-
Omron 705CP-II - page 1
Instruction manual page 1 Gebrauchsanweisung Seite 23 Gebruiksaanwijzing pagina 45 Mode demploi page 67 Istruzioni per luso pagina 89 Instrucciones de uso pagina 1 1 1 Automatic Blood Pressure Monitor & Printer The World Hypertension League recommends regular blood pressure monitoring with clinically validated devices. 705CP-II IM-HEM-759 ...
-
Omron 705CP-II - page 2
705CP-II English Dear Customer Contents Blood pressure monitor Important instructions to help you obtain meaningful readings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Y our blood pressure monitor: the benefits . . . . . . . . . . . 3 Battery installation / replacement . . . . . . . . . . . . . . . . . . . . 4 How to set ti ...
-
Omron 705CP-II - page 3
2 705CP-II English The World Hypertension League recommends regular blood pressure monitoring by doctors and patients with clinically validated devices Regular blood pressure monitoring is essential for the prevention, the control and the management of hypertension. It also helps to support the doctors' work. The World Hypertension League is a ...
-
Omron 705CP-II - page 4
3 705CP-II English ON/OFF (O/I) button ST ART ( ) button OMRON 705CP-II is a compact, fully automatic blood pressure monitor , operating on the oscillometric principle. It measures your blood pressure and pulse rate simply and quickly . It contains an intel ligent “fuzzy logic” system for controlled inflation, known as “Intellisense”. This ...
-
Omron 705CP-II - page 5
4 705CP-II English Battery installation / replacement Slide the battery cover off in the direction of the arrow . Install or replace 4 “LR6” batteries so the + (positive) and – (negative) polarities match the polarities of the battery compartment as indicated. Replace the battery cover . NOTES : If the Low Battery Indicator ( ) ap ...
-
Omron 705CP-II - page 6
5 705CP-II English How to set time and date Install the batteries and press the ON/OFF button. The display will show 0:00 Press and hold the SET button. The year digits (2002) will flash. Press the ADJUST button to advance the digit(s) one at a time. If you hold down the ADJUST button, the digits will advance rapidly . Press SETb ...
-
Omron 705CP-II - page 7
6 705CP-II English How to apply the cuf f (when wrapping on your left arm) • Y ou can wrap the cuff either on your right or left arm. Insert air tube to air jack (on the left side of the divice). The cuf f must be airless. Remove tight-fitting clothing from your upper arm. Sit in a chair with your feet flat on the floor and place your ...
-
Omron 705CP-II - page 8
7 705CP-II English Pull the cuff so that the top and bottom edges are tightened evenly around your arm. When the cuff is positioned correctly , close the velcro fastener FIRML Y . Make certain the cuff fits snugly around your arm. The cuff should make good contact with your skin. Y ou should be able to fit your index finger between the ...
-
Omron 705CP-II - page 9
8 705CP-II English How to take a reading Press the (O/I) button. a) All display symbols appear for approximately one second. b) When the monitor becomes ready to measure, the ( ) symbol appears on the display . Press the (ST ART ) button and remain still. As the cuff begins to inflate, the monitor automatically determines your ideal inflati ...
-
Omron 705CP-II - page 10
9 705CP-II English START Continue to press button When the measurement is complete, the cuff completely deflates and your blood pressure and pulse rate are displayed. NOTE : The monitor automatically stores blood pressure and pulse rate into the memory . • When 28 sets of readings are stored in memory , the oldest set will be deleted to store ...
-
Omron 705CP-II - page 11
10 705CP-II English How to use the memory function This monitor has a memory capable of storing 28 sets of readings. Every time you complete the measurement, the monitor automatically stores blood pressure and pulse rate. • T urn on the monitor by pressing the (O/I) button. • Press the ( ) button to recall stored readings while the ( ) symbol i ...
-
Omron 705CP-II - page 12
11 705CP-II English • Before measuring, stretch your back and sit up straight, breath normally 5-6 times, relax your shoulders, arms and entire body . • Slightly bend and support your elbow (e.g. on a table). • Do not move, talk or touch the device during measurement. • Stress influences your blood pressure, so try to relax before taking a ...
-
Omron 705CP-II - page 13
12 705CP-II English Failure, causes and rectification Failure and their possible causes Incorrect measurement is indicated by 1. A correct reading could not be obtained because measurement was disturbed by movement of the body . 2. The cuff is not fitted correctly . 3. Y our clothing has constricted your blood flow . 4. There is still air in the cu ...
-
Omron 705CP-II - page 14
13 705CP-II English Maintenance and storage • For cleaning the monitor only use a soft, lightly moistened cloth. Do not use petroleum spirits, thinners or similar solvents ! • Stains on the cuff can be carefully removed using a moist cloth and soapy water . Do not wash the cuff or make it wet ! • Keep your blood pressure monitor in the storag ...
-
Omron 705CP-II - page 15
14 705CP-II English T echnical data This device fulfils the provisions of the EC directive 93/42/EEC (Medical Device Direc tive). This blood pressure monitor is designed according to the European standard EN1060, Non-invasive sphygmo- manometers Part 1: General requirements and Part 3: Supple mentary requirements for electromechani - cal blood pres ...
-
Omron 705CP-II - page 16
15 705CP-II English OMRON spare parts Calibration The accuracy of this blood pressure monitor has been carefully tested and is designed for a long service life. It is generally recommended to have the monitor inspected every two years to ensure correct functioning and accuracy . Please consult your authorised dealer or the OMRON Customer Service at ...
-
Omron 705CP-II - page 17
16 705CP-II English Some useful information about blood pressure What is Blood Pressure ? Blood pressure is a measure of the force of blood flowing against the walls of the arteries. Arterial blood pressure is constantly changing during the course of the hearts cycle. The highest pressure in the cycle is called the SYST OLIC BLOOD PRESSURE; the ...
-
Omron 705CP-II - page 18
17 705CP-II English What Causes High Blood Pressure ? Blood pressure is only classed as high if it doesnt go down when you rest. Permanently raised blood pressure can be caused by several factors such as hardening of the arteries, smoking or drinking too much alcohol. It can also be caused by cholesterol, a type of fat, building up inside your b ...
-
Omron 705CP-II - page 19
18 705CP-II English Introduction The OMRON printer can be conected to OMRON blood pressure monitors with IT functions. Description Paper Feed Print Graph Print All Data Print Current Data/Stop Printing Printer Cover Printer Cable Plug Power/Operation Light Battery installation / replacement Slide the battery cover off in the direction of the ar ...
-
Omron 705CP-II - page 20
19 705CP-II English How to connect the printer unit Remove printer cable plug from the printer unit. Connect printer cable plug cord to the main unit. The circle on the cable plug should face up. Open printer cover in the direction indicated by the arrow symbol and remove paper roll from the main unit. Peel of the glued edge of the ...
-
Omron 705CP-II - page 21
20 705CP-II English OMRON IT blood pressure monitors have the ability to print all the readings stored in memory . NOTE : • Make sure printer-unit is connected to main unit (see How to Connect Printer-Unit) • Do not use printer-unit without loading printer paper (see How to Load Printer Paper). Improper use will decrease operation life cycle of ...
-
Omron 705CP-II - page 22
21 705CP-II English • Month(s) The month or months will be printed. Example: If the blood pressure reading was stored between months March-June, then the printout will indicate “3-6”. • Date Only the days date (1-31) will be printed. Example: If the blood pressure reading was stored on June 1st, then the printout will indicate 1 under th ...
-
Omron 705CP-II - page 23
22 705CP-II English T roubleshooting Error Indicator Cause Correction Printer cable plug is not connected properly or damaged Connect correctly reference p.10 Contact your OMRON distributor . T ake paper jammed from the printer and install again Purchase new printer paper Batteries are worn No readings stored Printer paper is not installed correctl ...
-
Omron 705CP-II - page 24
OMRON HEALTHCARE Co., Ltd. 53, Kunotsubo, Terado-cho, Muko, Kyoto, 617-0002 JAPAN OMRON HEALTHCARE EUROPE B.V. Scorpius 33, 2132 LR Hoofddorp, THE NETHERLANDS www.omron-healthcare.com OMRON (DALIAN) CO., LTD. Dalian, CHINA OMRON HEALTHCARE UK LTD. Opal Drive, Fox Milne, Milton Keynes, MK15 0DG, U.K. OMRON MEDIZINTECHNIK HANDELSGESELLSCHAFT mbH John ...
¿Tienes una pregunta acerca de Omron 705CP-II?
Utiliza el formulario que se encuentra abajo
Si con la ayuda del manual de instrucciones encontrado no has podido solucionar tu problema con Omron 705CP-II, haz una pregunta utilizando el formulario que se encuentra abajo. Si alguno de los usuarios ha tenido un problema parecido con Omron 705CP-II probablemente compartirá una forma de solucionarlo.