G40 - page 95

    Operation Reference Installation and Setup 2 To ensure proper use of this product, please read this owner ’s manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your DVD player . Should the unit require service, contact an authorized service location. About the Symbol Display ? ...

  • JVC TH-G40 - page 96

    3 T ypes of Playable Discs DVD (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit plays DVD± R/RW and CD-R/RW , Dual disc that contains audio titles, MP3, WMA, and/or JPEG files. Notes: • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD± R/RW) disc itself, some CD-R/RW (or DVD± R/RW) discs may ...

  • JVC TH-G40 - page 97

    Operation Reference Installation and Setup 4 Introduction Front Panel a 1 1 / / ' ' (ST ANDBY/ON) Switches the unit ON and OFF . b Disc T ray Insert a disc here. c AUDIO IN The AUDIO IN port means you can connect a audio device to play through the surround sound speakers. d Z (OPEN/CLOSE) Opens or closes the disc tray . e B (PLA Y) Starts ...

  • JVC TH-G40 - page 98

    5 Remote Control Remote Control operation Point the remote control at the remote sensor and press the buttons. Cautions: • Do not mix old and new batteries and never mix different types of batteries such as standard, alkaline, etc. • Do not put the batteries in the place where young children can reach. • Battery shall not be exposed to excess ...

  • JVC TH-G40 - page 99

    Operation Reference Introduction 6 Installation and Setup TV Connection Make one of the following connections, depending on the capabilities of your existing equipment. Tips:   Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver . Use one of the connections described below ...

  • JVC TH-G40 - page 100

    7 Optional Equipment Connection AUX IN connection (A) Connect a Output of auxiliary device to the AUX AUDIO Input (L/R) Connector . OPTICAL IN connection (O) Connect an optical output of DVD Player (or Digital Device etc) to the OPTICAL IN connector . AUDIO IN connection (D) Connect a output of portable device (MP3 or PMP etc) to the AUDIO input co ...

  • JVC TH-G40 - page 101

    8 HDMI Connection About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easy all- digital output to an HDMI or DI-equipped TV . Connection to an HDMI TV requires an HDMI cable while connection to a DVI-equipped TV requires a DVI adapter besides a HDMI cable. HDMI has the capabilit ...

  • JVC TH-G40 - page 102

    9 Speaker System Connection Connect the speakers using the supplied speaker cables. To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.). Notes: • Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be dist ...

  • JVC TH-G40 - page 103

    Operation Reference Introduction 10 Installation and Setup Displaying Disc Information on-screen Y ou can display various information about the disc loaded on-screen. 1. Press DISPLA Y to show various playback information. The displayed items differ depending on the disc type or playing status. 2. Y ou can select an item by pressing v / V and chang ...

  • JVC TH-G40 - page 104

    11 General Operation 1. Press SETUP . The Setup menu appears. 2. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 3. Use v / V to select the second desired option and then press B to move to the third level. 4. Use v / V to s ...

  • JVC TH-G40 - page 105

    Operation Reference Introduction 12 Installation and Setup AUDIO Each DVD disc has a variety of audio output options. Set the player ’s AUDIO options according to the type of audio system you use. Dynamic Range Control (DRC) With the DVD* 1 format, you can hear a program’s soundtrack in the most accurate and realistic presentation, thanks to di ...

  • JVC TH-G40 - page 106

    13 5.1 Speaker Setup T est Press b / B to test the signals of each speaker . Adjust the volume to match the volume of test signals memorized in the system. Front Left (Front L) → Center → Front Right (Front R) → Rear Right (Rear R) → Rear Left (Rear L) → SubWoofer LOCK (Parental Control) Initial Setting the Area Code: See the Area Codes o ...

  • JVC TH-G40 - page 107

    14 Operation Operation General features Buttons Operations Z (OPEN / CLOSE) Opens or closes the disc tray . X (P AUSE) During playback, press X to pause playback. Press X repeatedly to play Frame-by-Frame. SKIP ( . / > ) During playback, press SKIP ( . or > ) to go to the next chapter/track or to return to the beginning of the current chapter ...

  • JVC TH-G40 - page 108

    15 Additional features T ime Search To start playing at any chosen time on the disc: 1. Press DISPLA Y during playback. 2. Press v / V to select the time clock icon and “--:--:--” appears. 3. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you ent ...

  • JVC TH-G40 - page 109

    16 Operation Playing an Audio CD or MP3/WMA file This unit can play Audio CDs or MP3/WMA files. MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recording media or Audio CD a menu appears on the TV screen. Press v / V to select a track/file and then press PLA Y or ENTER, and playback starts. Y ou can use variable playback functions. Refer to the ...

  • JVC TH-G40 - page 110

    17 Programmed Playback The program function enables you to store your Favourite tracks from any disc in the receiver memory . A program can contain 300 tracks. 1. Insert a disc. Audio CD and MP3/WMA Discs: 2. Select a track on the “List” and then press PROG. or select “ (Add)” icon and then press ENTER to place the selected track on the “ ...

  • JVC TH-G40 - page 111

    18 Operation V iewing a JPEG file This unit can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on the right. 1. Insert a disc and close the tray . The PHOTO menu appears on the TV screen. 2. Press v / V to select a folder, and then press ENTER. A list of files in the folder appears. If you are in a fil ...

  • JVC TH-G40 - page 112

    19 Presetting the Radio Stations Y ou can preset 50 stations for FM. Before tuning, make sure that you have turned down the volume. 1. Press FUNCTION on the remote control until FM appears in the display window . 2. Press and hold TUNING.(-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when t ...

  • JVC TH-G40 - page 113

    20 Sleep T imer Setting Y ou can set the DVD/CD Receiver to turn off automatically at a specified time. 1. Press SLEEP to set the desired sleep time. The SLEEP indicator and the sleep time appears in the display window . 2. Each time you press SLEEP the setting changes in the following order . SLEEP 180 → 150 → 120 → 90 → 80 → 70 → 60 ? ...

  • JVC TH-G40 - page 114

    21 Area Code Afghanistan AF Argentina AR Australia AU Austria A T Belgium BE Bhutan BT Bolivia BO Brazil BR Cambodia KH Canada CA Chile CL China CN Colombia CO Congo CG Costa Rica CR Croatia HR Czech Republic CZ Denmark DK Ecuador EC Egypt EG El Salvador SV Area Code Ethiopia ET Fiji FJ Finland FI France FR Germany DE Great Britain GB Greece GR Gre ...

  • JVC TH-G40 - page 115

    22 Reference T roubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom No power . The power is on, but the DVD/CD Receiver does not work. No picture. There is no sound or only a very low-level sound is heard. The playback picture is poor . The DVD/CD Receiver does not start playback. Loud hum ...

  • JVC TH-G40 - page 116

    23 Symptom Radio stations cannot be tuned in. The remote control does not work properly . The front panel display is too dim. Cause • The antenna is positioned or connected poorly . • The signal strength of the stations is too weak (when tuning in with automatic tuning). • No stations have been preset or preset stations have been cleared (whe ...

  • JVC TH-G40 - page 117

    24 Reference ❋ Designs and specifications are subject to change without notice. Specifications General CD/DVD V ideo Amplifier Speakers T uner FM Power supply 120 V ~ 60 Hz Power consumption 130 W Net Weight 4 kg External dimensions (W x H x D) 430 x 72 x 307 mm Operating conditions T emperature: 5°C to 35°C, Operation status: Horizontal Operat ...

  • JVC TH-G40 - page 118

    0408SKMLGEEGL TH-G30 2008 Victor Company of Japan, Limited EN ...

Fabricante JVC Categoría Stereo System

Los documentos del dispositivo JVC TH-G40 que obtenemos del fabricante se pueden dividir en varios grupos. Entre ellos están::
- dibujos técnicos JVC
- manuales de instrucciones TH-G40
- hojas de producto JVC
- folletos informativos
- o etiquetas energéticas JVC TH-G40
Todos son importantes, pero lo más importante desde el punto de vista del usuario de un dispositivo lo encontraremos en el manual de instrucciones JVC TH-G40.

Un conjunto de documentos determinado como manual de instrucciones se divide también en tipos más detallados, tales como: instrucciones de montaje JVC TH-G40, instrucciones de servicio, instrucciones cortas o instrucciones de usuario JVC TH-G40. Dependiendo de la situación debes buscar el documento que necesitas. En nuestra página puedes consultar el manual de instrucciones más popular del producto JVC TH-G40.

Manuales de instrucciones parecidos

El manual de instrucciones del dispositivo JVC TH-G40, ¿cómo debería ser?
El manual de instrucciones, también determinado como el manual de usuario o simplemente instrucciones, es un documento técnico que tiene como objetivo ayudar a los usuarios a utilizar JVC TH-G40. Las instrucciones normalmente las realiza un escritor técnico pero en un lenguaje comprensible para todos los usuarios de JVC TH-G40.

El manual de instrucciones completo de JVC debe contener unos elementos básicos. Una parte de ellos es menos importante, como por ejemplo: la portada / la página principal o las páginas de autor. Sin embargo, lo demás debe facilitarnos la información más importante desde el punto de vista del usuario.

1. Introducción y pistas sobre cómo orientarse con el manual JVC TH-G40 - Al principio de cada manual se deben encontrar las indicaciones acerca de la manera de usar un manual de instrucciones. Debe contener información sobre dónde encontrar el índice JVC TH-G40, preguntas frecuentes o problemas más comunes – son los apartados más buscados por los usuarios de cada manual de instrucciones.
2. Índice - listados de todos los consejos acerca de JVC TH-G40 que encontraremos en el documento
3. Consejos de uso de las funciones básicas del dispositivo JVC TH-G40 - que deben facilitarnos los primeros pasos durante el uso de JVC TH-G40
4. Troubleshooting - una secuencia sistematizada de acciones que nos ayudará a diagnosticar los problemas más importantes con JVC TH-G40
5. FAQ - las preguntas frecuentes
6. Datos de contacto Información acerca de cómo encontrar los datos de contacto del fabricante / servicio de JVC TH-G40 en cada país si no somos capaces de solucionar el problema por nuestra cuenta.

¿Tienes una pregunta acerca de JVC TH-G40?

Utiliza el formulario que se encuentra abajo

Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con JVC TH-G40, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con JVC TH-G40 probablemente compartirá una forma de solucionarlo.

Copia el texto de la imagen

Captcha
Nueva imagen

Comentarios (0)